Philips 191v2sb User Manual

31
Consumer Information Centers
Argentina / Australia / Brasil / Canada / 
New Zealand / Belarus / Bulgaria / Croatia / 
Czech Republic / Estonia / United Arab Emirates / 
Hong Kong / Hungar y / India / Indonesia / 
Israel / Latvia / Lithuania / Malaysia / 
Middle East + Nor th Africa / New Zealand / 
Pakistan / Romania / Russia / 
Serbia & Montenegro / Singapore / Slovakia / 
Slovenia / South Africa / South Korea / Taiwan / 
Philippines / Thailand / Turkey / Ukraine / 
Vietnam
Eastern Europe
BELARUS...

32
ROMANIA
Blue Ridge Int'l Computers SRL
115, Mihai Eminescu St., Sector 2
RO - 020074 Bucharest
Tel: +40 21 2101969
SERBIA & MONTENEGRO
Kim Tec d.o.o.
Viline vode bb, Slobodna zona 
Beograd L12/3
11000 Belgrade
Serbia 
Tel. +381 11 20 70 684
SLOVAKIA
General Consumer Information Center 
0800004551
Datalan Ser visne Stredisko
Puchovska 8
SK - 831 06 Bratislava 
Tel: +421 2 49207155
Email: ser [email protected]
SLOVENIA
PC HAND 
Brezovce 10 
SI - 1236 Trzin 
Tel: +386 1 530 08 24
Email: ser...

33
NEW ZEALAND
Company:  Visual Group Ltd. 
Address:
		28	Walls	Rd	Penrose	 Auckland
Phone:  0800 657447
Fax:  09 5809607
E-mail:  [email protected]
Ser vice  Hours: Mon.~Fri. 8:30am~5:30pm
Asia
HONG KONG/Macau
Company Name: PHK Ser vice Limited
Address: Flat A, 10/F., Pak Sun Building, 103 - 107 
Wo	 Yi	Hop	Road, 	Kwai	Chung,	New	Territories, 	
Hong Kong
Tel.: (852) 2610-6908 / (852) 2610-6929 for Hong 
Kong and (853) 2856-2277 for Macau
Fax: (852) 2485 3574 for Hong Kong and (853) 
2856...

34
Singapore 
Company: Philips Electronics Singapore Pte Ltd 
(Philips Consumer Care Center)
Address: 620A Lorong 1 Toa Payoh, TP4 Building 
Level 1, Singapore 319762
Tel: (65) 6882 3999
Fax: (65) 62508037
E-mail: [email protected]
Ser vice hours: Mon.~Fri. 9:00am~6:00pm; Sat. 
9:00am~1:00pm
Taiwan
Company: FETEC .CO 
Address: 3F, No.6, Lane 205, Sec. 1, Chang Hsing 
Rd, Lu Chu Hs, Taoyuan, Taiwan R.O.C 33800 
Consumer Care: 0800-231-099 
Tel: (03)2120336 
Fax: (03)3129184 
E-mail:...

39
7.1 
Troubleshooting
This page deals with problems that can be 
corrected by a user. If the problem still persists 
after you have tried these solutions, contact Philips 
customer ser vice representative.
  Common Problems
No Picture (Power LED not lit)
•	 Make	sure	the	power	cord	is	plugged	into		
  the power outlet and into the back of the  
  monitor. 
•	 First, 	ensure	that	the	power	button	on	the		
  front of the monitor is in the OFF position,  
  then press it to the ON position.
No Picture...

40
Horizontal flicker appears
•	 Adjust	the	image	using	the	“Auto”	function		
  in OSD Main Controls. 
•	 Eliminate	the	ver tical	bars	using	the	Phase/	
  Clock of Setup in OSD Main Controls. It is  
  valid only in VGA mode.
Image appears blurred, indistinct or too dark
•	 Adjust	the	contrast	and	brightness	on	
  On-Screen Display.
An "after-image", "burn-in" or "ghost image" 
remains after the power has been turned off.
•	 Uninterrupted	display	of	still	or	static	images		
  over...

41
7.2 
SmartControl Lite FAQs
Q1.   I change the monitor on a PC to a  
    different one and the SmartControl  
    Lite becomes un-usable,  what do I  
    do?
Ans.:  Restar t your PC and see if Smar tControl  
   Lite can work. Otherwise, you will  
    need to remove and re-install Smar tControl   
   Lite to ensure proper driver is installed.
Q2.   The SmartControl Lite functions  
    worked well before, but it does not work  
    anymore, what can I do?
Ans.:  If the following actions were...

42
7.3 General FAQs
Q1:   When I install my monitor what should I  
    do if the screen shows 'Cannot display this  
    video mode'?
Ans.:  Recommended resolution for Philips 18.5":  
    1366 x 768 @60Hz.
  • Unplug all cables, then connect your PC to  
    the monitor that you used previously. 
  • In	the	 Windows	Star t	Menu, 	select	Settings/	
	 	 Control	 Panel.	In	 the	 Control	 Panel	Window, 		
    select the Display icon. Inside the Display
    Control Panel, select the...

43
Q8:  
Can I change the color setting of my  
    monitor?
Ans.:  Yes, you can change your color setting  
    through OSD control as the following  
    procedures,
  • Press "OK" to show the OSD (On Screen  
    Display) menu
  • Press "Down Arrow" to select the option  
    "Color" then press "OK" to enter color  
    setting, there are three settings as below.
   1.   Color Temperature; The six settings  
        are 5000K, 6500K, 7500K, 8200K, 9300K  
	 	 	 	 and...

44
   
gives superior results over TN panel.
Q13:   What is Image Sticking, or Image   
    Burn-in, or After Image, or Ghost Image in  
    LCD panels? 
Ans.:  Uninterrupted display of still or static images  
    over an extended period may cause 
    "burn in", also known as "after-imaging" or  
    "ghost imaging", on your screen. "Burn-in", 
    "after-imaging", or "ghost imaging" is a 
    well-known phenomenon in LCD panel 
    technology. In most...