Panasonic Wv Ns954 Operating Instructions Manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Network Camera
Operating Instructions 
Model Nos.WV-NS954
WV-NW964
WV-NS954 WV-NW964 

2
CONTENTS
Preface ............................................................................................................................ 3
About these operating instructions  .............................................................................. 3
Trademarks and registered trademarks  ...................................................................... 3
Viewer software ........................................................................................................... 3
Monitor...

3
Preface
About these operating instructions
There are 3 sets of operating instructions for the WV-NS954, WV-NW964as follows.
• Installation Guide
•Operating instructions
• Setup Instructions
• WV-NS954 Network camera (for indoor use)
• WV-NW964 Network camera (for outdoor use)
* The screens used in these Setup Instructions show the case of WV-NS954.
These operating instructionscontain descriptions of how to operate this product*using a PC via a network and of
how to configure the settings.
Refer to the...

4
Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera
Notes:
• When ON is selected for User Authentication, the
authentication window will be displayed before dis-
playing live images for the user name and password
entries. The default user name and password are as
follows.
User name: admin
Password: 12345
When accessing the camera without changing the
default password, the pop-up window saying that it
is recommended...

5
About the Live page
q[Setup] button (*1)
Click this button to display the setup menu. The but-
ton will turn green and the setup menu will be dis-
played.
w[Live] button
Click this button to display the Live page. The but-
ton will turn green and the Live page will be dis-
played.
eMulti-screen buttons
Images from multiple cameras can be displayed on
a multi-screen by registering cameras on the setup
menu. (page 9)rImage type buttons
:The letters MPEG-4 on the button will
turn green and an MPEG-4...

6
yAUX buttons (*2)
These buttons will be displayed only when Terminal
alarm 3 is selected for AUX output on the setup
menu.  (Setup Instructions)
:The letters OPEN on the button will turn
green and the status of AUX connector will
be open. 
:The letters CLOSE on the button will turn
green and the status of the AUX connector
will be closed. 
u[SD] button (manual SD recording
button) (*2)
This button will be displayed only when Manual is
selected for Save trigger on the setup menu.  
(Setup...

7
Preset map-shot:8 thumbnail images of the preset
position 1-8 (Setup Instructions) will be displayed
orderly on a newly displayed window. When a
thumbnail image is clicked, the camera moves to the
respective position and live images will be displayed
on the Live page.
Notes:
• Do not operate the browser until all the thumbnail
images are displayed and the camera returns to the
original position (where the camera was when 360°
map-shot or Preset map-shot was carried out).
• When 360 map-shot is carried...

8
!7Full screen button
Images will be displayed on a full screen. To return
to the Live page, press the [Esc] key. When dis-
playing images on a full screen, the audio transmis-
sion button will become unavailable.
!8One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-
up menu will be displayed. The displayed image can
be saved on the PC by selecting Save from the
pop-up menu....

9
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can
be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4
cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. (Setup Instructions)
Important:
• When simultaneously displaying images from 16 cameras on a multi-screen, panning, tilting and zooming are
unavailable.
•...

10
Record images on the SD memory card manually
Images displayed on the Live page can be recorded on the SD memory card manually.
This button is operable only when Manual is selected for Save trigger on the setup menu. (Setup Instructions)
Images recorded on the SD memory card can be copied onto the PC. (Setup Instructions)
Step 1
Display the Live page. (page 5)
Step 2
Click the [SD] button in the SD memory card box.
→The SD recording window will open.
Step 3
Click the [START] button to start...