Philips 19pfl3404d User Manual

							19
Change the time zone
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Clock] > [Time zone].
3 Press  to select your time zone.
4 Press OK to confirm.
Note
This option is only available if you select   •[Auto 
clock] > [Manual] (In countries with clock 
transmission data).
Use daylight saving
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Clock] > [Daylight 
saving].
3 Press OK or  to enter [Daylight saving].
4 Press  to select [Standard time] or 
[Daylight saving time].
5 Press OK to enable your selection.
Note
This option is only available if you select   •[Auto 
clock] > [Manual].
View photos and play music 
from a USB storage device
Caution
Philips is not responsible if the USB storage   •
device is not suppor ted nor is it responsible 
for damage or loss of data from the device.
Your TV is fitted with a USB connector that 
enables you to view photos or listen to music 
stored on a USB storage device.
3 Press OK or  to enter the list of 
available languages.
4 Press  to select a subtitle language.
5 Press OK to enable your selection.
Tip
You can also access   •[Subtitle language] menu 
while watching T V by pressing 
 OPTIONS > 
[Subtitle language].
Use the TV clock
You can display a clock on the TV screen. The 
clock displays the current time using time data 
received from your TV ser vice operator.
Display the TV clock
1  When watching T V, press  OPTIONS.
The TV option menu appears.   »
2 Select [Clock].
3 Press OK.
Note
To disable the clock , repeat the above   •
procedure.
Change the clock mode
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Clock] > [Auto clock].
3 Press OK or  to enter the [Auto clock] 
menu.
4 Press  to select [Automatic] or 
[Manual].
5 Press OK to confirm.
English
EN
Downloaded From T,-Manual.com Manuals 
						

							20
2 Press:
• OK to pause the slide show.
The   »
 icon appears.
Press  • 
 to go back or move 
for ward to the nex t image.
• 
 BACK to stop the slide show. 
Change slide show settings
1  When viewing a slide show, press  
OPTIONS.
The slide show options menu appears.   »
2 Press  to select one of the following.
• [Start/Stop slide.]Star ts or stops a 
slide show.
• [Slideshow trans.]Sets the transition 
from one picture to the nex t.
• [Slideshow freq.]Sets the amount of 
time that a picture is shown.
• [Rotate image]Rotates a picture.
• [Show info]Displays the picture 
name, date, size and nex t picture in 
the slide show.
3 Press OK to confirm your setting.
Note
  •[Rotate image] and [Show info] appear only 
when you press OK or 
 to pause the 
slideshow.
Listen to music
1  In the USB thumbnail browser view, 
select [Music] and press 
 to enter.
2 Press  GUIDE to switch between 
thumbnail and file browsing views.
3 Press  to select music or a music 
album.
4 Press OK to play the selected music.
1  Turn on the T V.
2  Connect the USB device to the USB por t 
on the side of your T V.
The home menu appears.   »
  
3 Press  to select [Browse USB].
4 Press OK to confirm.
The USB thumbnail browser appears.   »
Tip
Press   • GUIDE to switch between thumbnail 
and file browsing views.
View photos
1  In the USB thumbnail browser, select 
[Picture] and press 
 to enter.
2 Press  GUIDE to switch between 
thumbnail and file browsing views.
3 Press  to select a photo or a photo 
album.
4 Press OK to view the selected photo in 
full screen mode.
Tip
When in full screen mode, press   • to move 
between photos. 
View a slide show of your photos
1  When a full screen image of a photo is 
displayed, press OK.
A slide show begins from the selected    »
image.
Add new device
Watch TVBrowse USB
Setup
EN
Downloaded From T,-Manual.com Manuals 
						

							21
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  MENU. 
2 Press  to select [Setup] > 
[Software update] > [Current software].
The TV displays the current software    »
information.
Update software (digital broadcasts)
You can update the T V sof tware via a USB 
device or OAD.
Update using a USB device
Connect your USB device to the USB por t at 
the side of your T V.
1  If the sof tware update screen does not 
appear automatically, select [Setup] > 
[Software update] > [Local updates] 
> [USB] to update the T V sof tware 
manually.
2  Follow the on-screen instructions to 
complete the update.
Note
The T V restar ts af ter the sof tware update is   •
complete.
Update using OAD (On the Air 
software Download)
1  If using (DVB -T ) digital broadcast, your 
T V automatically receives sof tware 
updates. If you receive a message on 
your screen asking you to update your 
software:
Music settings
When listening to music, press  OPTIONS 
to access one of the following music settings.
• [Start/Stop play]
• [Repeat/Play once]
• [Shuffle on/off ]
• [Show info]
• [TV speakers]
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your   •
USB storage device.
1 Press  BACK to exit the USB browser.
2  Wait for five seconds before you 
disconnect the USB storage device.
Listen to digital radio 
channels
If digital broadcasting is available, digital radio 
channels are installed automatically during 
installation.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
3 Press  to select [Filter channels] > 
[Radio].
The radio channel grid appears.   »
4 Press  to select a radio channel and 
press OK to listen.
Note
Select   •[Filter channels] > [All] to exit radio 
channels and view all channels.
English
EN
Downloaded From T,-Manual.com Manuals 
						

							22
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1 (SCART). 
Set decoder channel
Map channels from a decoder or descrambler
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[Decoder].
3 Press OK or  to enter [Decoder] menu 
.
4 Press  to select [Channel] and press 
OK or 
 to enter.
A list of analogue channels appears on    »
the screen.
5 Press  to select one channel to map 
to the decoder/descrambler channel and 
press OK to confirm.
6 Select [Status] and press OK or  to 
enter.
7 Press  to select [EXT 1] (SCART ) 
the connector used by the decoder/
descrambler.
8 Press OK.
9 Press  MENU to exit.
Start a TV demo
1 Press DEMO on the remote control.
2 Press  to select a demo and press OK 
to view it.
3 Press DEMO to exit.
Select  • [Update now] to update the 
software immediately.
Select  • [Remind me later] to exit the 
update screen at that time and be 
reminded later.
Select  • [Cancel] to skip the update.
2  If you select [Cancel], you can manually 
access the OAD update by selecting 
[Setup] > [Software update] > [Local 
updates] > [OAD].
3  Select the available version of OAD and 
press OK.
4  Follow the on-screen instructions to star t 
the update.
Note
The T V restar ts af ter the sof tware update is   •
complete.
Change TV  preferences
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences].
3 Press OK or  to enter [Preferences].
• [Location]Optimises TV settings for 
your location - home or shop.
• [Volume bar]Displays the volume 
bar when adjusting the volume.
• [Channel info.]Displays information 
about the T V channel ever y time you 
switch channels. Select [Full] to view 
channel information or [Of f ] to turn 
off the channel information.
• [EasyLink]Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
• [E-sticker]For shop mode only. Sets 
the location of the e-sticker.
EN
Downloaded From T,-Manual.com Manuals 
						

							23
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Factory settings].
3 Press OK or  to enter the [Factory 
settings] menu.
A factor y setting message appears.   »
4 Select [Reset] to star t resetting.
5 Press  MENU to exit.
English
EN
Downloaded From T,-Manual.com Manuals 
						

							24
  
3 Press OK or  to enter the menu.
The countr y menu appears.   »
  
4 Press  to select your countr y.
5 Press OK to confirm your choice.
The channel installation guide appears    »
on the screen.
Step 3 Install channels
Install the available analogue and digital 
T V channels and digital radio channels 
automatically.
1  From the channel installation guide 
screen (see ‘Step 2 Select your countr y’ 
on page 24), select [Full installation] to 
automatically install all T V channels and 
digital radio channels.
  
2 Press OK to confirm.
The TV star ts to search and store all    »
the available channels. 
Language
Channel install.
Preferences
Decoder
Clock
Factory settingsMenu language
Channel assistant
Location
Channel
Auto clock
ActionPicture
Sound
Features
Installation
Software update
Select your country, 
then press OKSlovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
Ukraine
UK
Start automatic installation.
This takes a few minutes.
Full installation
Skip installation
6 Install channels
The first time you set up your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store 
channels automatically.
Step 1 Select your menu language
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Language] > [Menu 
language].
3 Press OK or  to enter [Menu language].
  
4 Press  to select a language setting.
5 Press OK to confirm.
6 Press  to return to [Installation] menu.
Step 2 Select your country
Select your countr y for proper channel 
installation. 
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Channel assistant].
ClMenu languageockPrimary subtitle in
Picture
Sound
Features
Installation
Software update
Decoder
Language
Channel install.
Preferences
Decoder
Clock
Factory settingsMenu language
Primary audio language
Secondary audio language
- - - -
- - - -
- - - -
- - - -
Hearing impairedMenu language
English
EN
Downloaded From T,-Manual.com Manuals 
						

							25
  
3 Press OK or  to enter [System] menu.
4 Press  to select your countr y or 
region.
5 Press OK to confirm.
6 Press  to return to [Channel install.] 
menu.
Step 2 Search and store new TV 
channels
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Search] and then OK 
or 
 to enter [Search].
4 Press  to manually enter the three-
digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency, press OK to search 
for the next available channel.
6 Press  BACK when the new channel is 
found.
7 Press  to select [Store new channel] 
to store the new channel under a new 
channel number.
8 Press OK or  to enter [Store new 
channel] and press OK.
9 Press  to return to the [Analogue: 
Manual] menu.
Sound
FeaturesPreferences Start up message
Digital Test recept...
Picture
Sound
Features
Installation
Software update
Decoder
Language
Channel install.
Preferences
Decoder
Clock
Factory settingsChannel assistant
Standby update
Analogue: Manual
Analogue: ManualSystem 
3  When installation is complete, press OK 
to return to [Installation] menu.
Step 4 Update the channel list
You can choose to enable auto update of 
channels, if your T V is in standby mode. If you 
enable this feature, the channels stored in your 
T V will be updated ever y morning according 
to the channel information in the broadcast.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Standby update].
3 Select [On] to enable the automatic 
update or select [Of f ] to disable it.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system set tings are   •
correct.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
System searching. Please wait.
Stop
Digital channels found
Analogue channels found7
0
English
EN
Downloaded From T,-Manual.com Manuals 
						

							26
Reorder channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid .
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Reorder] and then 
OK to return to the channel grid.
4 Press  to select the channel you 
want to reorder and press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to your preferred position.
6 Press  OPTIONS.
  »[Done reordering] appears on the 
screen.
7 Press OK to finish reordering.
Test digital reception
If using digital broadcasts, you can check the 
quality and signal strength of digital channels. 
This allows you to reposition and test your 
antenna or satellite dish.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Digital: test recept].
3 Press OK or  to enter the menu.
4 Press  to enter the frequency of 
the channel you want to test.
5 Press OK to confirm the frequency and 
then press OK again to confirm [Search].
6  When complete, select [Store] to store 
the frequency.
Note
If the signal quality and streng th is poor,   •
reposition the antenna or satellite dish and 
retest.
If you still have problems with the reception 
  •
of your digital broadcast, contact a specialised 
installer.
Step 3 Fine-tune analogue channels
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Fine-tune] and then 
OK or 
 to enter [Fine-tune].
4 Press  to adjust frequency.
5 Press OK when done.
6 Press  to select [Store current 
channel] to store the fine-tuned channel 
under the current channel number.
7 Press OK or  to enter [Store curr. 
chan.] and press OK.
8 Press  to return to the [Channel install.] 
menu.
Rename channels
Channels can be renamed so that a name of 
your choice appears whenever the channel is 
selected.
1  When watching T V, press OK to display 
the channel grid .
2 Press  to select the channel you 
want to rename.
3 Press  OPTIONS.
The channel options menu appears.   »
4 Press  to select [Rename channel].
A text input box appears.   »
5 Press  to select and change 
characters.
6 Select [Done] to finish renaming 
channels.
Tip
Use   •[Aa] to change upper-case letter to lower-
case let ter and vice versa.
EN
Downloaded From T,-Manual.com Manuals 
						

							27
a  PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
 
b  EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
VGA
VGA
PC IN(AUDIO)
 
7 Connect devices
This section describes how to connect 
various devices with different connectors and 
supplements examples provided in the Quick 
Star t.
Note
Different types of connectors may be used to   •
connect a device to your TV, depending on 
availability and your needs.
Back connector for 19-22 
inch TV
 
7 8
English
EN
Downloaded From T,-Manual.com Manuals 
						

							28
 
f SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
  
g HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 31).
h SERV. U
For sof tware update.
AUDIOIN
SPDIF OUT
c  EXT 1 (CVBS and RGB)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
d TV ANTENNA
Signal input from an antenna, cable or 
satellite.
 
e  AV OUT (VIDEO OUT and AUDIO 
OUT L/R)
Audio and video output to analogue 
devices such as another T V or a recording 
device.
TV ANTENNA
EN
Downloaded From T,-Manual.com Manuals