Philips 220bw8e User Manual

•Front View 
Produt
Description
•
Connecting
to Your PC
•Getting
Started
•Optimizing
Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitor’s power on and off
2MENUTo access OSD menu
3Hot key of Contrast adjustment and To adjust OSD value up 
when OSD menu is active
4Hot key of Brightness adjustment and To adjust OSD value 
down when OSD menu is active 
5Automatically adjust the horizontal position, vertical position, 
phase and clock settings
RETURN TO TOP OF THE...

1AC power input
2DVI-D input
3VGA input
4Kensington anti-thief lock
5PC Audio input
6Speaker
RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at 1680x1050, 60Hz.
Note: To check the current display resolution, press the 'OK' button once. 
The current display mode is shown on the OSD. If the display setting is not 
optimized, a warning string "USE 1680x1050 FOR BEST RESULT" appears in 
the OSD menu.
You can also install the...

•Front View 
Product
Description
• Accessory 
Pack
• Connecting  to Your PC
• Getting  Started
• Optimizing  Performance
Connecting to Your PC
Accessory Pack
Unpack all the parts.
Power cord VGA cable
Audio cable EDFU CD
DVI cable (Optional)
RETURN TO TOP OF THE PAGE
Connecting to Your PC
1)
220BW
 

2)
3) Cable management
4)Connect to PC
W WB
B0
022
2
4
1325
1
 

(1)AC power input
(2) DVI-D input
(3) VGA input
(4) Kensington anti-thief lock
(5) PC Audio input
(6) Set your Monitor at 1680x1050@60Hz for best performance. It is also 
strongly recommended to use DVI input (may require the optional DVI cable) 
for the true digital enjoyment.
RETURN TO TOP OF THE PAGE
 

Your LCD 
Monitor :
•Front View 
Product
Description
• Setting Up 
and
Connecting
Your
Monitor
• Getting 
Started
• Optimizing  Performance
Getting Started 
Getting Started
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP /Vista or later
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements 
for Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) should be installed in
order that your Philips monitor can be enabled from the 'Monitor'...

7.Select 'Display a list of the known drivers for this device so that I can choose a 
specific driver', then click on 'Next' and then click on 'Have disk...'. 
8.Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM 
Drive).
9.Click on the 'Open' button, then click on the 'OK' button. 
10.Select your monitor model and click on the 'Next' button. 
11.Click on the 'Finish' button then the 'Close' button. 
If...

For Windows® Vista 
1. Start Windows® Vista 
2. Click the Start button; select and click on Control Panel. 
3. Select and click on Hardware and Sound 
4. Choose Device Manager and Click on Update device drivers. 
5. Select Monitor and then right click on Generic PnP Monitor. 
6. Click on Update Driver Software. 
7. Select Browse my computer for driver software.  
8. Click the Browsebutton and choose the drive in which youve placed the\
 disk. 
Example: (CD-ROM Drive:\\Lcd\PC\drivers\).  
9. Click the...

On-Screen Display
Description of the On Screen Display
What is the On-Screen Display?
On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to 
adjust screen performance or select functions of the monitors directly through an on-screen 
instruction window. A user friendly on screen display interface is shown as below :
Basic and simple instruction on the control keys.
In the OSD shown above users can press 
 buttons on the right side of the monitor to 
move the cursor,...