Panasonic Video Multiplexer Wj Fs216 Operating Instructions

							-18-
Playback Picture
of CH 1Playback Picture
of CH 2
Playback Picture
of CH 3Playback Picture
of CH 4
Playback Picture
of CH 5Playback Picture
of CH 6
Playback Picture
of CH 7Playback Picture
of CH 8
Example of quad
playback picture sequence
C. Single Spot or Quad Playback Picture
Sequences
1. Repeat procedures A (Single Spot Picture) to moni-
tor a single spot playback picture or procedures B
(Multi Spot Picture) to monitor quad playback pic-
tures.
Note:To monitor quad multi spot pictures, press
button 1 ( ). Sequential 3x3 and 4x4 play-
back pictures are not available.
2. Press the SEQUENCE/ALARM RESET button for
sequential display of playback pictures.
Note:Sequential pictures appear in the last select-
ed mode.
Sequential single spot pictures are displayed
on a single picture screen, and sequential quad
pictures on a quad screen.
Playback Picture of CH 3
Playback Picture of CH 6Example of single spot 
playback picture sequence
3. To cancel sequential picture display, press the
desired camera selection button.
The selected playback picture appears on the sin-
gle picture screen of the monitor.
SEQENCE
ALARM RESET
D. Still Playback Picture
1. Repeat procedures A (Single Spot Picture) or pro-
cedures B (Multi Spot Picture) to monitor playback
pictures.
2. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
3. Press button 16 (STILL ON). The STILL ON indicator
lights.
4. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
5. Press one of the camera selection buttons whose
indicator is lit.
The LED on the pressed button starts blinking, and
the picture corresponding to that button appears
still on the monitor.
The word STILL appears blinking on the monitor
screen.
STILL ON
16
ENTRANCE
Normal Playback Picture
STILL
Still Picture (The word  STILL blinks)
Normal Playback Picture
ENTRANCE
Still Picture (The word STILL blinks)
STILL 
						

							-19-
Note:Two or more pictures on the monitor can be
selected in multi picture mode.
6. Press the camera selection button whose indicator
is blinking.
The selected picture is displayed again for normal
monitoring.
7. To release STILL ON mode, set the MODE SELECT/
CAMERA SELECT switch to MODE SELECT, then
press button 16 (STILL ON).
The STILL ON indicator goes out.
Notes:
• If you press the camera selection button for a cam-
era whose picture is not displayed on the monitor
screen, the operation is ignored.
• The word “STILL” is not displayed if STILL/ALARM
DISP in MENU 2 OF 3 is set to OFF.
• While the still picture is displayed, the VTR keeps
playing the playback picture.
E. Single Spot Picture Zoom
The following function is available in single spot pic-
ture mode only.
1. Repeat procedures A (Single Spot Picture) to moni-
tor the playback picture.
2. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
3. Press the ZOOM/MULTISCREEN/QUAD SHIFT
button.
The “+” sign appears in the picture.
Note:The “+” sign disappears if no operation is
performed within approx. 5 seconds.
4. Press button 14 (+) to zoom in, or button 13 (–) to
zoom out.
Notes:
• Each time button 14 (+) is pressed, the picture
is zoomed in.  Zooming stops when it reaches
the maximum level.
• The picture cannot be zoomed out to be small-
er than the original size by pressing button 13
(–).
5. To move the picture, press buttons 9 - 12 (D
D, C
C,
A A, B
B).  The zoomed picture will move up, down,
left, or right depending on the button pressed.
The picture will stop at the edge of the monitor
screen.
Normal Playback Picture
Playback Picture with the + sign
Zoomed Playback Picture
ENTRANCE
Notes:
• In monitoring single spot playback pictures, only
one zoom level is available.
• The title in the picture disappears when the
ZOOM/MULTISCREEN/QUAD SHIFT button is
pressed.  The title remains off the screen even after
the “+”
• sign disappears.
To call the title back on the screen, quit the zoom
function and operate another function. 
						

							-20-
MULTISCR Mode
Select this mode to monitor the camera pictures.
Selection of MULTISCR mode permits the following
operations.
Monitoring the camera picture
A. Single Spot Picture
Proceed as described in “Monitoring the Camera
Picture, A. Single Spot Picture” on page 15.
B. Multi Spot Picture
1. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
2. Press the ZOOM/MULTISCREEN/QUAD SHIFT but-
ton. The multiscreen appears on the monitor.
3. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
4. Press button 1 ( ), 2 ( ), or 3 ( ) to select
multiscreen pattern (quad, 3x3, or 4x4).
Notes:
• Some frames are skipped as the picture seg-
ments are displayed.
• Multi spot pictures being monitored may some-
times vibrate vertically, but this does not indi-
cate a malfunction.
• Quad shift is available by pressing the ZOOM/
MULTISCREEN/QUAD SHIFT button. Refer to
page 17 for more details.
Quad
3 x 3
4 x 4
12
34
123
456
789
1256
3478
9 101314
11 12 15 16
C. Single Spot or Quad Picture Sequences
You can monitor sequential spot pictures or quad
pictures.  First select a display pattern.
To monitor sequential single spot pictures, take the
same steps as described in procedures B for
“Single Spot Picture Sequences of Monitoring
Camera Pictures“ on page 15.
To monitor sequential quad pictures, proceed as
described in the following procedures.
1. Take steps 1 to 3 of Procedures B for Multi Spot
Pictures.
2. Press button 1 ( ) to select quad pictures.
3. Press the SEQUENCE/ALARM RESET button.  The
quad pictures appear sequentially in the order of
dwell times set in the SEQUENCE SETUP in MENU
3 OF 3.
Camera 1
PictureCamera 2
Picture
Camera 5
PictureCamera 6
Picture
Example of quad picture sequence
Camera 8
PictureCamera 10
Picture
Camera 12
PictureCamera 16
Picture
4. To cancel sequential picture display, press the
desired camera selection button.  The selected
camera picture appears on the single picture
screen of the monitor. 
						

							-21-
Notes:
• If you press the camera selection button for a
camera whose picture is not displayed on the
monitor screen, the operation is ignored.
• The word “STILL” is not displayed if STILL/
ALARM DISP in MENU 2 OF 3 is set to OFF.
D. Still Multi Spot Picture
The following function is available in multi spot
picture mode only.
1. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
2. Press the (STILL ON) button 16.  The STILL ON indi-
cator lights.
3. Set the MODE SELECT/CAMERA SELECT to CAM-
ERA SELECT.
4. Press one of the camera selection buttons whose
indicator is lit.
The LED on the pressed button starts blinking and
the picture corresponding to that button appears
still on the monitor.
The word STILL appears blinking on the monitor
screen.
5. Press the camera selection button whose indicator
is blinking.
The selected picture is displayed again for normal
monitoring.
6. To release STILL ON mode, set the MODE SELECT/
CAMERA SELECT switch to MODE SELECT, then
press button 16 (STILL ON).
The STILL ON indicator goes out.
Normal Camera Picture
ENTRANCE
Still Picture
(The word STILL blinks)
STILL
Normal Camera Picture
Picture with the + sign
Zoomed Picture
ENTRANCE
E. Zoomed Multi Spot Picture
The following function is available in multi spot
picture mode only.
1. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
2. Press the ZOOM/MULTISCREEN/QUAD SHIFT
button. The “+” sign appears in the picture.
Note:The “+” sign disappears if no operation takes
place within approx. 5 seconds.
3. Move the “+” sign to the picture you want to zoom
by pressing buttons 9-12 (D
D, C
C, A
A, B
B).
4. Press button 14 (+) to zoom in. To zoom out, press
button 13 (-).
Notes:
• Each time button 14 (+) is pressed, the picture
is zoomed in. Zooming stops when it reaches
the maximum level.
• The picture cannot be zoomed out to be smaller
than the original size by pressing button 13 (–).
5. To move the picture, press buttons 9 - 12 (D
D,
C C, A
A, B
B).  The zoomed picture will move up,
down, left, or right depending on the button
pressed.  The picture will stop at the edge of
the monitor screen.
Notes:
• When you change the multiscreen pattern (for
example, quad to 3x3), the size of the zoomed pic-
ture is not the same even if the picture is from the
same channel.
• The title in the picture disappears when the
ZOOM/MULTISCREEN/QUAD SHIFT button is
pressed.  The title remains off the screen even after
the “+”• sign disappears.
To call the title back on the screen, quit the zoom
function and operate another function. 
						

							-22-
nRefer to the operating instructions of each system component for connection and operation.
CAMERA
IN
CAMERA
OUTPLAY IN    MONITOR OUT
ALARM/REMOTE
CAMERA
SW  IN
SIGNAL
GND
16 15 14
1312 11 10 98
654 3
21 7
16 15 1413
12 11 10 9 86
5432
1 7
REC OUT
Cameras Cameras
Camera Drive Unit
VIDEO OUTPUT
VIDEO OUTPUTVideo Monitor
VIDEO INPUT
VIDEO INPUT VIDEO OUTPUT
CAMERA SWITCH
Time Lapse VTRCameras
Note:The WV-80 cannot be used in this system.
CONNECTION 
						

							-23-


Sensor 16       Sensor  1

Buzzer
NO
C NC 

To  Buzzer
Relay
+24V
NC: Normally Closed Contact
NO: Normally Open Contact
C:    Common

• Connection with the Alarm Sensor
You can connect an alarm sensor to record the pic-
tures of channels that receive alarm input signal.
Use an alarm sensor that meets the following con-
ditions:
1. The power capacity must be less than 5 V DC
(open collector output or normally open con-
tact).
2. The voltage between the alarm connector and
the ground terminal must be 0-0.8 V when con-
tact is made.
Connect the sensor switch and the alarm input con-
nector.
Note:
Leave connector pin 23 blank.
• Connection with the Alarm Output Connector
Power capacity of alarm output connector less than
100 mA:
• Make sure to match the polarity when connect-
ing the buzzer to the alarm output connector.
• Connect the positive pole (+) of the buzzer to
pin 24 of the alarm output connector.Power capacity of alarm output connector more
than 100 mA:
• Connect the buzzer through a relay circuit to
pin 24 of the alarm output connector.  Do not
connect it directly. 
						

							-24-
nConnection with the Time Lapse VTR
Connect the time lapse VTR as shown in the example below.
246810121416
ALARM
IN 1
COM2ALARM
RESET IN 3
ALARMRECOVER OUT4
ALARM
OUT 5
1 SHOT IN6
7TAPE END
OUT8
WARNING
OUT 9
HUMID OUT10
REC OUT 11REC REVIEW
OUT12
SERIES
REC IN 13
14TIME
ADJUST IN 15
TIME
ADJUST OUT16 COMSERIES
REC OUT
13579111315
PLAY IN
ALARM/REMOTECAMERA
SW  INREC OUT131
14 25
Video Multiplexer
WJ-FS216
VIDEO INVIDEO OUTS-VIDEO
AUDIOCAMERA
SW OUTGND
24 22
147
Time Lapse VTR 
						

							-25-
• Remote Control
You can control the SEQUENCE, MULTISCREEN/QUAD SHIFT, and the camera selection buttons from a remote con-
troller.  These functions are activated by contact with the ground terminal (open collector output or normally open con-
tact).
• Connect the ALARM/REMOTE connector (pin 23) to the ground terminal as shown below.  Switches 1 - 16 select the
cameras (they do not control the alarm input).
Notes:
• Any two or more switches closed at the same time will cause this unit to malfunction.
• SEQUENCE is assigned to switch 17 and MULTISCREEN/QUAD SHIFT to switch 18.
• When no operation is taking place, all switches except switch 19 must be open as shown below.
15161413121110987654321171819SwitchSwitch
GROUNDSEQUENCE MULTISCREEN
/QUAD SHIFTSwitch
Camera Selection
D-SUB CONNECTOR
(MALE) 
						

							-26-
Power Source: 220 - 240 V AC 50 Hz
Power Consumption: 12 W
Camera Input: 16 (BNC) 2:1 interlaced VBS 1.0V[p-p]/75 W automatic termination/looping through
Playback Input: 1 (BNC) VBS 1.0V[p-p]/75 W
Monitor Output: 1 (BNC) VBS 1.0V[p-p]/75 W
Recording Output: 1 (BNC) VBS 1.0V[p-p]/75 W
Camera Switching Input: 1 RCA pin jack
Alarm Input: 16
Alarm Output: 1 Open-collector 24V DC 100 mA max.
Alarm Recover Input: 1
Operating Temperature:-10°C - +50°C (14°F - 122°F)
Operating Humidity: Less than 90%
Dimensions: 420 (W) x 44 (H) x 350 (D) [16-9”(W) x 3-7/16(H) x 13-3/4”(D)]
Weight: 4 
kg(8.8 lbs)
Dimensions and weight are approximate.
Specifications are subject to change without notice.
STANDARD ACCESSORIES
Rack Mounting Angle  ...................................... 2 pcs.
Screws (M3 x 10) ............................................. 8 pcs.
Switch Protector  ................................................ 1 pc.
SPECIFICATIONS 
						

							Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-91, Japan
N0896-1117 YWV8QA4469BN Printed in JapanN30 Gedruckt in Japan
Imprimé au Japon
Impreso en Japón