Panasonic Weather Band Receiver Cr W402u Operating Instructions

Operating Instructions
VOLUME/PUSHSEL
APM APM POWERPOWERBAND
BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
SQ
CLOCK
CR-W402U
CR-W402UPWR PWR
Heavy Duty Weather Band Receiver
CR-W402U
•Please read these instructions carefully before using this product and keep this manual for future reference.
R
CR_W402UOIeng_M  12/22/2005  12:31 PM  

CR-W402U
3
CR-W402U
2
Warning
Observe the following warnings when handling
this unit.❑The driver should not operate the system while
driving.Operating the system will distract the driver from looking
ahead of the vehicle and can cause accidents. Always stop
the vehicle in a safe location and use the parking brake
before operating the system.❑Use the proper power supply.This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this
product with other battery...

VOLUME/PUSHSEL
APMAPM POWERPOWERBAND
B AND
123456
TUNETUNE
SEEKSEEK
MUTE
DISPDISP
S
Q
CLOCK
CR-W402U CR-W402U PWRPWR
PWR
MUTE
DISPDISP
CR-W402U
5
CR-W402U
4ContentsSafety Information (Part 15 of the FCC Rules) . . . . . . . . . . . . . . . . Page 2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . 3❒Power and Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Power, volume, mute, display change, SQ (Sound Quality), audio...

VOLUME/PUSHSEL
APM APM POWERPOWERBAND BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
S
Q
CLOCK
CR-W402U CR-W402UPWR PWR
VOLUME/PUSHSEL
APM
APM POWERPOWERBAND
BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
S
Q
CLOCK
CR-W402U CR-W402UPWR PWR
MUTE
CR-W402U
7
CR-W402U
6
Audio Modes 
(Bass/Treble/Balance/Fader)
SQ (Sound Quality) 
SQ is a function that can call up various sound types at the touch of
button in accordance with your listening music type.
Press 
[SQ]
for more than 2 seconds to select the sound type...

VOLUME/PUSHSEL
APM APM POWERPOWERBAND BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
S
Q
CLOCK
CR-W402U CR-W402UPWR PWR
BAND BANDTUNE
SEEK
VOLUME/PUSHSEL
APM APM POWERPOWERBAND
BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
SQ
CLOCK
CR-W402U
CR-W402UPWR PWR
TUNE
SEEK
DISP
CR-W402U
9
CR-W402U
8
Radio
Seek TuningPress and hold for more than 0.5 seconds and release it.[}
TUNE]
: Higher frequency
[{
TUNE]
: Lower frequency
Tuning will automatically stop when the next broadcast
station is received.FM stereo...

VOLUME/PUSHSEL
APM APM POWERPOWERBAND
BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
SQ
CLOCK
CR-W402U
CR-W402UPWR PWR123456
VOLUME/PUSHSEL
APM
APM POWERPOWERBAND BAND
123456
TUNE
TUNE
SEEK SEEK
MUTE
DISPDISP
SQ
CLOCK
CR-W402U
CR-W402UPWR PWR
BAND
123456
CR-W402U
11
CR-W402U
10
Tuning in a Weather Band Station• Press 
[BAND](APM)
to select WB (Weather Band). (
a
page 9)
• Press any of the buttons 
[1]
to [6]
to monitor the preset station.
Weather Band StationsNational Weather Radio Broadcasts from over...

CR-W402U
13
CR-W402U
12
Much noise in FM stereo
and monaural broad-
casts.
Trouble
Station is too far, or signals are too weak.a
Select other stations of higher signal level.
The radio antenna is not extended enough.a
Extend fully the radio antenna.
Preset station is reset.
Battery cable is not correctly connected.a
Connect the battery cable to the terminal that is always active.
Cause/Step
❐
Radio
Troubleshooting Preliminary StepsCheck and take steps as described in the tables below.If You Suspect...

CR-W402U
15
CR-W402U
14Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Care of the Unit
❐
Cleaning this Unit
Use a dry, soft cloth to wipe.
❐
Caution on Cleaning
Never use solvents such as benzine, thinner as they
may mar the surface of the unit.
MaintenanceSpeaker ConnectionsCaution:
Please follow the instructions given below.  Failure to do so will cause damage to the unit and...

CR-W402U
17
CR-W402U
16❐
Preparation
❐
Installation Hardware
Warning:
If your vehicle is equipped with air bag
and/or anti-theft systems, specific procedures may
be required for connection and disconnection of the
battery to install this product.
Before attempting installation of this electronic
component, contact your vehicle dealer or
manufacturer to determine the required procedure
and strictly follow their instructions. 
FAILURE TO FOLLOW THE PROCEDURE MAY
RESULT IN THE UNINTENDED DEPLOYMENT OF
AIR...

CR-W402U
19
CR-W402U
18Electrical Connections
Cautions:• This wiring information is for experienced technical individual, for safety reason, please your dealer wire this
connection.
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the...