Philips 21 9 Manual

							1.5Help and support
Using  Help  and Search
Help
You   can   open   Help   from  the   Home  menu.  In   most  cases,  you
can   also  press   the   yellow  key  on   your   remote   control   to  open
or  close  Help   directly.   For  some   activities,   like   Text,   the   colour
keys   have   specific   functions  and  cannot   open   Help.
Before   you   follow  the   Help   instructions,  close  Help.  Press   the
yellow   key  or  press   h  to  close  Help.  When   you   press   the
yellow   key  again,   Help   will   open   on   the   page  where   you   closed
it.
¬   Search
In   Help,  use  ¬  Search   to  find  a  topic  you   need.   Select   a  topic
from  the   list   with   the   navigation   keys   and  press   OK.  The  topic
you   are   looking   for   might  not   be  on   the   first  page  but  a  few
pages  further   on.  Press   x  to  go  to  the   next  page.
Online support
To   solve  any   Philips  TV   related   problem,  you   can   consult   our
online   support.  You   can   select  your   language   and  enter  your
product  model   number.
Go   to  www.philips.com/support
On  the   support   site  you   can   find  your   countrys   telephone
number  to  contact   us  as   well   as   answers   to  frequently   asked
questions   (FAQs).
You   can   download   new   TV   software   or  the   manual   to  read  on
your   PC.   You   can   email   a  specific   question   or,   in   some   countries,
chat  online   to  one  of   our   collaborators.
Consumer Care
For  support,  you   can   call  the   Consumer   Care   hotline   in   your
country.   Find  the   telephone  number  in   the   printed   documentation
that  came  with   the   TV.
Or   consult   our   website   www.philips.com/support
TV  model  number   and  serial   number
You   might  be  asked  to  provide  the   TV   product  model   number
and  serial  number.   Find  these  numbers  on   the   packaging  label   or
on   the   type   label   on   the   back   or  bottom  of   the   TV.
Getting   started   /   Help   and  support11 
						

							2
2.1
Basics
Remote control
Overview
1   Standby  O
To   switch   the   TV   on   or  back   to  standby.
2   Home  h
To   open   or  close  the   Home  menu.
3   Navigation  key
To   navigate   up,  down,  left  or  right.
4   OK   key
To   activate  a  selection.
5   Find   ¬
To   open   or  close  the   channel  list   or  your   list   of   photos,   music  or
movies.
6   Adjust   t
To   open   or  close  the   most  used   settings   for   picture,   sound,
Ambilight  or  3D.
7   CH+   /   Next  W
To   switch   to  the   next  channel,   page  or  chapter.
8   CH-  /   Previous   X
To   switch   to  the   previous  channel,   page  or  chapter.
9   Source   Ú
To   switch   directly   to  a  TV   connection.
10  Options  r
To   open   or  close  the   Options  menu.
11  Back   È
To   go  back   to  the   previous  channel.   To   exit   a  menu   without
changing   a  setting.   To   go  back   to  the   previous  Text   or  Net  TV
page.
12  Volume   V
To   adjust   the   volume   level.
13  Mute  m
To   mute   the   sound   or  to  restore   it.
12Basics   /   Remote   control 
						

							14  Red   colour  key
To   open   interactive   TV   or  to  select  a  Text   page.
15  Green   colour  key
To   open   the   Eco   settings   or  to  select  a  Text   page.
16  Yellow   colour  key
To   select  a  Text   page.
17  Blue  colour  key
To   select  a  Text   page.
18  Number  keys   and  text  keypad
To   select  a  TV   channel  directly   or  to  enter  text.
19  Exit
To   exit   MHP.  /   Keep  this   key  pressed   for   3   seconds   to  open   or
close  the   Format   menu.
20  Teletext  /   Info
To   open   or  close  text.  /   Keep  this   key  pressed   for   3   seconds   to
open   or  close  information  on   next  programmes.
Operate devices
The  remote   control   of   the   TV   can   also  operate  a  connected
device.   The  device   must   have   EasyLink   (HDMI -CEC)  and  have   it
switched   on.  The  device   must   also  be  connected   with   an   HDMI
cable.
Operate  an   EasyLink  device
To   operate  such  a  device   with   the   TV   remote   control,  select  the
device   -or  its  activity -  in   the  h  Home  menu   and  press   OK.
The  commands   of   all   keys,  except  the   h  key,   the   t  ADJUST
key  and  the   r  OPTIONS   key,   are   forwarded  to  the   device.
Switch   back  to  TV
To   switch   the   remote   control   back   to  operate  the   TV,   press   h
(Home)  and  select  Watch  TV  and  press   OK.
Show   device   keys
When   operating   a  device,   some   of   the   keys   might  not   be
available   on   the   TV   remote   control.  To   make  these  keys
selectable   on   TV,   press   r  OPTIONS   and  select Show   device
keys .  Select   the   key  you   need  and  press   OK.
To   hide   the   device   keys,  press   È  (Back).
In   general,  these  keys   open   the   following  device   menus:
1  Home  menu
2   Setup   menu
3   Disc   menu   (disc   content)
4   Pop -up  menu
5   Options  menu
6   Programme   guide
7   Media   selection
One   Touch   Play
Insert   a  disc  into  an   EasyLink   HDMI -CEC  device   and  press   Play
on   the   device.   The  TV   switches  on   from  standby   and  starts
playing  the   disc.
System  Audio   Control
If   you   connect   an   EasyLink   audio   system,  you   can   listen   to  the
audio   from  the   TV   through  the   audio   system.  The  TV   speakers
are   muted  automatically.   You   can   control   the   volume   of   the
audio   system   with   the   TV   remote   control.
Surround   mode
With   recent   Philips  devices,   you   can   change  the   surround  sound
setting  of   the   device   on   the   TV.   To   change  this   setting,   press   t
ADJUST ,  select Surround   mode   and  press  OK. On  Next  mode ,
press   OK  to  toggle   through  the   available   modes  on   the   device.
Smart   sound
With   recent   Philips  devices,   you   can   change  the   Smart  sound
setting  of   the   device   on   the   TV.   To   change  this   setting,   press   t
ADJUST ,  select Smart   sound   and  press  OK.  Select   a  sound
mode  from  the   list.
Screen  off
If   a  recent   Philips  audio   device   only  sends  audio   to  the   TV,   the
device   may   suggest   switching   off   the   TV   screen.  To   switch   off
the   screen  when   this   message  appears,  select  Screen  off and
press   OK.  To   switch   the   screen  back   on,  press   h  (Home).
System  Standby
Press   O  on   the   remote   control   to  switch   the   TV   and  all
EasyLink   devices  to  standby.
Read  more   about   EasyLink   in   Help > Setup  > Devices  >
EasyLink  HDMI-CEC .
IR  sensor
Always  make  sure  you   point   the   remote   control   at  the   remote
control  infrared  sensor   on   the   front   of   the   TV.
Basics   /   Remote   control13 
						

							Batteries
To   open   the   battery  cover,   press   the   small   button  on   the   edge
of   the   remote   control   inwards   and  lift   the   cover.   Use  2   type
AAA -LR03 -1.5V  batteries.  Make   sure  the   +  and  the   -  ends   of   the
batteries   line   up  correctly.
Remove   the   batteries   if  you   are   not   using  the   remote   control   for
a  long  time.
Dispose   of   batteries   according  to  the   end   of   use  directives.  Read
Help > Specifications  > Environmental  > End  of   use.
Cleaning
Your   remote   control   is  treated   with   a  scratch-resistant   coating.
To   clean   the   remote   control,  use  a  soft  damp  cloth.   Never   use
substances  such  as   alcohol,  chemicals  or  household  cleaners   on
the   TV   or  remote   control.
14Basics   /   Remote   control 
						

							2.2Menus
h Home
In   the   Home  menu,  you   start   watching   TV   or  start   watching   a
movie  disc   or  any   other   TV   activity.
Press   h  to  open   the   Home  menu.
To   start   an   activity,  select  it   with   the   navigation   keys   and  press
OK .
To   close  the   Home  menu,  press   h  again.
Add   your  devices
A   connected   device   should   be  added  to  the   Home  menu   for
easy   selection.
If   your   connected   device   does  not   have   EasyLink   (HDMI -CEC)
or  is  not   connected   with   an   HDMI   cable,  you   need  to  manually
add   your   device   to  the   Home  menu   with   Add   your  devices.
Devices  with   EasyLink   (HDMI -CEC)  and  connected   with   an
HDMI   cable   automatically  show  their   activity   in   the   Home  menu.
A   single   device   can   add   several   activities.
If   an   EasyLink   device   does  not   appear   automatically,   EasyLink   on
the   device   may   be  switched   off.
Add   a  device   manually
In   the   Home  menu,  select  Add   your  devices  and  press  OK.
Follow   the   instructions   on   screen.
The  TV   asks   you   to  select  the   device   and  the   connection   to
which  the   device   is  connected.
The  device   or  its  activities   are   now  added  to  the   Home  menu.
Rename   a  device
To   rename   an   added  device   or  activity,  select  the   device   in   the
Home  menu   and  press   r  OPTIONS   and  select Rename.  Use
the   keypad  on   the   remote   control   as   you   do   for   SMS/text
messaging   to  enter  the   new   name.
Remove  a  device
To   remove   a  device   or  activity   from  the   Home  menu,  select  it
and  press   r  OPTIONS   and  then  select  Remove  this  device .  If
a  device   or  activity   keeps   appearing   in   the   Home  menu   after   you
deleted   it,  switch   off   the   EasyLink   setting  on   the   device   to
prevent   the   icon  from  being  automatically  added  again.
Read  more   about   EasyLink   in   Help > Basics  > Remote  control  >
Operate  devices .
Reorder
To  reorder   a  device   or  an   activity   in   the   Home  menu,  select  it
and  press   r  OPTIONS .
1   Select   Reorder .
2   With   the   navigation   keys,  reposition   the   device   or  activity
where   you   want   it.  You   can   only  reorder   the   sequence   of   the
added  devices  and  activities.
3   Press   OK  to  confirm  the   position.  All   devices  and  activities   shift
to  the   right.
You   can   highlight  another  device   or  activity   and  reposition   it.
To   stop   Reorder,  press   r  OPTIONS   and  select Exit  reorder .
Restore   device   activities
To   recall   a  deleted   activity   from  a  device   with   several   activities,
select  the   device   or  one  of   its  activities   and  press   r  OPTIONS .
Select   Restore   device   activities   and  press  OK.  All   deleted
activities   of   this   device   appear   again.
¬  FIND
With   ¬  FIND   you   open   the   Channel   list   while   you   are
watching   TV   channels   or  you   open   the   list   of   pictures,   music  and
videos   while   browsing  your   PC  or  connected   USB   device.
Press   ¬  FIND   to  open   the   list.
To   close  the   list,  press   ¬  again.
t  ADJUST
With   the   ADJUST   menu,  you   can   adjust  picture,   sound,
Ambilight  and  3D   settings   quickly.
Press   t  ADJUST   to  open   the   Adjust  menu.
Select   your   choice  with   the   navigation   keys   and  press   OK.
To   close  the   menu,  press   t  ADJUST   again.
Basics   /   Menus15 
						

							In   the   Adjust  menu   you   can   adjust   these  settings:
•   3D
•   3D   depth
•   Two   player   gaming
•   Ambilight  On  or  Off
•   Ambilight  dynamics
•   Picture   format
•   Smart  picture   (presets)
•   Smart  sound   (presets)
•   Speakers
•   Surround
•   Picture   shift
Ambilight
Read  more   about   the   Ambilight  settings   in  Help > Setup  >
Ambilight .
Picture  format
Read  more   about   the   Picture   format   settings   in   Help > Basics  >
Watch  TV  > Picture  format .
Smart   picture,  Smart   sound
You   can   set   the   TV   to  the   pre-defined   setting  that  best  suits
what   youre   watching.
Read  more   about   Smart  settings   in   Help > Basics  > Watch  TV
>  Smart   picture  and  sound .
Speakers
To   hear  the   sound   through  the   TV   speakers,  close  Help,  press   t
ADJUST ,  select Speakers   and  select  TV.
Select   Amplifier   if  you   want   to  hear  the   sound   through  a
connected   Home  Theatre  System   or  Amplifier.
These   settings   temporarily   override  any   EasyLink   settings.
Surround
To   switch   the   TV   automatically  to  the   best  surround  sound  mode
(only  available   when   a  Home  Theatre  System   is  connected),  close
Help,  press   t  ADJUST ,  select Surround   and  select  On.
Picture  shift
You   can   shift  the   picture   on   screen  in   a  vertical  or  a  horizontal
direction   to  view   subtitles   fully  (depending  on   the   TV   input).
While   watching   TV,   press   t  ADJUST ,  select Picture  shift  and
press   OK.  Shift   the   picture   with   the   navigation   keys.  Press   OK to
stop   Picture   shift.
r  OPTIONS
With   the   OPTIONS  menu,  you   select  optional  settings   related   to
what   you   are   watching   or  doing   on   TV.
Press   r  OPTIONS   at  any   time  to  see  which  options   are
available.
To   close  the   menu,  press   r  OPTIONS   again.
16Basics   /   Menus 
						

							2.3 Watch TV
Switch channels
To  watch   TV   and  switch   channels,  make  sure  the   Watch  TV
option   is  selected  in   the   Home  menu.
To   watch   TV,   press   h,  select  Watch  TV   and  press   OK.
To   switch   channels ,  press   CH+  or CH-   on   the   remote   control.
You   can   use  the   number  keys   if  you   know   the   channel  number
or  press   ¬  FIND   to  open   the   Channel   list   to  select  a  channel.
To   switch   back   to  the   previous  channel,   press   È  (Back).
Radio  channels
If   digital   broadcasting   is  available,  digital   radio  stations  are   installed
during  installation.   Switch   to  a  radio  channel  just   like   you   switch
to  a  TV   channel.   A   DVB-C   channel  installation  usually  places   radio
stations  from  channel  number  1001  onwards.
Options  for  watching   TV  channels
If   you   watch   digital   broadcast   TV   channels,  press   r  OPTIONS
to  view   the   available   options:
•   Whats   on
• Status
•   Video  selection
Whats  on
This   option   shows   information  on   the   current  and  next
programme   on   this   channel.   Use  the   navigation   keys   to  scroll
through  text   or  to  go  to  the   next  column.
Status
Depending  on   the   broadcast,  the   Status   page  will   show  relevant
information.   You   can   use  this   information  to  improve   the   channel
signal  or  to  check   if  certain  services   are   available.
Video   selection
Digital   TV   channels   can   offer   multi   video   signals  (multi -feed
broadcasts),   different   camera  viewpoints  or  angles   of   the   same
event  or  different   programmes   on   one  TV   channel.   The  TV
shows   a  message  to  advise   if  any   such  TV   channels   are   available.
When   available,  press   r  OPTIONS   and  select Video   selection
to  select  your   choice.
Channel  list
In   the   Channel   list,  you   can   look   up  all   installed   TV   and  radio
channels.
While   watching   TV,   press   ¬  FIND   to  open   the   Channel   list.
Press   ¬  FIND   again  or  È  (Back)   to  close  the   Channel   list
without   changing   the   channel.
In   the   Channel   list,  you   can   navigate   to  a  TV   channel  or  radio
station   and  press   OK  to  watch   the   TV   channel  or  listen   to  the
radio  station.
The  Channel   list   can   have   several   pages.   To   view   the   next  or
previous  Channel   list   page,   press   W  or  X.
Channel  list   options
With   the   Channel   list   on   screen,  press   r  OPTIONS   to  select
the   following  options :
•   Select   list
•   Mark  as   favourite
•   Reorder
•   Rename
Select  list
Use  this   option   to  select  which  channels   are   shown   in   the
Channel   list.  The  list   you   select  here   determines   which  channels
you   flick   through  with   CH+ and CH- .
Mark  as   favourite
When   a  channel  is  highlighted  in   the   Channel   list,  you   can   set   it
as   a  favourite  channel.
Read  Basics  > Watch  TV  > Favourite   channels .
Reorder
You   can   reposition   channels   within   the   list.
1   Press   r  OPTIONS   and  select Reorder  to  start   reordering
channels.
2   Highlight  a  channel  and  press   OK.
3   Reposition   the   channel  where   you   want   it   with   the   navigation
keys.  Alternatively,  enter  the   new   position   directly   with   the
number  keys.
Basics   /   Watch  TV17 
						

							4  Press   OK  to  confirm  the   position.  You   can   insert   the   channel
or  swap  it.
You   can   highlight  another  channel  and  do   the   same.
To   stop   Reorder,  press   r  OPTIONS   and  select Exit  reorder .
Rename
You   can   rename  a  channel  in   the   Channel   list.
1   In   the   channel  list,  highlight  the   channel  you   want   to  rename.
2   Press   r  OPTIONS   and  select Rename  to  start   renaming.   You
can   enter  text   directly   with   the   remote   control   keypad  or  open   a
full  keyboard  on   top   of   the   text   entry   menu.
Enter  text  with  the  remote   control  keypad
Use  the   navigation   keys   to  position   the   cursor   in   the   text.  Press
È   (Back)   to  delete  a  character.
Use  the   remote   control   keypad  as   you   do   for   SMS/text
messaging   to  enter  a  character.   Use  the   1  key  to  select  a  special
character.   Select   Clear  to  delete  a  character.
Select   Done  to  end   Rename.
Enter  text  with  the  on -screen   keyboard
To   open   the   on -screen  keyboard  on   top   of   the   text   entry   menu,
press   OK  when   the   cursor   in   the   text   flashes.
On  the   keyboard,   use  the   navigation   keys   to  highlight  a  character
and  press   OK  to  enter  it.  To   delete  a  character,   press   È  (Back)
or  highlight  !  and  press   OK.
To   switch   from  uppercase  to  lowercase   or  to  a  set   of   special
characters,   press   W  (Next)   or  X  (Previous).
To   edit   a  character  within   a  line   of   text,  position   the   cursor   on
this   character  and  use  the   z and Z   keys   at  both  ends   of   the
on -screen  spacebar.
To   close  the   on -screen  keyboard,   highlight  Done  and  press   OK.
USB  keyboard
You   can   use  a  connected   USB   keyboard  to  rename  channels.  To
connect   a  USB   keyboard,   read  Help > Connections  > Connect
more  devices  > Keyboard  and  mouse .
Favourite channels
In   the   Channel   list   you   can   mark  a  channel  as   a  favourite.   You
can   set   the   Channel   list   to  only  zap  through  your   list   of   favourite
channels .
To   open   the  Channel  list,  while   you   are   watching   TV   channels,
press   ¬  FIND .
Mark  a  channel  as   favourite
While   watching   TV,   press   ¬  FIND   to  open   the   Channel   list.
Navigate   to  the   channel  you   want   to  mark  as   favourite  and  press
r   OPTIONS .  Select  Mark  as   favourite .
In   the   Channel   list,  the   favourite  channel  is  marked   with   a  F.
You   can   unmark   a  favourite  channel  with   Unmark   favourite.
Channel  list   of   favourites
You   can   set   the   Channel   list   to  only  flick   through  your   favourite
channels.
With   the   list   on   screen,  press   r  OPTIONS   and  select Select
list .  Select   Favourites   from  the   list   and  press   OK.  With   this   list
selected,   you   will   only  flick   through  your   favourites.
Programme guide
If   programme   guide  information  is  available   in   your   area,  you   can
open   an   on -screen  programme   guide  with   scheduled   TV
programmes.  
The  Programme   guide  is  provided   by   the   broadcaster  or  Internet.
18Basics   /   Watch  TV 
						

							Open  the  Programme  guide
While   watching   TV,   press  h,  select  Programme  guide   and  press
OK .
To   quit   the   Programme   guide  without   changing   a  setting,   press
È   (Back).
First   use
The  first  time  you   open   the   Programme   guide,   the   TV   scans   all
TV   channels   for   programme   guide  information.   This   can   take
several   minutes.   The  data  is  stored  in   the   TV.   The  TV   can   store
programme   data  for   up  to  eight  days.
Programme  guide   options
With   a  programme   selected  in   the   guide,   press   r  OPTIONS  to
select  the   following:
•   Set   reminder
To   set   an   on -screen  reminder   for   when   a  programme   is  due   to
start,   select  Set   reminder   and  press  OK.  The  programme   is
marked   with   a  ©  (Clock).  To   cancel  this   reminder,  select  Clear
reminder   and  press   OK.
•  Change   day
View  the   previous  or  next  days   programmes.
•   More  info
Shows   the   programme   details   and  summary.
•   Search   by   genre
View  all   programmes   selected  by   genre.
•  Scheduled  reminders
If   a  reminder   is  set,  you   can   view   a  list   of   all   scheduled
reminders.
•  Update  programme   guide
After   the   first  scan,  the   TV   stores   the   programme   guide  data.  If
you   update   or  reinstall   channels   or  reorder   the   Channel   list,  you
will   need  to  update   the   Programme   guide.
To   update,   select  Update  programme   guide .  Reminders  are
cleared.
Broadcaster   or   Network
To   select  where   the   Programme   guide  information  comes   from,
press   h > Setup  > TV  settings  > Preferences  > Programme
guide .
Select   From  the  network   or From  the  broadcaster .
From  the  network
Until  you   link  up  with   Net  TV,   programme   guide  information
comes   from  the   broadcaster.   Once  you   are   connected   with   Net
TV,   the   TV   switches  automatically  to  the   Internet  for   programme
guide  information.
From  the  broadcaster
Guide   information  comes   from  the   broadcaster/operator.
Smart  picture  and sound settings
For  easy   picture   or  sound  adjustment,   you   can   select  a  preset
setting  for   each.
While   watching   TV,   press   t  ADJUST   to  open   the   Adjust  menu
and  select  Smart   picture   or Smart   sound .  Make   a  selection  from
the   list   and  press   OK.
Smart   picture  and  Smart   sound
Smart  settings   are   a  combination  of   preset   settings   suited  to  a
specific   use  such  as   gaming  or  daylight   viewing.
You   can   adjust   a  specific   setting,   like   Brightness   or  Contrast,   Bass
or  Treble,  of   a  chosen  smart  setting.   The  smart  setting  will
remember   the   adjustments  you   made.
Adjust   smart  settings
To   adjust   a  specific   setting  of   a  smart  setting,   select  the   smart
setting  and  press   OK.  Then   press   h  and  select  Setup.  Select
TV  settings ,  navigate   to  the   individual   setting  and  adjust   it.
To   return  to  the   original   smart  setting  values,  undo   the
adjustments  you   made  by   first  setting  the   TV   in   the   smart  setting
you   want   to  reset.   Then   press   h > Setup  > TV  settings ,  select
Reset   and  press   OK.
Read  more   about   adjusting   separate  settings   in   Help > Setup  >
Picture  and  Sound  and Ambilight .
Smart   picture  list
•   Personal   -  Your   choices  made  in   Personalise   picture   and  sound
•   Vivid   -  Ideal   for   daylight   viewing
•   Natural   -  Natural   picture   settings
•   Cinema   -  Ideal   for   watching   movies
•   Game   -  Ideal   for   gaming
•   Energy  saving   -  Energy-conscious   settings
•   Standard   -  Factory  standard   settings
•   Photo   -  Ideal   for   viewing   photos
•   ISF  Day  and ISF  Night   -  ISF   Calibration   settings
Smart   sound   list
•   Personal   -  Your   personal  choices  made  in   Personalise   picture
and  sound
•   Standard   -  Factory  standard
•   News   -  Ideal   for   speech
•   Movie   -  Ideal   for   watching   movies
•   Game   -  Ideal   for   gaming
•   Drama   -  Ideal   for   TV   soaps
•   Sports   -  Ideal   for   sports  programmes
Picture format
Basics   /   Watch  TV19 
						

							If  black  bars   appear   on   the   screen,  you   can   adjust   the   picture
format   to  a  format   that  fills   the   screen.
While   watching   TV,   press   t  ADJUST   to  open   the   Adjust  menu
and  select  Picture  format .  Select   a  format   from  the   list   and  press
OK .
Picture  formats
The  following  formats  are   available   according  to  the   picture   on
screen:
• Auto   fill
Automatically  enlarges  the   picture   to  fill   the   screen.  Minimal
picture   distortion,   subtitles   remain   visible.  Not   fit  for   PC  input.
•  Auto   zoom
Automatically  zooms   the   picture   in   to  fill   the   screen  as   much   as
possible   without   distortion.   Black  bars  may   be  visible.  Not   fit  for
PC  input.
•  16:9
Sets   the   picture   in   16:9   format   for   HD   16:9   broadcast.
•  Super  zoom
Removes  the   black  bars  on   the   side  of   4:3  broadcasts.   The
picture   is  adjusted   to  fit  the   screen.
•  Super  zoom  16:9
Sets   the   picture   in   16:9   format   with   minimal   distortion  for   4:3
broadcast.
•  Movie   expand   16:9
Scales   the   picture   to  a  16:9   format.
•  Cinema  21:9
Sets   the   picture   in   cinema  21:9   format  for   original   21:9   movies.
•  Cinema  21:9   subtitle
Sets   the   picture   in   cinema  21:9   format   but  subtitles  in   the
bottom  black  bar   are   visible.
•  Unscaled
Expert   mode  for   HD   or  PC  input.   Pixel  for   pixel  display.  Black
bars  may   appear   with   pictures  from  a  PC.
•  Wide   screen
Stretches  the   picture   to  a  16:9   format.
Multi view
With   Multi   view,  you   can   watch   two  screens   simultaneously.
When   you   open   Multi   view,  the   TV   shows   two  screens,  one
main  and  one  small   screen.
Open  Multi   view
To   open   Multi   view ,  press  h  (Home),   select  Multi   view and
press   OK.  With   the   remote   control   you   can   operate  the   main
screen.
To   close  Multi   view ,  press  EXIT  or  press   h  (Home)  and  select
another  activity.
Main   screen   picture
To   change  the   main  screen  picture,   press   ¬  FIND .  In   the   list,
select  what   you   want   to  watch   and  press   OK.
In   the   main  screen,  you   can   watch   a  TV   channel,   a  connected
device   (connected   with   HDMI),  the   Text   pages  of   the   TV
channel  you   are   watching,  a  Net  TV   app   or  Internet  page,   the   TV
Programme   guide  or  Help.
When   you   close  and  open   Multi   view   again,   the   last   selected
main  screen  is  shown.
Switch to standby
If   the   TV   is  on,  press   O  on   the   remote   control   to  switch   to
standby.  The  red  standby   key  indicator  is  on.
Although   the   TV   consumes   very  little  power   when   on   standby,
energy  does  continue  to  be  consumed.
When   you   do   not   use  the   TV   for   an   extended  period   of   time,
switch   the   TV   off   completely  with   the   power   switch.
Auto   switch   off
If   you   use  the   TV   as   a  monitor   or  use  a  digital   receiver   to  watch
TV   (a  set   top   box  -  STB)   and  you   do   not   use  the   remote
control   of   the   TV,   switch   off   the   automatic  switch   off.
This   will   prevent   the   TV   from  switching   off   automatically  after   a
4 -hour  period   without   a  key  press   on   the   remote   control   of   the
TV.
20Basics   /   Watch  TV