Philips 191v2sb User Manual

							9
 Star t with Standa rd pane:
Adjust men u:
•  Adjust Men u allow you  to adjust  Brightness,   
  Contr ast, Focus,  Position  and Resolution.  
•  You can f ollow the instr uction and do the  
  adjustment.  
•  Cancel prompts  user if you want to cancel  
  installation.  
 
						

							10
Color menu: 
•  Color Men u allow you  to adjust  RGB,  
  Black Lev el, White P oint, Color Calib ration,   
  and Smar tImage Lite (Please ref er to  
  Smar tImage  Lite section).  
•  You can f ollow the instr uction and do the  
  adjustment.  
•  Refer to belo w tab le for sub-men u item base  
  on y our input.  
•  Example f or Color Calibration
1. Sho w Me star ts color calibr ation tutor ial. 
2.  Star t - star ts th e 6-step color calibr ation  
  sequence . 
3.  Quick  View loads the bef ore/after images.  
4.  To retur n to Color  home pane , click the  
  Cancel b utton. 
5.  Enab le color calibr ation - by default is 
  on. If uncheck ed, does not allo w for color  
  calibr ation to happen,  dimes out  start and  
  quick view b uttons. 
6.  Must ha ve  pat ent  inf o in calibr ation screen.
 
						

							11
• Displa ys cur rent  preference settings.  
•  A check ed bo x enab les the f eature .  The  
  check bo x is a toggl e. 
•  Enab le Contex t Menu on desktop  is check ed  
 First color Calibration Sc
reen:  
•  Previous b utton is disa bled until the second  
  color screen.  
•  Next goes to the  succeeding target  
  (6-tar gets). 
•  Final next goes File>Presets pane . 
•  Cancel closes the UI and retur ns to the  plug  
  in pag e.
Smar tImage Lite 
Allo ws user to change setting f or better display 
setting based on content.
When Enter tainment is set, Smar tContr ast and 
Smar tResponse  are enabled.
Options>Pr efer ences  - Will onl y be acti ve 
when selecting Pref erences from the drop-d own 
Options men u. On a non-suppor ted displa y 
capa ble of DDC/CI,  only the Help and Options 
tabs are a vailable .
  (On) b y default.  Enable Context  menu  
  displa ys Smar tControl  Lite selections   
  for Select Pres et and Tune Displa y in the  
  desktop r ight-click context men u. Disab led  
  remo ves  Smar tControl  Lite from the  
  right  click context  menu. 
•  Enab le T ask  Tra y icon is check ed (On) b y  
  default.  Enable context men u shows the task  
  tray  men u for Smar tControl  Lite .  A r ight   
  click on the tas k tray icon displa ys the menu  
  options  for Help ,  T echnical Suppor t. Check  
  for Upgr ade,  About,  and Exit.  When Enab le  
  task tray men u is disab led, the task tr ay icon  
  will onl y displa y EXIT . 
•  Run at Star tup is check ed (On) b y default.   
  When disab led, Smar tControl  Lite will  
  not launch at s tart or be in the task  tray.  The  
  only wa y to lau nch Smar tControl Lite is  
  either  fro
m  t h e d esktop  sho rt c u t o r fro m t h e  
  progr am file .  An y preset set to r un at star tup  
  will not load w hen this box is uncheck ed  
  (Disab led). 
•  Enab le tr ansparency  mode  (Win dows  7,  
  Vista,  XP). Default is 0% Opaque .
 
						

							12
• Displa y the Source instr uction pane and  
  current  input source setting.  
•  On single input dis plays, this pane  will not be  
  visib le.
Options>Input - 
Will only be activ e when 
selecting Input from the drop-d own Options 
men u. On a non-suppor ted displa y capa ble of 
DDC/CI,  only the Help and Options tabs are 
a vaila ble .  All other Smar tControl Lite tabs are not 
a vaila ble .
Options>Audio -  Will only be activ e when 
selecting  Volume from the drop-do wn Options 
men u.
On a non-suppor ted displa y capa ble of DDC/CI,  
onl y the Help and Options tabs are a vailable. 
Help>User Man ual - Will onl y be activ e when 
selecting User Man ual from the drop-do wn Help 
men u. On a non-suppor ted displa y capa ble of 
DDC/CI,  only the Help and Options tabs are 
a vailab le.
 
						

							13
Help>Version -  Will only be acti ve when selecting 
V er sion  from the drop- do wn Help men u. On a 
non-suppor ted displa y capa ble of DDC/CI,  only 
the Help and Options tabs are a vailable .Context Sensitiv e menu
The Context Sensitiv e men u is Enab led by default.  
If Enab le Context Men u has been check ed in the 
Options>Pref erences pane, then the men u will be 
visib le.
The Context Men u has four entr ies:
•  Smar tControl  Lite -  When selected the  
  About Screen is displa yed.  
•  Select Preset -  Provides a hier archical menu  
  of sa ved  prese ts for immediate u se.  A check  
  mark sho ws the cur rently selected preset.   
  Facoty Preset  can also be called  from the  
  drop do wn men u. 
•  Tune Displa y - Opens the Smar tControl  
  Lite control panel.  
•  Smar tImage  Lite - Check cur rent settings,   
  Standard,  Internet, Game .
 
						

							14
Task  Tra y Men u Enabled
The task tr ay men u can be displ ayed  by r ight-
clicking on the Smar tControl Lite icon from the 
task tr ay. Left Click will launch the application.
The task tr ay has f ive entr ies:
•  Help -  Access to User Man ual file: Open  
  User Man ual file using the default bro wser  
  windo w. 
•  Technical Suppor t - displ ays the tech suppor t  
  page. 
•  Check f or Update  - takes the user to PDI  
  Landing and ch ecks the users v ersion against  
  the most cur rent availa ble . 
•  About - Displa ys detailed ref erence  
  information:  product v ersion,  release  
  information,  and product name . 
•  Exit - Close Smar tControl Lite
  To r un Smar tControl Lite again e ither  
  select Smar tControl Lite from Progr am  
  men u, doub le-click  the desktop P C icon or  
  restar t the sys tem. T
ask Tra y Menu Disabled
When the  Task  Tra y is disab led in the pref erence 
f older , onl
y  the EXIT selection is a vailable. 
T o completel y remove  Smar tControl  Lite 
from the task tr ay, disab le Run at Star tup in 
Options>Pref erences.  
 
						

							15
3.3 
Philips' Flat Panel Monitors Pixel    
Defect Policy
Philips strives to deliver the highest quality 
products. 	We	use	some	of	the	industr y's	most	
advanced manufacturing processes and practice 
stringent quality control. However, pixel or sub 
pixel defects on the TFT LCD panels used in flat 
panel monitors are sometimes unavoidable. No 
manufacturer can guarantee that all panels will 
be free from pixel defects, but Philips guarantees 
that any monitor with an unacceptable number 
of defects will be repaired or replaced under 
warranty. This notice explains the different types 
of pixel defects and defines acceptable defect 
levels for each type. In order to qualify for repair 
or replacement under warranty, the number of 
pixel defects on a TFT LCD panel must exceed 
these acceptable levels. For example, no more 
than 0.0004% of the sub pixels on a 18.5" XGA 
monitor may be defective. Fur thermore, Philips 
sets even higher quality standards for cer tain 
types or combinations of pixel defects that are 
more noticeable than others. This policy is valid 
worldwide.
Pixels and Sub pixels 
A pixel, or picture element, is composed of three 
sub pixels in the primar y colors of red, green and 
blue. 	Many	pixels	together	form	an	image. 	When	
all sub pixels of a pixel are lit, the three colored 
sub pixels together appear as a single white pixel. 
When	all	are	dark, 	the	three	colored	sub	pixels	
together appear as a single black pixel. Other 
combinations of lit and dark sub pixels appear as 
single pixels of other colors. Types of Pixel Defects 
Pixel and sub pixel defects appear on the screen 
in different ways. There are two categories of pixel 
defects and several types of sub pixel defects 
within each categor y. 
Bright Dot Defects Bright dot defects appear as 
pixels or sub pixels that are always lit or 'on'. That 
is, a bright dot is a sub-pixel that stands out on the 
screen when the monitor displays a dark pattern. 
There are the types of bright dot defects:
One lit red, green or blue sub pixel
Two adjacent lit sub pixels:
- 
Red + Blue = Purple
-   Red + Green = Yellow
-   Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels (one white pixel)
 
						

							16
 Note
A red or blue bright dot must be more  than 50 
percent brighter than neighboring dots while 
a green bright dot is 30 percent brighter than 
neighboring dots.
Black Dot Defects Black dot defects appear as 
pixels or sub pixels that are always dark or 'off'. 
That is, a dark dot is a sub-pixel that stands out 
on the screen when the monitor displays a light 
pattern. These are the types of black dot defects: Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same 
type that are near to one another may be more 
noticeable, Philips also specifies tolerances for the 
proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due 
to pixel defects during the warranty period, a TFT 
LCD panel in a Philips flat panel monitor must 
have pixel or sub pixel defects exceeding the 
tolerances listed in the following tables.
   BRIGHT DOT DEFECTS
ACCEPTABLE LEVEL
   MODEL  
191V2
   1 lit subpixel 3
   2 adjacent lit subpixels 1
   3 adjacent lit subpixels (one white pixel) 0
   Distance between two bright dot defects* >15mm
   Total bright dot defects of all types 3
   BLACK DOT DEFECTSACCEPTABLE LEVEL
   MODEL 191V2
   1 dark subpixel 5 or fewer
   2 adjacent dark subpixels 2 or fewer
   3 adjacent dark subpixels 0
   Distance between two black dot defects* >15mm
   Total black dot defects of all types 5 or fewer
   TOTAL DOT DEFECTSACCEPTABLE LEVEL
   MODEL 191V2
    Total bright or black dot defects of all types 5 or fewer
 
Note 
1 or 2 adjacent sub pixel defects = 1 dot defect
This monitor is ISO9241-307 compliant.
 
						

							17
4 Technical Specifications
191V2
   Picture/Display
   LCD panel type    TFT-LCD
   Backlight    CCFL
   Panel size 			18.5"	W(	47	cm)
   Aspect ratio    16:9
   Pixel Pitch    0.300 x 0.300 mm
   Brightness    250 cd/m² 
   Smar tContrast    300000:1
   Contrast ratio (typ.)    1000:1
   Response time (typical)     5 ms
   Optimum Resolution    1366x768 @ 60Hz
    Viewing angle    176° (H) / 170° (V) @ C/R > 5
   Picture Enhancement    Smar tcontrol Lite
   Display colors     16.7 M
    Ver tical refresh rate    56Hz -76Hz 
   Horizontal Frequency    30kHz - 80kHz
   sRGB     YES
   Connectivity
   Signal input    DVI-D (digital, HDCP), VGA (Analog)
   Input Signal    Separate Sync, Sync on Green
   Convenience
   User Convenience 				4:3	Wide/
, Power On/Off , Menu (OK),  
    Brightness/,  AUTO/back,
   OSD Languages    English, French, German, Italian, Russian, Spanish, 
   Simplified Chinese, Por tuguese
   Other convenience    VESA mount ( 100 x 100mm), Kensington lock
   Plug & Play Compatibility 			DDC/CI,	sRGB,	Windows	7/Vista/XP, 	Mac	OSX,	Linux	
   Stand
   Tilt     -5/+20 (191V2)
 
						

							18
   Power
   On mode
   (EnergyStar 5.0 test method)  		16.6W
   Energy Consumption
   (EnergyStar 5.0 test method)    AC Input Voltage at  
 100VAC +/-5VAC, 
  50Hz +/- 3Hz  AC Input Voltage at
  115VAC +/-5VAC, 
  60Hz +/- 3Hz   AC Input Voltage at
  230VAC +/-5VAC,
  50Hz +/ -3Hz
   Normal Operation (typical)  		15.66W		15.48W 		15.55W
   Sleep 		0.15W		0.16W 		0.2W
   Off 		0.15W		0.14W 		0.12W
   Heat Dissipation*   AC Input Voltage at 
  100VAC +/-5VAC,
  50Hz +/ -3Hz  AC Input Voltage at
  115VAC +/-5VAC, 
  60Hz +/ -3Hz   AC Input Voltage at 
  230VAC +/-5VAC, 
  50Hz +/ -3Hz
   Normal Operation 		15.83W			15.98W	 		16.12W	
   Sleep 		0.15W		0.15W 		0.18W
   Off 		0.11W		0.12W 		0.14W
   Power LED indicator   On mode: Green, Standby/Sleep mode: Amber
   Power Supply   Build-in, 100-240VAC, 50/60Hz
   Dimension
			Product	with	stand	(WxHxD)	   445 x335 x161mm 
   Product without stand
			(WxHxD)	   445x270x64mm
			Box	dimension	(WxHxD)   490x350x128mm 
   Weight
   Product with stand    3.48kg 
   Product without stand   3.23kg
   Product with packaging   4.61Kg
   Operating Condition
   Temperature range (operation)   0°C to 40 °C
   Temperature range (operation)    -20°C to 60°C 
   Relative humidity   20% to 80%
   Altitude   Non-operation: + 12,000 ft ( 3,658 m)
  operation: + 40,000 ft ( 12,192 m)
   MTBF   50000 hrs