Panasonic Wv Np244 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Np244 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
Step 1
Set the video motion detection area by dragging the
mouse on the screen. When the [All areas] button is
clicked, the whole area will become the VMD area, and
1 (White) will be automatically applied to Area.
→The designated area will become the VMD area and
the outline will be displayed. When 2 - 4 VMD areas
are set, each area will be numbered in order.
The areas will be identified by the respective outline
colors. Step 2
Select ON or OFF for Status of each VMD area.
When the [SET] button is...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-30.png "Page 31
Step 1
Set the video motion detection area by dragging the
mouse on the screen. When the [All areas] button is
clicked, the whole area will become the VMD area, and
1 (White) will be automatically applied to Area.
→The designated area will become the VMD area and
the outline will be displayed. When 2 - 4 VMD areas
are set, each area will be numbered in order.
The areas will be identified by the respective outline
colors. Step 2
Select ON or OFF for Status of each VMD area.
When the [SET] button is...")
Step 1 Set the video motion detection area by dragging the mouse on the screen. When the [All areas] button is clicked, the whole area will become the VMD area, and 1 (White) will be automatically applied to Area. →The designated area will become the VMD area and the outline will be displayed. When 2 - 4 VMD areas are set, each area will be numbered in order. The areas will be identified by the respective outline colors. Step 2 Select ON or OFF for Status of each VMD area. When the [SET] button is...
Page 32
![Page 32
32
Delete the set VMD area
Step 1
Click the [Delete] button respective to the area to be
deleted.
→The outline of the area will disappear.
Step 2
Click the [SET] button.
→The deletion will be completed.
Important:
The deletion will not be completed unless the [SET]
button is clicked.](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-31.png "Page 32
32
Delete the set VMD area
Step 1
Click the [Delete] button respective to the area to be
deleted.
→The outline of the area will disappear.
Step 2
Click the [SET] button.
→The deletion will be completed.
Important:
The deletion will not be completed unless the [SET]
button is clicked.")
32 Delete the set VMD area Step 1 Click the [Delete] button respective to the area to be deleted. →The outline of the area will disappear. Step 2 Click the [SET] button. →The deletion will be completed. Important: The deletion will not be completed unless the [SET] button is clicked.
Page 33
![Page 33
33
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the Alarm setup page. (page 16)
The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (page 37)
[E-mail notification]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence.
Default:OFF
[Attach image]
Select ON or OFF...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-32.png "Page 33
33
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the Alarm setup page. (page 16)
The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (page 37)
[E-mail notification]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence.
Default:OFF
[Attach image]
Select ON or OFF...")
33 Configure the settings relating to the mail notification [Notification] Click the [Notification] tab on the Alarm setup page. (page 16) The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it is necessary to configure the settings of the mail server. (page 37) [E-mail notification] Select ON or OFF to determine whether or not to notify of an alarm occurrence by e-mail at an alarm occurrence. Default:OFF [Attach image] Select ON or OFF...
Page 34
![Page 34
34
Configure the settings relating to Panasonic alarm protocol [Panasonic alarm
protocol]
Click the [Notification] tab on the Alarm setup page. (page 16)
The settings relating to Panasonic alarm protocol can be configured on this page.
[Panasonic alarm protocol]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by Panasonic alarm proto-
col when an alarm is detected.
Default:OFF
[Destination port]
Select a destination port of the Panasonic alarm proto-
col from the...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-33.png "Page 34
34
Configure the settings relating to Panasonic alarm protocol [Panasonic alarm
protocol]
Click the [Notification] tab on the Alarm setup page. (page 16)
The settings relating to Panasonic alarm protocol can be configured on this page.
[Panasonic alarm protocol]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by Panasonic alarm proto-
col when an alarm is detected.
Default:OFF
[Destination port]
Select a destination port of the Panasonic alarm proto-
col from the...")
34 Configure the settings relating to Panasonic alarm protocol [Panasonic alarm protocol] Click the [Notification] tab on the Alarm setup page. (page 16) The settings relating to Panasonic alarm protocol can be configured on this page. [Panasonic alarm protocol] Select ON or OFF to determine whether or not to notify of an alarm occurrence by Panasonic alarm proto- col when an alarm is detected. Default:OFF [Destination port] Select a destination port of the Panasonic alarm proto- col from the...
Page 35
![Page 35
35
Configure the settings relating to the authentication
[Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-
figured on this page.
The Authentication setup page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the Authentication setup page. (page 16)
The settings relating to the user authentication can be configured on this...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-34.png "Page 35
35
Configure the settings relating to the authentication
[Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-
figured on this page.
The Authentication setup page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the Authentication setup page. (page 16)
The settings relating to the user authentication can be configured on this...")
35 Configure the settings relating to the authentication [Authentication setup] The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con- figured on this page. The Authentication setup page has 2 tabs of the [User] tab and the [Host] tab. Configure the settings relating to the user authentication [User] Click the [User] tab on the Authentication setup page. (page 16) The settings relating to the user authentication can be configured on this...
Page 36
![Page 36
36
Configure the settings relating to the host authentication [Host]
Click the [Host] tab on the Authentication setup page. (page 16)
The settings to restrict PCs (IP address) to access the camera can be configured on this page.
[Host authentication]
Select ON or OFF to determine whether or not to
authenticate the host.
Default:OFF
Important:
Before configuring the host authentication, it is nec-
essary to register IP addresses of the PCs to be
allowed to access the camera and determine their
access...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-35.png "Page 36
36
Configure the settings relating to the host authentication [Host]
Click the [Host] tab on the Authentication setup page. (page 16)
The settings to restrict PCs (IP address) to access the camera can be configured on this page.
[Host authentication]
Select ON or OFF to determine whether or not to
authenticate the host.
Default:OFF
Important:
Before configuring the host authentication, it is nec-
essary to register IP addresses of the PCs to be
allowed to access the camera and determine their
access...")
36 Configure the settings relating to the host authentication [Host] Click the [Host] tab on the Authentication setup page. (page 16) The settings to restrict PCs (IP address) to access the camera can be configured on this page. [Host authentication] Select ON or OFF to determine whether or not to authenticate the host. Default:OFF Important: Before configuring the host authentication, it is nec- essary to register IP addresses of the PCs to be allowed to access the camera and determine their access...
Page 37
![Page 37
37
Configure the settings of the servers [Server setup]
The settings relating to the mail server and the FTP server can be configured on this page.
The Server setup page has 2 tabs of the [Mail] tab and the [FTP] tab.
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the Server setup page. (page 16)
The settings relating to the mail server used to send the alarm mail can be configured on this page.
[SMTP server address]*
Enter the IP address or the host name of the...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-36.png "Page 37
37
Configure the settings of the servers [Server setup]
The settings relating to the mail server and the FTP server can be configured on this page.
The Server setup page has 2 tabs of the [Mail] tab and the [FTP] tab.
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the Server setup page. (page 16)
The settings relating to the mail server used to send the alarm mail can be configured on this page.
[SMTP server address]*
Enter the IP address or the host name of the...")
37 Configure the settings of the servers [Server setup] The settings relating to the mail server and the FTP server can be configured on this page. The Server setup page has 2 tabs of the [Mail] tab and the [FTP] tab. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the Server setup page. (page 16) The settings relating to the mail server used to send the alarm mail can be configured on this page. [SMTP server address]* Enter the IP address or the host name of the...
Page 38
![Page 38
38
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the Server setup page. (page 16)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er.
Number of characters for the FTP server address:
1 - 128 characters
Important:
When entering the host name for FTP server
address, it is necessary to configure the DNS set-
tings on the [Network] tab of...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-37.png "Page 38
38
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the Server setup page. (page 16)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er.
Number of characters for the FTP server address:
1 - 128 characters
Important:
When entering the host name for FTP server
address, it is necessary to configure the DNS set-
tings on the [Network] tab of...")
38 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the Server setup page. (page 16) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP server address] Enter the IP address or the host name of the FTP serv- er. Number of characters for the FTP server address: 1 - 128 characters Important: When entering the host name for FTP server address, it is necessary to configure the DNS set- tings on the [Network] tab of...
Page 39
![Page 39
39
Configuring the network settings [Network setup]
The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management
Protocol) can be configured on this page.
The Network setup page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab.
Configure the network settings [Network]
Click the [Network] tab on the Network setup page. (page 16)
The following information is required to configure the network settings.
Contact the network...](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-38.png "Page 39
39
Configuring the network settings [Network setup]
The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management
Protocol) can be configured on this page.
The Network setup page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab.
Configure the network settings [Network]
Click the [Network] tab on the Network setup page. (page 16)
The following information is required to configure the network settings.
Contact the network...")
39 Configuring the network settings [Network setup] The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page. The Network setup page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab. Configure the network settings [Network] Click the [Network] tab on the Network setup page. (page 16) The following information is required to configure the network settings. Contact the network...
Page 40
![Page 40
40
[HTTP port]
Assign the port numbers independently.
The following port numbers are unavailable since they
are already in use.
Available port number:1 - 65535
Default:80
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161,
162, 995, 10669, 10670
[DNS]
Select AUTO or MANUAL to determine whether or
not to use the DNS. When MANUAL is selected, it is
necessary to configure the settings for the DNS.
When using the DHCP function, it is possible to obtain
the DNS address automatically by selecting AUTO....](http://img.usermanuals.tech/thumb/58/68508/w300_wv-np244_en_om_d-39.png "Page 40
40
[HTTP port]
Assign the port numbers independently.
The following port numbers are unavailable since they
are already in use.
Available port number:1 - 65535
Default:80
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161,
162, 995, 10669, 10670
[DNS]
Select AUTO or MANUAL to determine whether or
not to use the DNS. When MANUAL is selected, it is
necessary to configure the settings for the DNS.
When using the DHCP function, it is possible to obtain
the DNS address automatically by selecting AUTO....")
40 [HTTP port] Assign the port numbers independently. The following port numbers are unavailable since they are already in use. Available port number:1 - 65535 Default:80 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10669, 10670 [DNS] Select AUTO or MANUAL to determine whether or not to use the DNS. When MANUAL is selected, it is necessary to configure the settings for the DNS. When using the DHCP function, it is possible to obtain the DNS address automatically by selecting AUTO....