Panasonic VT50 Series Tv User Manual

Support / FAQ
FAQ
Networking
QuestionsAnswers
How  do I get VIERA
Connect to work on my TV?1. You need a broadband (high speed) Internet service
with a speed of no less than  1.5 Mbps.
2. Connect the TV to the Internet through your  router
by an Ethernet cable or a Panasonic Wireless LAN
(built-in).
3. Run the Connection test
, under the Network
menu. If Connection test fails, then  check with your
Internet service provider or router/modem
manufacturer if there are  firewall, content filter or
proxy...

Support / FAQ
FAQ
Software update
QuestionsAnswers
How  do I check for the latest
software (firmware) version
for my TV?
In the main menu, select Network . Select
Software  update . The current version and latest
version software will be shown. If software update is
grayed out, the TV is not connected to the Internet. If a
newer version is available, update your  TV. Follow the
on screen  instructions, do not power off the TV until
the update is complete. Be patient; firmware update
may take a while.
How...

Support / FAQ
FAQ
3D  - Viewing
QuestionsAnswers
Why doesnt  my 3D video
source  look 3D?1. Begin playing the 3D video source.
2. Ensure that the Panasonic 3D Eyewear (glasses)
are  on.
3. Press 
3D
 button directly or press  VIERA
TOOLS  button and select 3D .
4. In the 3D  format select  menu, select 3D.
Notes:
1. 3D Blu -ray discs must be played  with a 3D capable
Blu -ray player.
2. Check with your  Cable or Satellite provider to make
sure  their  supplied box is 3D capable.
3. 3D signal must be...

Support / FAQ
FAQ
3D  - Format
QuestionsAnswers
When selecting  some  3D
Video content, why are  there
two pictures  next to each
other?
There are  a few different 3D formats and the
current setting  may not match the incoming  3D signal.
The format should  change automatically, but
depending on the source/connection it may not signal
the TV properly. To manually  select other 3D formats:
1. Press 
3D  button directly or press  VIERA
TOOLS  
button on the TVs remote control  and select 3D
2. In the 3D...

Support / FAQ
FAQ
Other
QuestionsAnswers
What is the easiest and best
way to connect  a High-
Definition Cable or Satellite
box to the TV?
Use an HDMI cable. It carries  both  digital video and
audio  signal in HD. HDMI cable is the only cable
needed to connect  an HD  device to the TV.
Why does the 
CC  button
not display Closed caption?When viewing TV via an HDMI connected device,
such as a Cable or Satellite box, CC  must be enabled
on the device.
Closed caption is available  only at supported  TV...

Support / FAQ
FAQ
Menu  - Gray-out
QuestionsAnswers
Why is the ANT/Cable
option at the top of the
Input select  menu
grayed-out and unable  to be
selected?
During   First time  setup , you indicated  in
ANT/Cable setup  that you are  using Cable or
Satellite box and the box is connected to one of the
TVs AV inputs.  In this case, the Antenna/Cable input
is deactivated to prevent unintentional switching into
unused tuner. To re-activate, press  
MENU , select
Setup  and repeat First time  setup .
Some...

Support / FAQ
FAQ
Reset to default
QuestionsAnswers
How  do I reset my TV to all
factory  defaults  and
settings ?
In the main menu, select Setup . Highlight Reset
to defaults  and press  
. Enter your  password (if
created earlier) or create a temporary  new password.
Select  Yes to reset the TV.
207  

Support / FAQ
Care and Cleaning
Display panel
First, unplug the Power  cord  plug from the wall outlet.
Display panel
The front  of the display panel  has been specially treated. Wipe the panel  surface
gently using only a cleaning cloth or a soft, lint-free cloth.
If the surface is particularly dirty, after  cleaning up the dust, soak a soft, lint-free
cloth in diluted  mild liquid dish soap (1 part mild liquid dish soap diluted  by 100
times the amount of water) and then  wring the cloth to remove...

Support / FAQ
Care and Cleaning
Cabinet
First, unplug the Power  cord  plug from the wall outlet.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and
then  wring the cloth dry. Use this cloth to wipe the cabinet and then  wipe it dry with
a dry cloth.
Do not allow any mild liquid dish soap to come  into direct  contact with the surface
of the TV. If water  droplets get inside the unit, operating...

Support / FAQ
Care and Cleaning
Pedestal  /  Power cord
First, unplug the Power  cord  plug from the wall outlet.
Pedestal
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using
a cloth soaked with water  to which a small amount of mild liquid dish soap has
been added and then  wipe with a dry cloth. Do not use products such as solvents,
thinner, or household wax for cleaning,  as they can damage the surface coating.  (If
using a chemically-treated cloth,...