Philips 190c8f User Manual

							
SmartManage
2. Start with Standard pane:
Adjust menu:
l     Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position an\
d Resolution. l     You can follow the instruction and do the adjustment.l     Cancel prompts user if you want to cancel installation.
Tab Heading Sub Menu Display in AnalogDisplay in Digital
Adjust  Brightness YesYes
Adjust  Contrast
 Yes Yes
Adjust  Focus (Clock & Clock Phase) YesNo
Adjust  Position  YesNo
Adjust  Resolution  YesYes
 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (9 of 16)2008-3-31 12:40:40 
						

							
SmartManage
Color menu:
l     Color Menu allow you to adjust RGB, Black Level, White Point, Color Cali\
bration, and 
SmartImage (Please refer to SmartImage section).
l     You can follow the instruction and do the adjustment.l     Refer to below table for sub-menu item base on your input.
Tab Heading Sub MenuDisplay in Analog Display in Digital
Color RGB Yes Yes
Color
 Black Level Yes Yes
Color White Point YesYes
Color Color Calibration  YesYes
Color Viewing Mode YesYesExample for Color 
Calibration
 
 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (10 of 16)2008-3-31 12:40:40 
						

							
SmartManage
Optional Menu
l     Option Menu let you to activate some features like AutoPivot, Preference\
, Input Selection and Audio 
Function.
l     You can follow the instruction and do the adjustment.l     Refer to below table for sub-menu item base on your input.
Tab Heading Sub MenuDisplay in Analog Display in Digital
Options Auto Pivot YesYes
Options Preferences
 Yes Yes
Options Input Yes Yes
Options Audio  Yes Yes
 
 
 
 
AutoPivot, Input and Audio function will only available and shown if the\
 product supports those features.
Help Menu
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (11 of 16)2008-3-31 12:40:40 
						

							
SmartManage
l     Help Menu will give you some information of Manual, Update, ID, System I\
D and 
version. 
l     If you ask for technical support. It will automatically generate a repor\
t for Philips 
supporting to understand your enviorment by click Tech. Support.
l     Refer to below table for sub-menu item base on your input.
Tab Heading Sub MenuDisplay in Analog Display in Digital
Help User Manual  YesYes
Help Update
 Yes Yes
Help Display ID YesYes
Help System ID  YesYes
Help Version Yes YesExample for support form after 
you click Tech. Support
 
 
Plug Ins Menu
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (12 of 16)2008-3-31 12:40:40 
						

							
SmartManage
l     Plug Ins Menu will allow you to have more add on features if applicable.\
 l     PIP and Zoning functions will only support for the models with Video inp\
uts.l     SmartManage Lite for Asset Management will only be supported if you acti\
vate it 
when installation. Personal user usually will not need this function. 
l     Please follow the screen instruction for Theft deterrence function. You \
need to 
have Internet access to register your PIN.
l     We also suggest you to have at least 10 to 15 mins. time when you change\
 
different PC and enter your PIN. 
l     You can activate Wizard like the first launch.
Tab Heading Sub MenuDisplay in Analog Display in Digital
Plug Ins PIP Yes Yes
Plug Ins Zoning
 Yes Yes
Plug Ins Asset Management YesYes
Plug Ins Theft Deterrence YesYes
Plug Ins Wizard YesYesExample for on line register theft 
Deterrence PIN
 
Example for Theft Deterrence
 
 
 
 
 
 
 
 
 
PIP, Zoning, Asset Management and Theft Deterrence will only available a\
nd shown if the product supports those 
features Theft Deterrence Philips Theft Deterrence minimizes theft or un\
authorized relocation of your display. 
Theft Deterrence does not prevent the display from being stolen, but hin\
ders the operation of the display once it is 
removed from the “Theft Deterrence enabled” host computer. To get \
started, you will need to register a personal 
identification number (PIN). 
Example for Theft Deterrence
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (13 of 16)2008-3-31 12:40:40 
						

							
SmartManage
Example for on line register Theft Deterrence PIN
 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (14 of 16)2008-3-31 12:40:40 
						

							
SmartManage
Q&A
Q1. What is the difference between SmartManage, SmartControl? 
A. SmartManage is a remote management/control software for IT managers to m\
anage monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and settings by a software interface, 
instead of the hardware buttons at the front bezel of the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do? 
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove and re-install SmartControl to ensure 
proper driver is installed.
Q3. The SmartControl functions well at the beginning, but it is not workable\
, what can I do? 
A. If the following actions were executed, the monitor driver may need to \
be re-installed.
l     Change video graphic adapter to another onel     Update video driverl     Activities on OS, such as service pack or patchl     Run Windows Update and updated monitor and/or video driverl     Windows was booted with the monitor power off or disconnected.
To find out, please right click My Computer and click on Properties->Har\
dware-> Device Manager.  
If you see Plug and Play Monitor shows under Monitor, then you need to\
 re-install. Simply remove SmartControl and re-install it. 
 Q4. After installing SmartControl, when clicking on SmartControl tab, nothi\
ng shows up after a while or a failure message shows, 
what happened?
A. It might be your graphic adaptor is not compatible with the SmartContro\
l. If your graphic adaptor is one of the above mentioned 
brands, try to download the most updated graphic adaptor driver from cor\
responding companies’ web site. Install the driver. Remove 
SmartControl, and re-install it once more.
If it is still not working, we are sorry that the graphic adaptor is not\
 supported. Please pay attention to Philips’ web site for any 
updated SmartControl driver available.
Q5. When I click on Product Information, only partial information is shown,\
 what happened?
A. It might be your graphic card adaptor driver is not the most updated ve\
rsion which fully supporting DDC/CI interface. Please try to 
download the most updated graphic adaptor driver from corresponding comp\
anies’ web site. Install the driver. Remove 
SmartControl, and re-install it once more.
Q6. I forgot my PIN for Theft Deterrence Function. How can I do? 
 
A.
 Please contact IT manager or Philips ServiceCenter.
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (15 of 16)2008-3-31 12:40:40 
						

							
SmartManage
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is not responding, 
why? 
 
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to disable Smartlmage with 
the 
 button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
 
 
        
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/product/SMART.H\
TM (16 of 16)2008-3-31 12:40:40 
						

							
Installing Your LCD Monitor 
   
        
 
 •  Front View Produt Description
 • Connecting to Your PC
 • The Base 
 • Getting Started 
 • Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
  To adjust the OSD
4
To adjust brightness of the display
5
Automatically adjust the horizontal position, vertical position, 
phase and clock settings / Return to previous OSD level. 
6
InputTo change the signal input source. 
7
There are five modes to be selected: Office Work, Image 
Viewing, Entertainment, Economy, and Off. 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/install\
.htm (1 of 3)2008-3-31 12:40:41 
						

							
Installing Your LCD Monitor 
 
RETURN TO TOP OF THE PAGE
Rear View
 
1Kensington anti-thief lock 
2 VGA input
3 AC power input
4.
 DVI-D input
 
RETURN TO TOP OF THE PAGE 
Optimizing Performance 
    
 
   
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/install\
.htm (2 of 3)2008-3-31 12:40:41