Philips 170c7f User Manual

Product Information
   
        
 
• Product Features
• Lead-free Product
• Technical Specifications
• Resolution & Preset Modes
• Philips Pixel Defect Policy
• Automatic Power Saving
• Physical Specification
• Pin Assignment
• Product Views
• Physical Function
• SmartManage  
Product Information 
Product Features
170C7
l     Design that complements any interior 
m     Chic dual-tone design enlivens your space
m     Convenient, understated control buttons create a clean look
m     Hug bezel for a warm,...

Product Information
• LCD Panel type 1280 x 1024 pixels 
R.G.B. vertical stripe  
Anti-glare polarizer, hard coated
 
• Effective viewing area
337.9 x 270.3 mm
 
SCANNING
Vertical refresh rate56 Hz-76 Hz
Horizontal Frequency 30k Hz-83 kHz
VIDEO
• Video dot rate140 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2K ohm
• Input signal levels 700m Vpp
• Sync input signal Separate sync
  
Composite sync 
Sync on green
 
• Sync polarities
Positive and negative
Optical characteristics 
• Peak contrast angle6...

Product Information
Resolution & Preset Modes
• Maximum1280 x 1024 at 75 Hz 
• 
Recommended 1280 x 1024 at 60 Hz
24 user definable modes  
19 factory preset modes:
H. freq (kHz) Resolution V. freq (Hz)
31.5 720*400 70
31.5 640*480 60
35.0 640*480 67
37.9 640*480 73
37.5 640*480 75
35.2 800*600 56
37.9 800*600 60
48.1 800*600 72
46.9 800*600 75
48.4 1024*768 60
56.5 1024*768 70
60.0 1024*768 75
67.5 1152*864 75
60.0 1280*960 60
63.9 1280*1024 60
80.0 1280*1024 75
49.7 823*624 75
68.7 1152*870 75
71.8...

Product Information
 reduce its power consumption when not in use. If an input from a keyboar\
d, mouse or other input device is detected, 
the monitor will wake up automatically. The following table shows the \
power consumption and signaling of this 
automatic power saving feature: 
Power Management Definition 
VESA Mode  Video H-sync V-sync Power Used  LED color 
Active ON Yes Yes < 31 W (typ.)Green 
Sleep OFF No No < 1 W Amber 
Switch Off OFF--< 1W Off
This monitor is 
ENERGY STAR® compliant. As an...

Product Information
Pin Assignment
1. The DVI connector contains 24 signal contacts organized in three rows\
 of eight contacts. Signal pin assignments are 
listed in the following table: 
Pin No.  Signal Assignment
 Pin 
No.  Signal Assignment
 Pin 
No.
Signal Assignment
1 T.M.D.S. Data2-
9 T.M.D.S. Data1-17T.M.D.S. Data0-
2
 T.M.D.S. Data2+ 10 T.M.D.S. Data1+18T.M.D.S. Data0+
3
 T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield19T.M.D.S. Data0/5 Shield
4
 No connect  12 No connect 20No connect 
5
 No...

Product Information
6 Red video ground14 V. Sync (VCLK for DDC)
7
 Green video ground 15 Data clock line (SCL)
8
 Blue video ground
 
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.\
Front View Product Description
 
RETURN TO TOP OF THE PAGE
Physical Function 
 
 
1) Tilt
 
 
 
 
 
 
 
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/170C7/manual/english/170c7/product/product.htm (6 o\
f 7)2006-07-28 11:03:04 AM 

Product Information
 
        
file:///D|/EDFU/LCD/170C7/manual/english/170c7/product/product.htm (7 o\
f 7)2006-07-28 11:03:04 AM 

Philips Pixel Defect Policy
   
        
 
 
• 
Product Features
 •Technical Specifications
 •Resolution & Preset Modes
 •Automatic Power Saving
 •Physical Specification
 •Pin Assignment
 •Product Views
 •SmartManage 
 
  
 
Philips Pixel Defect Policy
Philips Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most advanced manufacturing processes and practice 
stringent quality control. However, pixel or sub pixel defects on...

Philips Pixel Defect Policy
 
 
 
A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a gre\
en bright dot is 30 percent 
brighter than neighboring dots.
 
 
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or\
 off. That is, a dark dot is a sub-pixel that stands out 
on the screen when the monitor displays a light pattern. These are the t\
ypes of black dot defects:
One dark sub pixel Two or three adjacent dark sub pixels...

Philips Pixel Defect Policy
3 adjacent dark subpixels0
Distance between two black dot defects* 15 mm or more
Total black dot defects of all types 4 or fewer
 
TOTAL DOT DEFECTSACCEPTABLE LEVEL 
MODEL 170C7
Total bright or black dot defects of all types 5 or fewer
 
Note: 
* 1 or 2 adjacent sub pixel defects = 1 dot defect 
All Philips monitors are ISO13406-2 Compliant
 
RETURN TO TOP OF THE PAGE
  
        
file:///D|/EDFU/LCD/170C7/manual/english/170c7/product/pixel.htm (3 of \
3)2006-07-28 11:03:09 AM