Philips 200bw8e User Manual

click on factory reset to reset the parameters of the monitor. Such choi\
ces are disabled 
when using DVI-D (digit) input.
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage 
monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor 
performances and settings by a software interface, instead of the hardwa\
re buttons at the 
front bezel of the monitors....

•Front View 
Produt
Description
•
Connecting
to Your PC
•Getting
Started
•Optimizing
Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitor’s power on and off
2MENUTo access OSD menu
3Hot key of Contrast adjustment and To adjust OSD value up 
when OSD menu is active
4Hot key of Brightness adjustment and To adjust OSD value 
down when OSD menu is active 
5Automatically adjust the horizontal position, vertical position, 
phase and clock settings
RETURN TO TOP OF THE...

RETURN TO TOP OF THE PAGE 
Optimizing Performance 
For best performance, ensure that your display settings are set at 1680x\
1050, 60Hz. 
Note: To check the current display resolution, press the OK button once. 
The current display mode is shown on the OSD. If the display setting is \
not 
optimized, a warning string USE 1680x1050 FOR BEST RESULT appears in 
the OSD menu.
You can also install the  Flat Panel Adjust (FP Adjustment) program , a program for getting the best  
performance out of your...

• Front View  
Product 
Description 
• Accessory  
Pack 
• Connecting  
to Your PC 
• Getting  
Started 
• Optimizing  
Performance 
Connecting to Your PC 
Accessory Pack 
Unpack all the parts. 
Power cord VGA cable EDFU CD 
DVI cable (Optional) 
RETURN TO TOP OF THE PAGE 
Connecting to Your PC 
1) 
Audio cable 
200BW
 

2) 
3) Cable management 
4)Connect to PC 
W B 0 0 2
4 
1 3 2 5 
1 
 

(1)AC power input
(2) DVI-D input
(3) VGA input
(4) Kensington anti-thief lock
(6) Set your Monitor at 1680x1050@60Hz for best performance. It is also 
strongly recommended to use DVI input (may require the optional DVI cable) 
for the true digital enjoyment.
RETURN TO TOP OF THE PAGE
(5)PC Audio input
 

Your LCD 
Monitor :
•Front View 
Product
Description
• Setting Up 
and
Connecting
Your
Monitor
• Getting 
Started
• Optimizing 
Performance
Getting Started 
Getting Started
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vista or later
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
 requirements 
for Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) should be installed in 
orderthat your Philips monitor can be enabled from the Monitor dialog box i\...

7.Select 'Display a list of the known drivers for this device so that I can choose a 
specific driver', then click on 'Next' and then click on 'Have disk...'. 
8.Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM 
Drive).
9.Click on the 'Open' button, then click on the 'OK' button. 
10.Select your monitor model and click on the 'Next' button. 
11.Click on the 'Finish' button then the 'Close' button. 
If...

For Windows® Vista
1.Start Windows® Vista
2.Click the Start button; select and click on Control Panel.
3.Select and click on Hardware and Sound
4.Choose Device Manager and Click on Update device drivers.
5.Select Monitor and then right click on Generic PnP Monitor.
6.Click on Update Driver Software.
7.Select Browse my computer for driver software. 
8.Click the Browsebutton and choose the drive in which youve placed the\
 disk.
Example: (CD-ROM Drive:\\Lcd\PC\drivers\). 
9.Click the Next button.
10.Wait...