Philips 20pfl4112s User Manual

							
5
Quick installation
When you turn on the TV set for the first time,
a menu is displayed on screen. This menu
prompts you to select the country and language
for the menus:
If the menu is not displayed, press the 
MENUkey
to display the menu.
& Use the 
keys on the remote control to
select your country and validate with 
≥.
If your countr y does not appear in the list, select
choice “. . .”
é Next select your language using the 
keys
and validate with 
≥. “
The search starts automatically. All the available
TV programmes and radio stations will be
stored. This operation takes a few minutes. The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press MENU.If no
programme is found, consult the possible solutions p. 14.
‘ If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.
( If this is not the case, you need to use the  Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast their
o wn sort parameters (region, language, etc.). In this
case, indicate your choice using the 
k eys and
v alidate with 
≥.

Installing your television set

Plug’n’Play
Country
Í GB     Æ
Language 
Í  English Æ

Please handle with care and wipe with a soft
cloth to ensure your TV keeps looking new.

 1
 
Positioning the television set

 
Place your TV on a solid stable surface.To avoid 
 danger do not expose the TV to water,or a heat 
 source (e.g. lamp, candle, radiator). Do not  
 obstruct the ventilation grid at the rear.

2
 
Connecting the aerials

 
•
  Insert the radio aerial lead into the FM ANT 

  socket located at the rear of the TV.

 
• 
Insert the aerial plug into the 
: 
socket at the

   rear of the set.
 

 
•
 
Connect the power lead to the television 

  and the mains plug into the wall socket 

  (220-240V/50 Hz).

 
• Ensure the power cord is fully inserted in  
  the TV mains socket and the wall socket.

 
For connecting other appliances see page p.12.

3
 
Switching on

 
To switch on the set,press the 
POWER key. 

 A green indicator comes on and the screen  
 lights up. Go straight to the Quick Installation  
 chapter. If the TV remains in standby mode  
 (red indicator), press the 
P -/+
 key on the 
 remote control.

 
The indicator will flash when you use the   

 remote control.
 
						

							
6
Manual store
Other settings in the Install menu
This menu is used to store the programmes
one at a time.
& Press the 
MENUkey.
é With the cursor, select the  Installmenu then
Manual store :
“ System: select 
Europe(automatic detection*)
or 
W estern Europe(BG standard), Eastern
Europe (DK standard), United Kingdom
(I standard) or  France (LL’ standard). * Except for France (LL’ standard), you must select
choice  France .
‘ Search: press 
≥.The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
r equired programme, this can be entered
directly using the 
0to 9ke ys.
If no picture is found, consult the possible solutions (p. 14).
( Program No.: enter the required number
with the 
≤≥or 0to 9ke ys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the 
≤≥ke ys.
è Store: press 
≥.The program is stored.
! Repeat steps  ‘to è for each programme to
store.
ç To quit the menus, press Ë.
& Press the MENUkey and select the  Install
menu:
é Language: to change the display language for
the menus.
“ Country: to select your country ( GBfor
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your countr y
does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
n umbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes. Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the 
k
eys
and validate with 
≥.T o quit or interrupt the search,
press 
MENU. If no picture is found, consult the
possible solutions (p. 14).
( Name:
If required, you can give a name to the
programmes  and external connectors. Use the
≤≥keys  to  move around the name display area
(5 characters)  and the 
keys to select the
characters. When the name has been entered,
use the 
≤ke y to exit. The name is stored.
Note:on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press 
Ë.

TV Menu
PictureSound
Features
Install
Manual Store System
Search
Program No. Fine Tune Store Í 
Europe   Æ
Program sort
&Press the MENUkey.The  TV Menu is
displayed on the screen. é
With the cursor, select the  Installmenu
f ollowed by the  Sortmenu.
“ Select the programme you want to move using
the 
keys and press ≥.
‘ Then use the 
keys to select the new
n umber and validate with 
≤.
( Repeat steps  “and  ‘for each program you
wish to renumber.
§ To quit the menus, press 
Ë.

TV Menu
PictureSound
Features
Install
Install
Language  Æ
•
Country  Æ
•
Auto Store  Æ
•
Manual Store  Æ
•
Sort  Æ•
Name  Æ
• 0
1
2
3
4
5
 
						

							
7
Picture settings
Sound adjustments
&Press MENUthen ≥.The Picturemenu is
displayed:
é Use the 
keys to select a setting and the
≤≥keys to adjust.
“ Once the adjustments have been made, select
Storeand press ≥to store them. Press Ë
to exit.
Description of the adjustments: • Brightness: this changes picture brilliance.
• Colour:this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
• 
Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
r endering:
Cold(bluer),Normal(balanced) 
or 
Warm(redder).
• Store: to store the picture adjustments and
settings.
& Press MENU,select Sound (>) and press ≥.
The 
Soundmenu is displayed:
é Use the 
keys to select a setting and the
≤≥keys to adjust.
“ Once the adjustments have been made, select
Store and press 
≥to store these changes.
‘ To quit the menus, press 
Ë. Description of the settings:
• Equalizer :to adjust the sound tone (from
bass: 100 Hz to treble: 8000 Hz).
•  Balance: this balances the sound on the left
and right speakers.
•  Delta Volume :this is used to compensate
any volume discrepancies between the
different programs or EXT sockets. This
setting is available for programs 0 to 40 and
the EXT sockets.
•  AV L (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
•  Dolby Virtual :To activate / deactivate the
surround sound effect. You can also access
these settings with key  Q.
• Store: this is used to store the sound settings.
Feature settings
& Press MENU,select Features(>) and
press
≥.Y ou can adjust:
é Contrast +: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black. “
Sleep : to select an automatic standby period.
‘ To quit the menus, press Ë.

TV Menu
Picture
Sound
Features Install
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp. Store
39

TV MenuPicture
Sound
Features Install
Sound
Equalizer  Æ •
Balance  Æ
•
Delta Volume  Æ
•
A VL  Æ
•
Dolby Virtual  Æ
•
Store  Æ
•100 Hz
300 Hz
1000 Hz
3000 Hz
8000 Hz
 
						

							
8
Screen Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format
(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen
(letterbox format). This function allows you to optimise the picture display on screen.
If your television is equipped with a 4:3 screen.
If your television is equipped with a 16:9 screen.
Press the ∏key (or ≤≥) to select the different modes:
This TV set is also equipped with automatic switching which will select the c\
orrect-screen
fo rmat, provided the specific signals are transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed on either side
of the picture.
Zoom 14:9
The picture is enlarged to 14:9 format, a thin black band remains on both sides of
the picture.
Zoom 16:9
The picture is enlarged to 16:9 format. This mode is recommended when displaying
pictures which have black bands at the top and bottom (letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the screen leaving
the sub-titles visible.
Super Wide
This mode is used to display 4:3 pictures using the full surface of the screen by
enlarging the sides of the picture.
Widescreen
This mode restores the correct proportions of images transmitted in 16:9.
Note:
If you display a 4:3 picture in this mode, it will be enlarged horizontally.
Press the 
∏key (or 
) to select the different modes:
4:3
The picture is reproduced in 4:3 format.
Expand 4:3
The picture is enlarged vertically. This mode is used to cancell the black bands when
watching a programme in letterbox format.
Compress 16:9
The picture is compressed vertically into 16:9 format.
 
						

							
9

Teletext
Press :
Y ou will obtain :

Teletext is an information system broadcast by certain channels which can be consulted like a
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar
with the transmission language (cable networks, satellite channels, etc.).
T eletext call
Selecting a pageThis is used to call or exit teletext mode. The summary
appears with a list of items that can be accessed. Each
item has a corresponding 
3 digit page number.
If the channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
b lank (in this case, exit teletext and select another channel).
Enter the number of the page required using the  0to  9
or P -/+ keys. Example: page 120, enter  120.
The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view
another page.
If the counter continues to search, this means that the page is
not transmitted. Select another number.
Direct access to the items Coloured areas are displayed at the bottom of the screen.
The 4 coloured keys are used to access the items or
corresponding pages.
The coloured areas flash when the item or the page is not yet
available.
Contents This returns you to the contents page (usually page 100).
Stop 
sub-page
acquisition
Double page teletext
(depending on version) Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume
sub-page acquisition. The indication 
_a
ppears top left.
To  activate or deactivate the double page teletext display
mode. The active page is displayed on the left and the
f ollowing page is displayed on the right. Press 
Óif you want
to hold a page (i.e. the contents page).The active page is then
displayed on the right.To return to normal mode, press 
Å.
Hidden
information
Enlarge a page
Fa vourite
pages To  display or hide the concealed information (games
solutions).
This allows you to display the top or bottom part of the
page and then return to normal size.
Instead of the standard coloured areas displayed at the bottom of
the screen, you can store 4 favourite pages on the first 
40 channels which can then be accessed using the coloured keys
(red, green, yellow, blue). Once set, these favourite pages will
become the default every time teletext is selected.
&Press the  MENUkey to change to favourite pages mode.éDisplay the teletext page that you want to store.“Press the coloured key of your choice for 3 seconds. The
page is now stored.
‘Repeat the operation with the other coloured keys.(Now when you consult teletext, your favourite pages will
appear in colour at the bottom of the screen. To
temporarily retrieve the standard items, press  MENU.
To  clear ever ything, and return the standard items as the
default, press 
Ëf or 5 seconds.
 
						

							
10
Using the radio 
Choosing radio mode
&Press the 
AVkey on the remote control to
display the 
Source List.
é Use the cursor   key to select 
FM Radio
and then press the cursor  ≥ key to switch the
TV to radio mode.
To  return to TV mode, press the AV key, select
TV and validate with  ≥key.
In radio mode the number and name of the
station (if available), its frequency and the sound
mode are indicated on the screen.
Selecting programmes Use the 
0/9or P -/+keys to select the FM
stations (from 1 to 40).
List of radio stations
Press the  ıkey to display / hide the list of
radio stations.Then use the cursor to select a
station.
Using the radio menus Use the 
MENUkey to access the specific radio
settings.
Searching radio stations If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the 
Installmenu :Auto Store
(for a complete search) or Manual Store(for
a station by station search). These menus work
in exactly the same way as the TV menus.
Screen saver In the 
Featuresmenu you can activate / close
the screen saver. The time, the frequency of
the station and its name (if available) move
across the screen.
Using in PC monitor mode
PC Mode Your TV can be used as a computer monitor.
Y ou must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the 
AVkey on the remote control to
display the 
Source List.
é Use the cursor   key to select 
PCand
then press the cursor  ≥ key to switch the TV
to PC mode (
DVI-I In).
To  return to TV mode, press the 
AVkey,select
TVand validate with  ≥ key.
Using the PC menus Press the 
MENUkey to access the specific
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved): • Picture:
- 
Brightness / Contrast:to adjust the
brightness and contrast.
- 
Horizontal / Vertical: to adjust the horizontal
and vertical placing of the image.
- 
Colour Temp: to adjust the colours (cold,
normal or warm).
• Audio  Selection: to choose the sound
r eproduced on the TV (PC/HD, TV or Radio).
• Features (only available on certain versions) :
- 
Phase/Clock: eliminates the horizontal
(
Phase) and vertical (Clock) interfering lines.
- 
Format: to choose between full screen or
native format of the PC screens.
- 
Auto Adjust: position is set automatically.
• Reset To Factory Setting: to return to the
factory settings (default settings).
NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be obser ved when it is operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
 
						

							
11
Using in HD (High Definition) Mode
HD ModeThe HD (High Definition) mode allows you to
enjoy clearer and sharper pictures through the
DVI-I inputs if you are using a HD 
r eceiver/ equipment that can transmit high
definition programming.
Y ou must first of all connect the HD equipment
(see p.13).
Choosing HD mode
& Press the 
AVkey on the remote control to
display the 
Source List.
é Use the cursor   key to select 
HDand
then press the cursor  ≥key to switch the TV
to HD mode.
To  return to TV mode, press the 
AVkey,select
TVand validate with  ≥ key.
Using the HD menus Press the 
MENUkey to access the specific
settings of the HD mode. Use the cursor to
adjust them (the settings are automatically
saved):
Picture:
• Brightness: this changes picture brilliance.
• Colour:this changes the intensity of the
colour.
• Contrast: this changes the difference
between the light and dark tones.
• 
Sharpness (only available for certain signal
only)
: this changes the picture definition.
• Colour Temp.: this changes the colour
r endering:
Cold(bluer),Normal(balanced) 
or 
Warm(redder).
• Store: to store the picture adjustments and
settings.
Sound:
•  Equalizer :to adjust the sound tone (from
bass: 100 Hz to treble: 8000 Hz).
•  Balance: this balances the sound on the left
and right speakers.
•  Delta Volume :this is used to compensate
any volume discrepancies between the
different programs or EXT sockets. This
setting is available for programs 0 to 40 and
the EXT sockets.
•  AV L (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
•  Dolby Virtual :To activate / deactivate the
surround sound effect. You can also access
these settings with key  Q.
• Store: this is used to store the sound
settings.
F eatures:
•  Sleep : to select an automatic standby
period.
•  Horizontal : to adjust the horizontal placing
of the image.
(Only available on certain versions)
Here is the list of the different HD display resolutions available on your TV:

SDTV 480 i
SDTV 576 i
EDTV 480 p
EDTV 576p
HDTV 720p
HDTV 1080 i
X
X
X
X
X
X
X
X
X
X
 
Analogue     Digital
X
X
X
X
X X
X
 
Analogue     Digital
X
X
X
X
X
X X
X
X
X
 
Analogue     Digital
X
X
X
X
X
X X
X
X
X
 
Analogue     Digital
15/39cm
XGA 20/51cm
VGA 20/51cm
WXGA 23/58cm
WXGA
 
						

							
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
Other equipment

DVI-I In
EXT 1
FM ANT
12
Connecting peripheral equipment
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorders test signal and assign it programme
number 0 (refer to manual store, p. 6).
To  reproduce the video recorder picture, press 
0key.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
The television has 1 external socket situated at the back of the set (EXT1) and sockets on the side.
Press the 
AV ke
y on the remote control to display Source Listand select TVor peripheral
equipment connected to 
EXT1, AV/SVHS, PC, HD or Radio.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
Video recorder
DVI-I In
EXT 1
FM ANT
DVI-I In
DVI Audio In
EXT 1
FM ANT
Headphone
Audio In
Video In
S-Video
 
						

							
13
Make the connections as shown opposite.
With the 
AVke
y,select AV/S-VHS.
For a mono set, connect the sound signal to the AUDIO L (or AUDIO R)
input. The sound automatically comes out of the left and right speakers
of the set.
Headphones
When headphones are connected, the sound on the TV set will be
cut.The 
VOLUME -/+ke ys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Make the connections as shown opposite.
With the 
AVke y,select HD.
For more information on using HD mode see page 11.
Side connections
HD equipment
Computer
PC with DVI
Connect the monitor output (DVI) of your computer to the
D VI-I In of the LCD TV. Connect the sound output Audio out of
the computer to the input DVI Audio in of the LCD TV.
PC with VGA
Connect the monitor output (VGA) of your computer via a
V GA/DVI-I cable* to the DVI-I In of the TV. Connect the sound
output Audio out of the computer to the input DVI Audio in of
the LCD TV.
* Not supplied with the set.
For more information on using PC mode see page 10.
Configure the computer for optimum resolution on :
20PF4112S : 640 x 480, 75 Hz
HD Analogue Connection (DVI-I)
HD Digital Connection (DVI-I)
DVI-I In
EXT 1
FM ANT
DVI-I In
EXT 1
FM ANT
DVI-I InEXT 1
FM ANT
DVI-I InEXT 1
FM ANT
 
						

							
14
Glossary
DV I  (Digital Visual Interface): A digital interface
standard created by the Digital Display
W orking Group (DDWG) to convert analog
signals into digital signals to accommodate
both analog and digital monitors.
HDCP  (High-bandwidth Digital-Content
Protection): developed by Intel to provide
secure copy protection of content transmitted
digitally from the source (such as DVD player
or set-top box) to the TV display.
RGB signals : These are the three video signals,
Red Green Blue, which make up the picture.
Using these signals improves picture quality.
S-VHS Signals: These are 2 separate Y/C video
signals from the S-VHS and Hi-8 recording
standards. The luminance signals Y (black and
white) and chrominance signals C (colour) are
r ecorded separately on the tape. This provides
better picture quality than with standard video
(VHS and 8 mm) where the Y/C signals are combined to provide only one video signal.
NICAM sound: Process by which digital sound
can be transmitted.
System: Television pictures are not broadcast in
the same way in all countries.There are
different standards: BG, DK, I, and L L’.The
Systemsetting (p. 6) is used to select these
different standards.This is not to be confused
with PAL or SECAM colour coding. Pal is used
in most countries in Europe, Secam in France,
Russia and most African countries.The United
States and Japan use a different system called
NTSC.The inputs EXT1 and EXT2 are used to
r ead NTSC coded recordings.
16:9: Refers to the ration between the length and
height of the screen. Wide screen televisions
have a ration of 16/9, conventional screen TV
sets have a ration of 4/3.
Tips
P oor reception
No picture
No sound
Snowy picture
when switched to
HD-D mode
PC mode doesn’t
w ork ?
Remote control
Standby
Cleaning the set
Still no results?
The proximity of mountains or high buildings may be responsible for ghost
pictures, echoing or shadows. In this case, try manually adjusting your picture: see
Fine Tune (p. 6) or modify the orientation of the outside aerial. If you are using an
indoor aerial, reception may be difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception remains poor, you will need to
use an external aerial
Have you connected the aerial socket properly? Have you chosen the right
system? (p. 6). Poorly connected euroconnector cables or aerial sockets are often
the cause of picture or sound problems (sometimes the connectors can become
half disconnected if the TV set is moved or turned). Check all connections.
If on certain channels you receive a picture but no sound, this means that you do not have
the correct TV system. Modify the 
Systemsetting (p. 6).
The amplifier connected to the TV does not deliver any sound? Check that you
have not confused the audio output with the audio input.
Noise is displayed if the connected digital equipment’s (DVD player or set-top
box) HDCP authentication failed. Check the user manual for the digital
equipment you are connecting.
Check that you have configured the computer on a compatible display resolution
(see p. 13).
The TV set does not react to the remote control; the indicator on the set no
longer flashes when you use the remote control? Replace the battery.
If the set receives no signal for 15 mins, it automatically goes into standby mode.
To  save power, your set is fitted with components that give it a very low power
consumption when in standby mode (less than 1 W).
Only use a clean, soft and lint-free cloth to clean the screen and the casing of your
set. Do not use alcohol-based or solvent-based products.
Disconnect the mains plug of the TV for 30 seconds then reconnect it.
If your TV set breaks down, never attempt to repair it yourself: contact your
dealers after-sales service.