Philips 220bw8e User Manual

							
BLUE - NEUTRAL (N) 
BROWN - LIVE (L) 
GREEN & YELLOW - EARTH (E) 
1. The GREEN AND YELLOW wire must be 
connected to the terminal in the plug which 
is marked with the letter E or by the Earth 
symbol 
 or coloured GREEN or GREEN 
AND YELLOW. 
2. The BLUE wire must be connected to the 
terminal which is marked with the letter N 
or coloured BLACK. 
3. The BROWN wire must be connected to 
the terminal which marked with the letter L 
or coloured RED. 
Before replacing the plug cover, make 
certain that the cord grip is clamped over the 
sheath of the lead - not simply over the three 
wires. 
 
 
RETURN TO TOP OF THE PAGE
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
 This marking on the product or on its packaging illustrates that, under\
 European 
Directive 2002/96/EG governing used electrical and electronic appliances\
, this product may 
not be disposed of with normal household waste. You are responsible for \
disposal of this 
equipment through a designated waste electrical and electronic equipment\
 collection. To 
determine the locations for dropping off such waste electrical and elect\
ronic, contact your 
local government office, the waste disposal organization that serves you\
r household or the 
store at which you purchased the product.
 
 
						

							
RETURN TO TOP OF THE PAGE 
China RoHS 
 
RETURN TO TOP OF THE PAGE 
       
 
						

							
   
       
 
 
• Safety and  Troubleshooting
 • FAQs
 • Troubleshooting
 • Regulatory Information
 
•Information 
for Users in the 
U.S
 •Information 
for Users 
Outside the U.S
  
  
  
    
Other Related Information
Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three 
conductor cord a maximum of 15-feet long and a parallel blade, grounding\
 type attachment 
plug rated 15 A, 125 V. 
For units set at 230 V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three 
conductor cord a maximum of 15-feet long and a tandem blade, grounding t\
ype attachment 
plug rated 15 A, 250 V. 
Information for Users outside the U.S.
For units set at 230 V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type at\
tachment plug 
rated 15 A, 250 V. The Cord Set should have the appropriate safety appro\
vals for the country 
in which the equipment will be installed and / or be marked HAR. 
 
RETURN TO TOP OF THE PAGE 
          
   
 
      
 
						

							
   
       
 
 • About This 
Guide
 • Notational Descriptions
  
  
  
  
 
About This Manual
About This Guide
This electronic users guide is intended for anyone who uses the Philips\
 LCD Monitor. It 
describes the LCD monitors features, setup, operation and other importa\
nt information. 
Its contents are identical to the information in our printed version.
It includes the following sections:
l     Safety and Troubleshooting Information provides tips and solutions for common 
problems as well as other related information you may need.
 
l     About This Electronic Users Manual gives an overview of information inc\
luded, 
along with notation icon descriptions and other documentation for your r\
eference.
 
l     Product Information gives an overview of the monitors features as well as the 
technical specifications for this monitor.
 
l     Installing Your Monitor describes the initial setup process and gives an overview of 
how to use the monitor. 
l     On-Screen Display provides information on adjusting the settings on your monitor. 
l     Customer Care and Warranty contains a list of worldwide Philips Consumer 
Information Centers along with help desk phone numbers and information o\
n the 
warranty applicable to your product.
 
l     Glossary defines technical terms. 
l     Download and Print Option transfers this entire manual to your hard drive for easy 
reference.
   
RETURN TO TOP OF THE PAGE
 
Notational Descriptions
The following subsections describe notational conventions used in this d\
ocument. 
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and \
printed in bold 
or italic type. These blocks contain notes, cautions or warnings. They a\
re used as follows:
NOTE: This icon indicates important information and tips that help you m\
ake 
better use of your computer system.
    
   
 
 
						

							
CAUTION: This icon indicates information that tells you how to avoid eit\
her 
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you\
 how 
to avoid the problem.
 
Some warnings may appear in alternate formats and may not be accompanied\
 by an icon. 
In such cases, the specific presentation of the warning is mandated by t\
he relevant 
regulatory authority.
 
RETURN TO TOP OF THE PAGE

©2007 Koninklijke Philips Electronics NV
All rights reserved. Reproduction, copying, use, modification, hiring, r\
enting, public performance, 
transmission and/or broadcasting in whole or in part is prohibited witho\
ut written consent of Philips 
Electronics NV
  
 
 
      
 
						

							
• Product  
Features 
• SmartImage  
Lite 
• Smart 
Response 
• Lead-free 
Product 
• Technical 
Specifications 
• Resolution &  
Preset Modes 
• Philips Pixel  
Defect Policy 
• Automatic 
Power Saving 
• Physical 
Specification 
• Pin 
Assignment 
• Product 
Views 
• Physical 
Function 
• SmartManage 
Product Information  
Product Features 
220BW8 
SmartImage Lite (Selective Models)  
Introduction 
Philips SmartImage Lite features with Philips LightFrame technology to e\
nhance your front of  
screen performance depend by content type. It is changing brightness or \
contrast profiles to  
enrich color of image and sharpen text. No matter your application is on\
 text processing or  
watching image or video, you can always get (Selective Models) best vi\
ewing experience from  
Philips SmartImage Lite. 
How to enable SmartImage Lite 
RETURN TO TOP OF THE PAGE 
•Designed for maximum productivity
•Tilt, swivel and height-adjust for an ideal viewing position
•Big, widescreen ideal for viewing two A4 pages side-by-side
•Best total cost of ownership solution
•Empowered for Windows Vista
•Complies with RoHS standards to care for the environment
•Outstanding front of screen performance
•WSXGA, wide format 1680x1050 resolution for sharper display
•5ms fast response time
•Great convenience
•Built-in speakers for audio without desktop clutter
•Adjust display settings with hot key or on-screen controls
•DVI-D input and HDCP support
  
•Power consumption below the industry average
•Dual input accepts both analog VGA and digital DVI signals
 
						

							
 
1.  
Press  to launch the SmartImage Lite on screen display;
2.  Keep press  to toggle between Office Work, Internet, Image Viewing, Video Playback,\
 
Gaming, and Off;
3.  The SmartImage Lite on screen display will remain on screen for 5 second\
s or you can 
also press “OK“ to make confirmation.
4.  When smartlmage Lite is enabled, the sRGB scheme is disabled automatical\
ly. To use 
sRGB you need to disable Smartlmage Lite with the 
 button at the front bezel of your 
monitor
Except using 
  key to scroll down, you can also press    buttons to choose and press 
“ok” to confirm selection and close the SmartImage Lite OSD.
There are six modes to be selected:
1.  Office Work: Select this mode for general office application, like word \
processing, 
spreadsheet, and email.  The screen is dominated by text.
2.  Internet: Select this mode for Internet application, especially web brow\
sing.  The screen 
is mixed by text and picture.
3.  Image Viewing: Select this mode for image viewing application, especiall\
y in slid show.  
The screen is dominated by picture.
4.  Video Playback: Select this mode for video application, like Microsoft M\
edia Player or 
Real Player.  The screen is dominated by video.
5.  Gaming:  Select this mode for PC game software. The screen is dominated \
by artificial 
animation with rich color.
6.  Off: No optimization by SmartImage Lite.
 
SmartResponse (Selective Models) Product 
What it is? 
SmartResponse is exclusive Philips technology that adjusts response time\
 to application 
requirements, delivering faster response times for gaming and videos or \
better color saturation 
for viewing photos and static images.
Why Need it? 
You want optimal display for every type of application: Static or steady\
 image display without 
‘noise’ or color shifting as well as blurring and ghosting-free pe\
rformance when viewing action 
movies or videos. 
How to use it? 
Select the video and gaming playback profile to ramp up response time fo\
r blur and ghosting-
free display of fast-moving images in action movies or videos; choose th\
e image viewing 
profile for optimal display of steady or static images without noise o\
r color shifting when 
working with image viewing or other multipurpose applications. 
Where will it be effective? 
1. When you select SmartImage Lite profiles from SmartImage button, cert\
ain preset profiles 
 
						

							
had configured proper SmartResponse setting. 
a. Internet - SmartResponse will turn on with low level enhancement to r\
educe motion blur 
when scrolling web page. 
b. Video Playback - SmartResponse will turn on with medium level enhance\
ment to reduce 
motion blur. 
c. Gaming - SmartResponse will turn on with high level enhancement to gi\
ve gamer fastest 
LCD display response. 
d. Other profiles settings like, Office Work, Image Viewing and Off\
, turn off 
SmartResponse  to offer optimal color performance. 
2. You can also turn it on or off manually via OSD/More Settings/Sma\
rtResponse. The 
default setting is off.RETURN TO TOP OF THE PAGE
Lead-free Product 
Philips eliminated toxic substances like lead from its displays. Lead-fr\
ee display 
helps protect your health and promotes environmentally sound recovery an\
d 
disposal of waste from electrical and electronic equipment.Philips compl\
ies with 
the European Community stringent RoHS Directive mandating restrictions o\
n 
hazardous substances in electrical and electronic equipment. With Philip\
s, you 
can be confident that your display device does not harm the environment.\

Technical Specifications* 
LCD PANEL 
• Type TFT LCD
• Screen size 22 / 55.8 cm diagonal
• Pixel Pitch 0.282 x 0.282 mm
• LCD Panel type  1680 x 1050 pixels
R.G.B. vertical stripe 
Anti-glare polarizer, hard coated
 
• Effective viewing area 473.76 x 296.1 mm
SCANNING
Vertical refresh rate
56 Hz-76 Hz
Horizontal Frequency 30 kHz-83 kHz
VIDEO
• Video dot rate165 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2K ohm
 
						

							
• Input signal levels0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polaritiesPositive and negative
• Video interface Dual input: D-Sub (analog) and DVI-D (digital) are available and 
user selectable
• SmartImage Lite 
(Selective Models)Brightness, contrast, color, and sharpness enhancement
Audio (Selective Models)
• Loudspeaker 1W+1W Stereo Audio (1W/channel RMSx2, 20 Hz-20 kHz, 8 ohm) 
• Stand-alone audio 
output
Whether there is a video display or not as long as there is an 
audio input, the audio output is always functional. 
Optical characteristics 
• Peak contrast angle6 oclock
• White Chromaticity
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB) 
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE

Resolution & Preset Modes
• Maximum1680 x 1050 at 60 Hz (analog input)
1680 x 1050 at 60 Hz (digital input)
• Recommended 1680 x 1050 at 60 Hz (digital input)
24 user definable modes
18 factory preset modes:
 
						

							
H.freq (kHz)Resolution V. freq (Hz)
31.47 640*350 70
31.47 640*480 60
35 640*480 67
37.5 640*480 75
31.47 720*400 70
35.16 800*600 5
6

37.88 800*600 60
46.88 800*600 75
48.36 1024*768 60
60.02 1024*768 75
63.98 1280*1024 60
79.98 1280*1024 75
55.47 1440*900 60
55.94 1440*900 60
70.64 1440*900 75
65.29 1680*1050 60
64.67 1680*1050 60
66.59 1920*1080 60 (for DVI-D)
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor 
can automatically reduce its power consumption when not in use. If an input from a keyboard, 
mouse or other input device is detected, the monitor will 'wake up' automatically. The following 
table shows the power consumption and signaling of this automatic power saving feature: 
Power Management Definition
VESA Mode VideoH-syncV-syncPower Used LED color