Philips 19pfl3404 User Manual

19
Step 2 Search and store new TV 
channels
1 Press  MENU.
2 Select [Installation] > [Channel install.] 
> [Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select and enter [Search].
4 Press  or use Numeric buttons to 
manually enter the three digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency. press OK to search 
for the next available channel.
6 Press  BACK when the new channel is 
found.
7 Press  to select [Store new channel]...

20
Tip
Rename channels - the leng th of the name is   •limited to six characters.
Use   •[Aa] to change upper-case letter to lower-
case let ter and vice versa.
Rearrange channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid .
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select and enter 
[Reorder].
4  Select the channel you want to reorder 
and press OK.
5 Press  to select the new...

21
e  EXT 1 (RGB and CVBS)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
f  EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
g HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
Back connector for TV 26 
inch and larger
  
a SERV. C
For sof tware update.
b AUDIO IN
Audio input from devices that require 
a separate...

22
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •additional audio cable.
• HDMI cable
 
• DVI - HDMI cable
  
DVI
LEFT / RIGHT
HDMI 1 / DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger For TV of size 19-22 inch
e  EXT 1 (RGB and CVBS)/EXT 2 (CVBS)
Analogue audio...

23
1 Press MENU.
2 Select [Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
Use one-touch standby
1  Press and hold Standby on the T V ’s or 
device’s remote control for at least three 
seconds. 
The TV and all connected HDMI    »
devices switch to standby.
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent...

24
Remote control
Ty p e :  P F 0 1E 0 9 B • 
Batteries: 2 x A A A (LR03 type) • 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: < 0.3W • 
Ambient temperature: 5 to 40 degrees  • 
Celsius
Supported TV  mounts
To mount the TV, purchase a Philips TV mount 
or a VESA-compatible TV mount. To prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 2.2 inches or 5.5cm 
from the back of the TV.
Warning
Follow all instructions provided with the T V   •mount. Koninklijke Philips...

25
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •...

26
Computer connection issues
The computer display on the TV is not stable:
Check that a suppor ted resolution and    •
refresh rate is selected on the computer.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to 
the FAQs for this product at w w w.philips.
com/suppor t. 
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in the Addendum.
Warning
Do not at tempt to repair the product yourself.   •This may cause...

27
one-touch standby  23
environmental care  5
F
factory settings  17
favourite list 
select 13
set up  13
H
HDMI cable 
troubleshooting 26
I
install channels 
automatic 18
manual 19
K
Kensington lock 23
L
location 16
lock 
Kensington 23
M
menu 
main menu   10
teletex t 13
O
One-touch play 23
One-touch standby 23
P
picture format 
picture format change  11
troubleshooting 25
Picture settings 10
10 Index
B
batteries 24
bracket 24
C
Channel list 
favourite 13
troubleshooting 25
update 14
channels...

28
R
reception 25
remote control 
over view  6
technical specifications  24
S
sleep timer  14
Smart settings 10, 12
sound settings 12 , 12
T
Table of Pages 13
technical specifcations 24
Te l e t e x t 
features 13
subpages 13
table of pages  13
timer 
on timer   15
sleeptimer 14
standby 14
troubleshooting 25
TV 
adjust volume  9
menu  10
screen care  5
standby 8
switch channels  8
switch off  8
switch on  8
troubleshooting 25
tuner technical specifications  24
wall mount  24
TV lock 
lock channels  16
lock...