Philips 200ws8f User Manual

   
       
 
 
• Safety and 
Troubleshooting
 • FAQs
 • Common Problems
 • Imaging Problems 
 
• Regulatory  Information
 • Other Related Information
  
  
  
  
Troubleshooting
This page deals with problems that can be corrected by the user. If the \
problem still persists 
after you have tried these solutions, contact your nearest Philips deale\
r.
Common Problems 
Having this problem Check these items
No Picture
(Power LED not lit) 
l     Make sure the power cord is plugged 
into the power outlet...

 
Imaging Problems
Display position is incorrect
l     Press the Auto button. 
l     Adjust the image position using the 
Horizontal Position and/or Vertical 
Position in OSD Main Controls.
 
Image vibrates on the screen
l     Check that the signal cable is 
properly connected to the graphics 
board or PC.
 
Vertical flicker appears
 
 
l     Press the Auto button. 
l     Eliminate the vertical bars using the 
Phase/Clock of More Settings in OSD 
Main Controls.
 
Horizontal flicker appears
 
 
l...

Green, red, blue, dark, and white dots 
remains
l     The remaining dots are normal 
characteristic of the liquid crystal 
used in today’s technology.
 
For further assistance, refer to the Consumer Information Centers list and contact your 
local Philips distributor.
 
RETURN TO TOP OF THE PAGE
 
      
 

   
       
 
 
•
CE Declaration 
of Conformity
 •Energy Star 
Declaration
 
•Federal 
Communications 
Commission 
(FCC) Notice (U.
S. Only)
 •FCC Declaration of Conformity
 
•Commission Federale de la 
Communication 
(FCC 
Declaration)
 
•EN 55022 Compliance 
(Czech Republic 
Only)
 
•VCCI Class 2 Notice (Japan 
Only)
 
•MIC Notice (South Korea 
Only)
 
•Polish Center for Testing and 
Certification 
Notice
 
•North Europe (Nordic 
Countries) 
Information
 •BSMI Notice (Taiwan Only)
 
•Ergonomie Hinweis...

 
•Frequently Asked 
Questions 
(FAQs)
As an ENERGY STAR® Partner, PHILIPS has determined that this 
product meets the 
ENERGY STAR® guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for a long\
 time.
RETURN TO TOP OF THE PAGE
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a\
 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limi\
ts are 
designed to...

Declaration of Conformity for Products Marked with FCC Logo, United Stat\
es Only
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two 
conditions: (1) this device may not cause harmful interference, and (\
2) this device must 
accept any interference received, including interference that may cause \
undesired operation.RETURN TO TOP OF THE PAGE
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimi\
tes...

RETURN TO TOP OF THE PAGE
VCCI Notice (Japan Only)
This is a Class B product based on the standard of the Voluntary Control\
 Council for 
Interference (VCCI) for Information technology equipment. If this equi\
pment is used near a 
radio or television receiver in a domestic environment, it may cause rad\
io Interference. Install 
and use the equipment according to the instruction manual.
Class B ITE 
 
RETURN TO TOP OF THE PAGE 
MIC Notice (South Korea Only)
Class B Device
Please note that this device...

 
To completely switch off the equipment, the power supply cable must be r\
emoved from the 
power supply socket, which should be located near the equipment and easi\
ly accessible.
A protection mark B confirms that the equipment is in compliance with \
the protection usage 
requirements of standards PN-93/T-42107 and PN-89/E-06251.
RETURN TO TOP OF THE PAGE
North Europe (Nordic Countries) InformationPlacering/Ventilation 
VARNING: 
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIG\
A, 
NÄR DU...

Paikka/Ilmankierto 
VAROITUS: 
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA 
HELPOSTI IRROTTAA PISTORASIASTA. 
 
Plassering/Ventilasjon 
ADVARSEL: 
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR \
STØMTILFØRSEL ER LETTE Å NÅ. 
RETURN TO TOP OF THE PAGE
BSMI Notice (Taiwan Only)
 
RETURN TO TOP OF THE PAGE
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der Verordnung ü\
ber den Schutz vor 
Schäden durch Röntgenstrahlen festgelegten...

RETURN TO TOP OF THE PAGE
End-of-Life Disposal 
Your new monitor contains materials that can be recycled and reused. Spe\
cialized companies 
can recycle your product to increase the amount of reusable materials an\
d to minimize the 
amount to be disposed of. 
Please find out about the local regulations on how to dispose of your ol\
d monitor from your 
local Philips dealer. 
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance t\
o local-state and...