Philips 20pfl4122 User Manual
Here you can view all the pages of manual Philips 20pfl4122 User Manual. The Philips manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
5 Preparation Do not inser t the power plug in a wall socket before all connections are made. Place the T V on a solid sur face. For ventilation, leave at least 4” to 6” free all around the T V. Do not place the T V on a carpet . To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat , direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. Mounting the T V on the...
Page 12
6 Use of the remote control Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it. When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after six seconds or press OK to remove immediately. A/CH AVi+ A/CH AVi+ POWER Press to turn the LCD TV on or off. Sleep button Press to set the LCD TV to turn itself off within a certain time....
Page 13
7 Press this button to display a list of available display formats. Available display formats are determined by the type of signal you are receiving. To choose the display format you prefer, press the FORMAT button repeatedly: 4 : 3 Compress 16 : 9 HD 4 : 3 Expand 4 : 3 FORMAT For 20PFL4122 4:3, Expand 4:3, Compress 16:9, HD 4:3. A/CH AVi+ A/CH AVi+ Note: • For 720p/1080i, the default picture format will be 4:3 at HD and DVI modes. And the picture format function can be accessible. • For...
Page 14
8 Buttons on the top of the TV MENUVOLUMEPO WERPR OG RAM Should your remote be lost or broken you can still change some of the basic settings with the control buttons on your T V. Press: •the button to switch the T V on or of f. •the + VOLUME - button to adjust volume ; •the + PROGR AM - buttons to select the T V channels or sources, and can also switch the T V on during standby mode. The MENU button can be used to display the Settings menu without the remote control. MENU button can...
Page 15
9 To use the menus • Press the MENU button on the remote control to display the Settings menu. - Use cursor up /down to highlight and select a menu item on the lef t panel. The right panel shows the content of the menu you have highlighted in the lef t panel. Note: Sometimes not all the menu items are visible on the screen. Use cursor down to scroll down to additional items. - Use the cursor right to enter the right panel. The content of the right panel is moved to the lef t panel...
Page 16
10 TV menu-Install Notes: • Immediately after unpacking and plugging in your new television, run the auto store function to set up the TV for the broadcast or cable channels available in your area. If you do not run the auto store function to set up the channels, your television may not operate properly. • After you’ve run Auto store, check out the results. Press P (+) or the P (-) button and see which channels you can select. • Remember, an antenna or cable TV signal must fi rst be connected to...
Page 17
11 Info Install Main ControlManual store54 Prog. no Finetune Store Manual store Auto store Manual store Channel setting Factory reset Language Info Manual store Main Control I Install Manual store42 Start? xxx.xx MHz Prog. no Finetune 50 Store Manual store Info Manual store Main Control I Install Prog. no4 Prog. no Finetune 50 Store Manual store Info Manual store Main Control I Install Finetune4 2 Prog. no Finetune...
Page 18
12 Info Channel setting Main Control l InstallChanneledit42 Skipped Channel Channel swap Name edit Channel sort Channel edit Info Channel setting Main Control l Install Channelswap43 To Exchange From Channel swap Name edit Channel sort Channel edit Info Channel setting Main Control l Install Name edit42 . . . . . . Channel 2 Channel swap Name edit Channel sort Channel edit Info Channel setting Main Control l Install Channel sort4 Channel swap Name edit Channel sort...
Page 19
13 Info Install Main ControlFactory reset52 Yes No Auto store Manual store Channel setting Factory reset Language Select Factory reset in the Settings menu. Press the cursor right to enter Factory reset. Select Yes and press the cursor right for resetting the original factory settings. Factory reset 1 2 3 Note: If you reset the TV to the factory settings, all your present setting on picture, sound, and other feature settings will be erased and replaced by the manufacture’s default settings....
Page 20
14 TV menu-Features Info Main ControlFeatures44 Install NR Auto lock Source list Timer Picture Sound Features Info Features Main Control Timer44 Start time Stop time Sleep timer Clock NR Auto lock Source list Timer Info Features Main Control NR42 Off On NR Auto lock Source list Timer Info Features Main Control Auto lock43 Change code Clear all Lock program NR Auto lock Source list Timer Info Features Main Control Source list47 CVI 1 CVI 2 TV NR Auto lock Source list Timer AV 1 AV 2(side) PC DVI...