Panasonic Video Intercom System Monitor Station Vl Gm301a Installation And Operation Guide

41
Setting monitor station or sub monitor station into groups (Default setting is “Group A”.)
Use this when you would like to separate monitor station or sub monitor station into
groups for use.
Menu setup
Press²MENU³.
( The “MENU (1/4)” screen will be displayed.)
1Cursor
2
Press²SELECT ()³to display the “MENU (3/4)”
 screen, and then move the cursor to
“GROUP SETUP”.
3
Press²MENU³.
( The “GROUP SETUP” screen will be displayed.)
5 4
Press²SELECT (
/)³to move the cursor to the group you would...

42
Menu setup
Selecting a camera (Default setting is for all cameras to be “ON”.)
This selects the camera (CAMERA1 or CAMERA2) to be used for each group.
Press²MENU³.
( The “MENU (1/4)” screen will be displayed.)
1Cursor
2
Pres²SELECT ()³to display the “MENU (3/4)”
screen, and then move the cursor to
“CAMERA SELECT”.
3
4
Press²SELECT (
/)³to move the cursor to the group you would like to select.
Press²MENU³.
( The “CAMERA SELECT” screen will be displayed.)
5
Press²MENU³.
( The “CAMERA SELECT”...

43
Menu setup
9
10
11
  To continue making further settings ...
 Move the cursor to the desired item, and press²MENU³.
 (Refer to step 5 on page 35.)
To complete the settings ...
Once you have selected the camera, press
²SELECT ()³to move the cursor to “BACK”.
Press²MENU³.
( The “MENU (3/4)” screen will be displayed.)
Press²SELECT ()³to return to the “MENU (4/4)”
screen, and then move the cursor to “MENU EXIT”
and press²MENU³.
7
Press²MENU³.
( The “CAMERA SELECT” screen will be...

44
Menu setup
Setting the talking method (Default setting is “PUSH-TO-TALK”.)
This sets the communication method for the monitor station or sub monitor station.
²SELECT (
) ³
²SELECT () ³
²MENU³
Press²MENU³.
( The “MENU (1/4)” screen will be displayed.)
1Cursor
2
3
5 4
Press²SELECT (
/)³to move the cursor to the communication method you
would like to select.
6 To continue making further settings ...Move the cursor to the desired item, and press²MENU³.
(Refer to step 5 on page 35.)
To...

45
Setting the alarm output time (Default setting is “10SEC.”)
This sets the length of time that a signal is output from the alarm output terminal.
(Page 14 : K1, K2)
Menu setup
Press²MENU³.
( The “MENU (1/4)” screen will be displayed.)
1Cursor
2
3
5
6
 To continue making further settings ...Move the cursor to the desired item, and press²MENU³.
(Refer to step 5 on page 35.)
To complete the settings ...
Press²SELECT ()³to return to the “MENU (4/4)”
screen, and then move the cursor to “MENU EXIT”...

46
Menu setup
Restoring settings to defaults
This returns all menu settings to their default settings.
2
Press²SELECT ()³to display the “MENU (4/4)”
screen, and then move the cursor to
“INITIALIZATION”.
Press²MENU³.
( The “INITIALIZATION” screen will be displayed.)
3
4
Press²SELECT ()³to move the cursor to “YES” or “NO”.
5Press²MENU³.
( The display will return to the “MENU (4/4)” screen.)
•If set to “YES”
–All settings will be returned to their default settings.
•If set to “NO”
–The settings...

47
Troubleshooting
Problem
•Strong light such as sunlight is shining into the
camera of the door station. Though this may cause
the display image to become difficult to see, it is not
a malfunction.
•Certain types of lighting (dusk, incandescent
lighting, etc.) may be shining into the camera.
We recommend lighting the area of the door station
with white, fluorescent light.
•The power cord is not connected. Check the
connections.
•Contact our service personnel. The display is not clear or is
blurry.•The...

48
Important information:
•Do not use anything containing alcohol, polish powder, powder soap, benzine,
thinner, wax, petroleum, or boiling water. Also do not spray with insecticide, glass
cleaner, or hair spray. This could cause a change in color or quality. Clean the unit with a soft, dry cloth when cleaning.
For excessive dirt, wipe the unit with a slightly damp cloth.
Cleaning
Help 

49
Technical data about this product
Note:
•Design and specifications are subject to change without notice.
•The pictures and illustrations in these instructions may vary slightly from the
actual product.
General Information
Monitor station
Power supply:
Current consumption:
Video Output Level:
Dimensions:
Mass (Weight):
Operating environment:
Installation method:
External material:
AC adaptor (Part number: PFAP1014)
Power supply:
Output voltage:
Output current:
Dimensions:
Mass (Weight):
Operating...

50