Philips 190cw8f User Manual
Have a look at the manual Philips 190cw8f User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
4NBSU.BOBHF
Example for on line register Theft Deterrence PIN
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8QSPEVDU4.35)5. K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-55.png "Page 56
4NBSU.BOBHF
Example for on line register Theft Deterrence PIN
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8QSPEVDU4.35)5. K+")
![Page 57
4NBSU.BOBHF
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and settings by a
software interface, instead of the hardware buttons at the front bezel o\
f the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A....](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-56.png "Page 57
4NBSU.BOBHF
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and settings by a
software interface, instead of the hardware buttons at the front bezel o\
f the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A....")
![Page 58
4NBSU.BOBHF
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8QSPEVDU4.35)5. K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-57.png "Page 58
4NBSU.BOBHF
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8QSPEVDU4.35)5. K+")
![Page 59
*OTUBMMJOH:PVS-$%.POJUPS
•
Front View Produt Description
• Connecting to Your PC
• The Base
• SmartAccessory
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD menu
4
To adjust brightness of the display
5
InputTo change the signal input source.
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings.
Return...](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-58.png "Page 59
*OTUBMMJOH:PVS-$%.POJUPS
•
Front View Produt Description
• Connecting to Your PC
• The Base
• SmartAccessory
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD menu
4
To adjust brightness of the display
5
InputTo change the signal input source.
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings.
Return...")
![Page 60
*OTUBMMJOH:PVS-$%.POJUPS
Rear View
1USB downstream port
2 AC power input
3 DVI-D input (Available for selected countries)
4 VGA input
5 USB upstream port
6 Kensington anti-thief lock
RETURN TO TOP OF THE PAGE
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1440x\
900, 60Hz.
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMJOTUBMMIUN K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-59.png "Page 60
*OTUBMMJOH:PVS-$%.POJUPS
Rear View
1USB downstream port
2 AC power input
3 DVI-D input (Available for selected countries)
4 VGA input
5 USB upstream port
6 Kensington anti-thief lock
RETURN TO TOP OF THE PAGE
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1440x\
900, 60Hz.
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMJOTUBMMIUN K+")
![Page 61
*OTUBMMJOH:PVS-$%.POJUPS
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.
RETURN TO TOP OF THE PAGE
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMJOTUBMMIUN K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-60.png "Page 61
*OTUBMMJOH:PVS-$%.POJUPS
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.
RETURN TO TOP OF THE PAGE
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMJOTUBMMIUN K+")
![Page 62
$POOFDUJOHUP:PVS1$
• Front View Product
Description
• Accessory Pack
• Connecting to Your PC
• Getting Started
• Optimizing Performance
• The base
Connecting to Your PC
Accessory Pack
Unpack all the parts.
Power cord USB cable
VGA cable EDFU pack
RETURN TO TOP OF THE PAGE
Connecting to Your PC
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-61.png "Page 62
$POOFDUJOHUP:PVS1$
• Front View Product
Description
• Accessory Pack
• Connecting to Your PC
• Getting Started
• Optimizing Performance
• The base
Connecting to Your PC
Accessory Pack
Unpack all the parts.
Power cord USB cable
VGA cable EDFU pack
RETURN TO TOP OF THE PAGE
Connecting to Your PC
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+")
![Page 63
$POOFDUJOHUP:PVS1$
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
2) Connect to PC
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-62.png "Page 63
$POOFDUJOHUP:PVS1$
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
2) Connect to PC
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+")
![Page 64
$POOFDUJOHUP:PVS1$
(a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our
computer.
(c)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
(d)
Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
RETURN TO TOP OF THE PAGE
...](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-63.png "Page 64
$POOFDUJOHUP:PVS1$
(a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our
computer.
(c)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
(d)
Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
RETURN TO TOP OF THE PAGE
...")
![Page 66
5IF#BTF
Detach the Base
%FUBDI 1) Remove the cable cover as illustrated below.
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+](http://img.usermanuals.tech/thumb/59/52312/w64_philips_190cw8f-user-manual-65.png "Page 66
5IF#BTF
Detach the Base
%FUBDI 1) Remove the cable cover as illustrated below.
GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+")
*OTUBMMJOH:PVS-$%.POJUPS Note: You can check the current display settings by pressing the OK button \ once. The current display mode is shown in OSD main controls called RESOLUTION. RETURN TO TOP OF THE PAGE GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMJOTUBMMIUN K+
$POOFDUJOHUP:PVS1$ • Front View Product Description • Accessory Pack • Connecting to Your PC • Getting Started • Optimizing Performance • The base Connecting to Your PC Accessory Pack Unpack all the parts. Power cord USB cable VGA cable EDFU pack RETURN TO TOP OF THE PAGE Connecting to Your PC GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+
$POOFDUJOHUP:PVS1$ 1) Connect the power cord to the back of the monitor firmly. (Philips has\ pre-connected VGA cable for the first installation. 2) Connect to PC GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+
$POOFDUJOHUP:PVS1$ (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of y\ our computer. (c) Plug the power cord of your computer and your monitor into a nearby outl\ et. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. RETURN TO TOP OF THE PAGE GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMDPOOFDUIUN K+
5IF#BTF • Front View Product Description • Accessory Pack • Connecting to your PC • Getting Started • Optimizing Performance • Attach the Base • Detach the Base The Base Attach and Detach the Base Attach the Base 1) Place the base on flat surface, slide the monitor body onto the base. 2)Install cable cover as illustrated below. GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+
5IF#BTF Detach the Base %FUBDI 1) Remove the cable cover as illustrated below. GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+
5IF#BTF 2)Place the monitor face on a safe surface, push down on the release butto\ n and pull the base away from the monitor body. SmartAccessory GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+
5IF#BTF SmartAccessory items (Smart Clip, Pen holder SmartAccessory, MP3/Phone \ holder SmartAccessory,) are no covered by Philips warranty. Items on SmartAccessory holder should not exceed 300g. RETURN TO TOP OF THE PAGE GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMCBTFIUN K+
(FUUJOH4UBSUFE Your LCD Monitor : • Front View Product Description • Setting Up and Connecting Your Monitor • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vist\ a or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\ requirements for Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) shou\ ld be installed in order that your Philips monitor can be enabled from the Monitor dialog box in Win\ dows® 95/98/2000/Me/ XP/Vista and the Plug & Play application can be activated. The installat\ ion procedure based on Windows® 95 OEM Release 2 , 98 , 2000 , Me, XP and Vista is specifie\ d as follows. For Windows® 95 Start Windows® 95 Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, point to Change... then click on Have Di\ sk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button then select your monitor model and click on OK\ . Click on the Close button. For Windows® 98 Start Windows® 98 Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, point to Change... then click on Next Select Display a list of all the drivers in a specific location, so you\ can choose the driver you want. then click on Next and then click on Have Disk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button then select your monitor model and click on the\ Next button. Click on the Finish button then the Close button. For Windows® 2000 Start Windows® 2000 GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMHU@TUBSUIUN K
(FUUJOH4UBSUFE Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select Monitor - If the Properties button is inactive, it means your monitor is prope\ rly configured. Please stop installation. - If the Properties button is active. Click on Properties button. Pl\ ease follow the steps given below. Click on Driver and then click on Update Driver... then click on the\ Next button. Select Display a list of the known drivers for this device so that I ca\ n choose a specific driver, then click on Next and then click on Have disk.... Click on the Browse... button then select the appropriate drive F: ( \ CD-ROM Drive). Click on the Open button, then click on the OK button. Select your monitor model and click on the Next button. Click on the Finish button then the Close button. If you can see the Digital Signature Not Found window, click on the Y\ es button. For Windows® Me Start Windows® Me Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, then click on Change... button. Select Specify the location of the driver(Advanced) and click on the\ Next button. Select Display a list of all the drivers in a specific location, so you\ can choose the driver you want, then click on Next and then click on Have Disk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button, select your monitor model and click on the Ne\ xt button. Click on Finish button then the Close button. For Windows® XP Start Windows® XP Click on the Start button and then click on Control Panel. Select and click on the category Printers and Other Hardware Click on the Display Item. Select the Settings tab then click on the Advanced button. Select Monitor tab - If the Properties button is inactive, it means your monitor is prope\ rly configured. Please stop installation. - If the Properties button is active, click on Properties button. Please follow the steps below. Click on the Driver tab and then click on Update Driver... button. Select the Install from a list or specific location [advanced] radio b\ utton and then click on the Next button. Select the Dont Search. I will choose the driver to install radio but\ ton. Then click on the Next button. GJMF)]0&..0%&-41IJMJQT$%.BOVBM$8$8&%6MDENBOVBM&OHMJTI$8JOTUBMMHU@TUBSUIUN K