Panasonic Wireless Speaker System Sc-nt10 Owners Manual

VQT5A86PPC
Owner’s Manual
Wireless Speaker System
Model No. SC-NT10
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this 
manual for future use.
Register online at 
www.panasonic.com/register (U.S. customers only)
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)
Canada : 1-800-561-5505
until 
2013/07/03
SC-NT10_VQT5A86_eng.book  1 ページ  ２０１３年６月６日　木曜日　午後１２時２２分 

VQT5A862
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using 
the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with...

3VQT5A86
Turn off the power of this unit and wipe with dry soft 
cloth. Disconnect the USB cable when the USB cable 
is used.
• When it get very dirty, wipe off dirt with a cloth immersed in water and wrung strongly, and then 
wipe with dry soft cloth.
• Solvents such as benzine, thinner, alcohol, oil,  detergents, etc., may cause the external case to be 
altered or the coating may come off, so do not use 
them.
•  Before using chemically treated cloth, read the  instructions that came with the cloth...

VQT5A864
Table of contents
IMPORTANT SAFETY INSTRUCTIONS .................................................. 2
Precautions ............................................................................................... 2
Maintenance ............................................................................................. 3
Accessories .............................................................................................. 4
Control reference guide...

5VQT5A86
Control reference guide
5 41
23
678910
11
13 14
12
1 Terminal cover
2 Strap hole
3 AUX IN jack (
>11 )
4 DC IN terminal
5 RESET
• Use a paper clip, etc., to press the 
switch if this unit does not operate 
correctly, like when you cannot turn 
off/on the power.
6 Battery indicator (red) ( >7)• Indicates the battery status.
7 Bluetooth® indicator (blue)
8 Boost Mode indicator (orange)
9 Boost button ( >11 ) 10 Microphone (
>12)
11 Power on/off button [ Í/I]
• Press to switch the unit from on to...

VQT5A866
∫Cautions for using around 
water
Conform to following. Improper use may result in a 
malfunction.
• Securely close the terminal cover.
• Do not open or close the terminal cover with wet  hands or when water droplets are on this unit. Doing 
so may cause malfunction such as terminal rusting 
with the water droplets.
• Do not connect and use a USB cable or an audio  cable (not supplied).
• Do not pour soap water or detergent, or immerse in  water.
• Remove any hair, lint, sand, dust, etc., that...

7VQT5A86
This unit has a built-in battery. Please charge the battery before using this unit for the 
first time.
• If the battery level is low when this unit is turned on, the Battery indicator (red) (>5) blinks slowly.
∫ Charging the batter yConnect this unit with the power turned off and the PC with the power turned on using 
the USB cable (supplied).
If charging is necessary, the Battery indicator (red) lights. When charging is complete, 
the Battery indicator goes off.
*1Calculated by the test method...

VQT5A868
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth® 
feature of the device and plac e the device near this unit.
If you intend to use an NFC (Near Field Communication)-compatible 
Bluetooth
® device, proceed to “One-Touch Connection (Connecting by 
NFC)” ( >9).
For each Bluetooth
® device you want to connect to via Bluetooth®, perform 
pairing first. 
∫ Pairing with 
Bluetooth® device
1 Press [ Í/I] to turn this unit on.• The Bluetooth® indicator (blue)...

9VQT5A86
For NFC-compatible AndroidTM devices onlyBy simply touching this unit to an NFC (Near Field Communication)-compatible 
Bluetooth® device, this unit automatically turns on, and performs the starting 
operation, from pairing the Bluetooth® device to establishing a connection. 
Designed to skip the starting operation, this feature is very convenient.
About NFC (Near Field Communication) It is a short range wireless technology that makes use of interacting radio communications. 
Preparation
Turn on...

VQT5A8610
You can change the transmission speed to prioritize sound quality or 
connectivity.
• The default setting is “Sound Quality Priority MODE”. When the sound is interrupted, select  “Connectivity Pr iority MODE”.
1 Set either of the following modes.
∫Sound Quality Priority MODE: 
While pressing and holding [   ], press and hold 
[VOL -] until 
the Bluetooth® indicator (blue) and the Boost Mode indicator 
(orange) blink once.
∫ Connectivity Priority MODE: 
While pressing and holding 
[BOOST], press...