Home
>
Panasonic
>
Video Recorder
>
Panasonic Video Cassette Recorder Pvv4602 Operating Instructions
Panasonic Video Cassette Recorder Pvv4602 Operating Instructions
Have a look at the manual Panasonic Video Cassette Recorder Pvv4602 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Video Cassette Recorder
Operating Instructions
(Basic Operations)
For advanced operations, see the separate
“Advanced Operations” instruction book.
• Limited Warranty Guía para rápida consulta (Spanish Quick Use Guide)Limited Warranty
- 12 -
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America,
One Panasonic Way Secaucus, New Jersey 07094
PANASONIC VHS VCR
Limited Warranty
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively
referred to as “the Warrantor”) will repair or replace this product with new or refurbished
parts or equivalent product, free of charge in the USA or Puerto Rico, in the event of
a defect in materials or workmanship as follows (all time periods commence from the date
of the original purchase):
PARTS – ONE (1) YEAR
LABOR – NINETY (90) DAYS
Batteries – Non-rechargeable batteries are not warranted.Tape (if included) – New video tape in exchange for defective video tape for five (5) days.
For assistance in the continental U.S.A. in obtaining repairs please ship the product to:
Panasonic Services Company
Customer Servicenter Suite B
4900 George McVay Drive.
McAllen, TX 78503
In Puerto Rico contact the Panasonic Sales Company.
Tel. (787)750-4300
Fax. (787)768-2910
When shipping the unit carefully pack and send it prepaid, adequately insured and
preferably in the original carton. Include a letter detailing the complaint and provide a day
time phone number where you can be reached.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILLBE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATINGDATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVEDWITHOUT SUCH PROOF OF PURCHASE.
Also, the purchaser will be responsible for shipping the unit to the above address.
This warranty is extended only to the original purchaser.
Note This warranty only covers failures due to defects in materials and workmanship which
occur during normal use. The warranty does not cover damage which occurs in shipment,
or failures which are caused by products not supplied by the warrantor, or failures which
result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration,
modification, faulty installation, set-up adjustments, improper antenna, inadequate signal
pickup, improper insertion of consumables, maladjustment of consumer controls, improper
operation, power line surge, improper voltage supply, lightning damage, commercial use
such as hotel, office, restaurant, or other business or rental use of the product or service
by anyone other than a PANASONIC VHS VCR authorized repair facility, or damage that
is attributable to acts of God.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES) RESULTING
FROM THE USE OF THIS PRODUCTS, OR ARISING OUT OF ANY BREACH OF THE
WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,
ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above exclusions or
limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
If you have a problem with this product that is not handled to your satisfaction, then write
to the Consumer Affairs Department at the Company address indicated on this page.
For Product Information, Operating Assistance, Literature Request, Dealer
Locations, and all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm Saturday-Sunday 9 am-7 pm,
EST.
Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.
Accessory Purchases:
1-800-332-5368 (Customer Orders Only)
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc.
AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
- 11 -
Spanish Quick Use Guide/ Guía para rápida consultaSpanish Quick Use Guide/ Guía para rápida consulta Guía para rápida consulta (Spanish Quick Use Guide) Location of Controls (Multi Function Display, Rear View of the VCR)
- 10 -
OPERACIONES BÁSICAS PARA
LA REPRODUCCIÓN
Detalles especiales durante la grabación
Presione FF o REW para búsqueda de
escenas hacia delante/ hacia atrás.
Presione PLAY para liberar.
Luego de que la búsqueda se ha iniciado,
cada vez que presione FF o REW se
cambia la velocidad como sigue:
[SLP]aprox.21X
↔ ↔↔ ↔
↔aprox. 9X
[LP] aprox. 9X
↔ ↔↔ ↔
↔aprox. 7X
[SP] aprox. 7X
↔ ↔↔ ↔
↔aprox. 3X
Si la imágen se interrumpe con la velocidad de
21x, 9x o 7x, cambie la velocidad a 9x, 7x o 3x.
Presione PAUSE/SLOW para imagen
Fija (Congelada).
Presione PLAY para liberar.
Presione PAUSE/SLOW en el modo
de Imagen fija para imágenes cuadro a
cuadro. Presione PLAY para liberar.
Mantenga pulsado PAUSE/SLOW en
el modo de imagen fija para imágenes
en cámara lenta.
Presione PLAY para liberar.
Presione EJECT en el control remoto, o
STOP/EJECT en el VCR para expulsar
el cassette. Presione REW o FF en el modo de
parada para rebobinado/avance
rápido del cassette.
Grabación de un toque.
Presione REC repetidamente para ajustar la
duración de la grabación como sigue: como
sigue: 30 min.
➛ ➛➛ ➛
➛ 1 hr
➛ ➛➛ ➛
➛ 1:30hr
➛ ➛➛ ➛
➛ 2:00
➛ ➛➛ ➛
➛
3:00
➛ ➛➛ ➛
➛ 4:00
➛ ➛➛ ➛
➛ Salida.
La VCR se apagara automáticamente en en
intervalo seleccionado de tiempo.
1Inserte una cassette, la alimentación del VCR se activa.
En la Pantalla de Visualización Multi
Función se ilumina “VCR”.
2Presione PLAY para reproducir el
cassette.
Si el cassette no tiene lengüeta de
prevención de grabación (p. 3), se inicia la
reproducción automáticamente.
3Presione STOP para detener el
cassette.
OPERACIONES BÁSICAS PARA
LA GRABACIÓN
1Inserte el cassette con lengüeta de
protección de grabación (p. 3).
La alimentación del VCR se activa.
En la pantalla Multi Función se ilumina
“VCR”.
2Presione CH , o las teclas de
números para seleccionar el canal.
3Presione SPEED para seleccionar la
velocidad de grabación (p. 3)
SP = Reproducción estándar,
LP = Larga duración,
SLP = Superlarga duración.
4Presione REC para comenzar a grabar. Para eliminar escenas indeseadas,
presione PAUSE/SLOW para pausar, y al
presionar nuevamente se reanuda la
grabación.
5Presione STOP para detener la
grabación.
Ver un canal y grabar otro.
Presione VCR/TV.
(La indicación VCR se apagara en la
“visualización de Multi-Función”)
➛ ➛➛ ➛
➛Seleccione canales de TV (Mientras
permanece grabando)
Seleccione canales con VCR.
Presione VCR/TV (la indicación “VCR” se
encenderá en la vizualización multi-función)
➛ ➛➛ ➛
➛Seleccione canales en su VCR.
Spanish Quick Use Guide/ Guía para rápida consulta
- 9 -
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Indonesia
LSQT0534A
S1201-0
P
Rear View of the VCR
OUT
IN 1
OUT TO TVVIDEO
AUDIOIN FROM ANT.
VHF/UHF
R
L
VHF/UHF Antenna
Input Terminal
VHF/UHF Antenna
Output Terminal
Video Output
Connector AC Power Plug
While plugged into an AC
outlet, the VCR consumes
3.0 W of electrical power in
off condition.
Audio Output
Connector (L/R) Audio Input Connector
(L/R)Video Input Connector
Hi-Fi Indicator
Lights up when Hi-Fi audio is
monitored in Playback Mode.
VCR Indicator
Lights up when the
VCR/TV selector is
set to VCR.
Power Indicator
Lights up when power is on.
Clock/ Status/ Channel/ Speed Display
Displays the current time. Briefly displays VCR status
when a function button is pressed.
Briefly displays the channel number, or “L1” or “L2”
when a channel or line input is selected.
Briefly displays the recording speed when SPEED is
pressed.
Multi Function Display
Timer Indicator
Lights up when the VCR is set for a Timer
Recording, or when One Touch Recording
(OTR) is used.
Flashes when a Timer Recording is set, but a
tape has not been inserted into the VCR.
Location of Controls
- 8 -
LSQT0534A
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
PROGRAMACIÓN FÁCIL PARA LA
GRABACIÓN CON
TEMPORIZADOR
1 ) Presione PROG/VCR+.
2) Presione para
visualizar la pantalla
de Programación.1
Presione para seleccionar un
número que no está usando para
ingresar mas programas y presione
para ajustar. Luego repita el paso 2.
Presione nuevamente
PROG/VCR+ para salir. Presione PROG/VCR+ para finalizar
el programa.
Fecha de hoy
Orden para elegir
Ejemplo
2) Para los ajustar siguientes,
presione para seleccionar y
presione para ajustar los tiempos
de INICIO/PARADA, CANAL, o
entrada de LINEA, y velocidad del
cassette (SP, LP, SLP).
Presione POWER off para ajustar el
temporizador.
(Se ilumina “TIMER” en el panel delantero)
2
3
41) Para ajustar la FECHA de
grabación, presione para
seleccionar: 1-31 = una vez, o
DIARIO = a la misma
hora de lunes a viernes,
o SEMANA = a la
misma hora cada
semana y presione
para ajustar.
VCR Plus+ PROG. L I STA
7 SAB --:-- --:-- --HOY FECHA
I
N I C I O
PARADACA
SLP
ELEGIR
: SAL I R : PROG
DIARIO72
1
31
68 9
/ Orden para elegir
SEMANAL(SAB)SEMANAL(LUN)SEMANAL(DOM)
FE I N I C PARADA CA VEL7 2 : 00
2 : 00 P 3 : 20 P 02 SLP
02 SLP-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --CANCELAR: ADD / DLT ELEGIR : FIJAR :SAL I R : PROG
VCR Plus+ PROG. L I STA
VCR Plus+ PROG. L I STA
HOY FECHA
I
N I C I O
PARADACA
SLP7 SAB --:-- --:-- --HOY
ELEGIR FECHA DE I N I C I O
ELEGIR : FIJAR :
TERMINAR : PROG
a
b
c1 ) Presione PROG/VCR+.
2) Presione para
seleccionar la linea.
Presione
para
seleccionar programa
deseado.
Para reemplazar programa...
1) Presione
para
desplegar menu.
2) Repita paso 2 para
(ver arriba) introducir
el nuevo programa.
Para cancelar programas…
Presione ADD/DLT
dPresione PROG/VCR+ Para terminar
programacion.
FE I N I C PARADA CA VEL7 9 : 00 A 12 : 00 A 08 SP8 10 : 00 P 12 : 00 P 02 SP10 8 : 00 P 9 : 00 P 10 SPSU 9 : 00 P 10 : 00 P L1 LPCANCELAR: ADD / DLT ELEGIR : FIJAR :SAL I R : PROG
VCR Plus+ PROG. L I STA
FE I N I C PARADA CA VEL7 9 : 00 A 12 : 00 A 08 SP8 10 : 00 P 12 : 00 P 02 SP10 8 : 00 P 9 : 00 P 10 SPSU 9 : 00 P 10 : 00 P L1 LP
ELEGIR : SAL I R : PROG
VCR Plus+ PROG. L I STA
FECHA
I N I C I O
PARADACA
SLP
ELEGIR FECHA DE I N I C I O
7 SAB 9:00A 12:00A 08HOY
ELEGIR
: FIJAR :
TERMINAR : PROG
VCR Plus+ PROG. L I STA
FE I N I C PARADA CA VEL-- -- : -- -- : -- -- --8 10 : 00 P 12 : 00 P 02 SP10 8 : 00 P 9 : 00 P 10 SPSU 9 : 00 P 10 : 00 P L1 LPCANCELAR: ADD / DLT ELEGIR : FIJAR :SAL I R : PROG
VCR Plus+ PROG. L I STA
VCR
VHF/UHFEstuche convertidor
de TV por cable TelevisorTerminal
IN FROM ANT.
Entrada (IN) desde
ANT./CABLE
Terminal
OUT TO TV
Terminal IN FROM ANT.
TelevisorVCR
VHF/UHFTerminal
OUT TO TVEntrada (IN) desde
ANT./CABLE
Conecte el cable de la antena al
terminal IN FROM ANT del VCR.
Conecte el terminal OUT TO TV del
VCR a la entrada de la antena VHF/UHF
del TV con el cable RF incuido.
Para Ant/Cable ➛ ➛ ➛ ➛
➛ VCR ➛ ➛ ➛ ➛
➛ TV
Para Sistema Digital de Satelite (DSS)/ Convertidor de cable ➛ ➛ ➛ ➛
➛ VCR ➛ ➛ ➛ ➛
➛ TV
Conecte la salida de convertidor de
cable al terminal IN FROM ANT.
Conecte el terminal OUT TO TV del
VCR a la entrada de la antena VHF/
UHF del TV con el cable RF incluido.
1
2
1
2
Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA.
La videograbadora iniciará automáticamente la fijación de los canales y del reloj al enchufar el
cable de CA.
2
1
2
1
CONEXIONES/CONFIGURACIÓN INICIAL (READY TO PLAY)
PRECAUCION
Si se sobre ajusta “NUT TYPE” el cable coaxial RF podria dañar las
terminales de conexion. Ajusta ligeramente utiliza solo los dedos.
1Encienda el TV y cambie al canal 3.
2Enchufe el cable de CA.
La videograbadora se encenderá e
iniciará las fijaciones de los canales y
del reloj.
Si no aparece la pantalla de abajo,
compruebe la conexión del VCR-TV y si el
canal del TV está a 3, intennte cambiando
al canal 4.
Para cambiar el canal de salida del VCR,
consulte las instrucciones de “Canal de
salida del VCR” en la página 12 de las
operaciones avanzadas.
Si está usanndo un convertidor de TV por
cable y en su area hay un canal de Public
Broadcast Station (PBS), ajuste su convertidor
al canal PBS de su area. Si está usando un
receptor DSS, este debe estar apagado.
3Las fijaciones se realizan
automáticamente. Cuando termina llas
fijaciones, aparecerá la siguiente pantalla.Si aparece en la pantalla “FIJACION
AUTOMATICA DEL RELOJ ES
INCOMPLETO”, Ajuste el reloj como se
describe a continuación.
Enchufe el cable de CA.
4SELECCION DE CONEXION en el
menu desplegado en pantalla.
(Si la conexion es ANT/ CABLE➛ ➛➛ ➛
➛VCR➛ ➛➛ ➛
➛TV.)
Presione para obtener las
conexiones “VCR TV”, o
“VCR CABLE/DSS TV”, y presione seleccionar.
(Si la conexion es DSS/Convertidor decable➛ ➛➛ ➛
➛VCR➛ ➛➛ ➛
➛TV.)
Presione
para obtener la
conexion “CABLE/DSS VCR TV”
y presione para seleccionar.
Confirme el canal de salida de su
convertidor de cable o receptor de
DSS presione
que permitiran
selecionar el mismo canal de salida
que su convertidor o DSS.
Presione
para seleccion.
AJUSTE MANUAL DEL RELOJ
Si la colocacion de tiempo fue incompleta.
aPresione la tecla ACTION en el
control remoto para visualizar la
pantalla del menú RELOJ.
bPresione para seleccionar el mes
y para ajustar. De la misma forma,
seleccione y ajuste la fecha, año,
hora y DST (Hora de Verano).
cPresione dos veces la tecla ACTION
para poner el RELOJ en marcha y pase
al paso 4 anterior.
FIJACION AUTOMATICA
DEL
RELOJ EN PROCESO
CANCELAR : STOP
9 /29 / 20 0 2 DOM 2 : 20PMHORA VERANIEGA : ACT
CANAL F I JADO : CA 10
FIJACION AUTOMATICA
COMPLETO
VCR RELOJ CANALFIJACION AUTOMATICA
DEL RELOJ ES INCOMPLETO
POR FAVOR FIJE EL RELOJ
CON LA TECLA ACTION
VCR CLOCK CHANNEL
ELEGIR LA CONEXION
VCR TVCABLE / DSS VCR TV
VCR CABLE / DSS TV
VCR RELOJ CANAL
SALIDA DEL CABLE/DSSCA 0 1
ELEGIR LA CONEXIONCABLE / DSS VCR TV
VCR RELOJ CANAL
ELEGIR LA CONEXION
VCR TVCABLE / DSS VCR TV
VCR CABLE / DSS TV
VCR RELOJ CANAL
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
Table of Contents
Important Safeguards and Precautions .................... 2
Before Using ............................................................ 3
Connections and Initial Setup (Ready to Play) ......... 4
Playback / Record on a Tape ................................... 5
Timer Recording ....................................................... 6
Location of Controls ............................................. 7, 8
Spanish (Español) Quick Use Guide ............ 9, 10, 11
Limited Warranty .................................................... 12
Model No. PV-V4602
Note to CABLE system installer:
This reminder is provided to call the CABLE system installer’s
attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical Code in Canada) that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
As an ENERGY STAR® Partner, Matsushita Electric Corporation
of America has determined that this product or product model
meets the ENERGY STAR
® guidelines for energy efficiency. VCR Plus+, A
LLSET and PlusCode are trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufactured
under license from Gemstar Development Corporation.
VCR RELOJ CANAL
FIJACION ES COMPLETO
VERANO VERANO : ACT
ACT9 /29 / 20 0 2 DOM 2 : 20PM
F I J A R : I N I C I AR : ACT I ON
VCR RELOJ CANAL
ELEGIR MES
VERANO : ACT1 / /:
ELEGIR : FIJAR :
SALIR : ACT I ON
- 11 -
Si no puede resolver su problema, por favor comunicarse al Centro de
llamadas del Cliente para asistencia del producto al 1-800-211-PANA(7262).
Para localizar un centro de servicios autorizado, llame sin costo al
1-800-211-PANA(7262) o envie un correo a : [email protected]
ANTES DE AL SERVICIO SOPORTE TÉCNICO
ALIMENTACIÓN DE AC
La unidad no enciende….
GRABACIÓN Y REPRODUCCIÓN
(REC / PLAY)
No se pueden grabar programas de TV
No se puede efectuar grabación con
temporizador…
No hay imagen de reproducción, o
la imagen de reproducción tiene
ruidos o contiene rayas...
En la reproducción de efectos
especiales, la imagen puede contener
algunos saltos verticales cuando se
utiliza un televisor con Control de
Bloqueo Vertical Automático...
No se puede controlar el VCR...
Verifique los siguientes puntos una y otra ves si esta teniendo problemas con su VCR.
(BO : Haga referencia en la instruciones de funcionamiento [Operaciones Básicas])
(AO : Haga referecncia el la instruciones de funcionamiento [Operaciones Avanzadas])
CORRECCIÓN
Revise que el cordon de alimentación de AC este correctamente
conectado a la toma de pared.
Presione el botón “POWER” para el encendido de la unidad.
Verifique que la fuente de alimantación está activada.
Varios
No se pueden ver los programas en
el televisor...
No se puede introducir la cassette
de vídeo...
No se puede extraer la cassette de
vídeo...
La cassette de vídeo es expulsada al
dar comienzo a una grabación o al
desactivar la alimentación para la
grabación con teporizador...
En el modo de Detención, el motor
(CILINDRO) sigue girando...
CONTROL REMOTO
NO funciona el control remoto...
Los botones “ACTION” y/o
“PROG/VCR+” no responden...
CORRECCIÓN
Revise las conexiones entre VCR, antena externa o cable y TV.
Verifique la selección de conexiones (BO p. 4, AO p. 3)
Verifique que su sistema de antenna (Cable o TV) estén
correctamente seleccionados. Vea “Channels” (AO p. 12).
Asegúrese que la pestaña en el cassette de grabación esté
intacta (BO p.3).
Compruebe que el reloj ha sido ajustado a la hora y fecha actual.
Asegúrese de que la caja de Cable/DSS (si se utiliza) se
deja encendido y está sintonizado al canal a grabar.
Ajuste las horas de comienzo y deteción de grabación
correctamente. (BO p. 6)
Asegúrese de que ha apagado el VCR antes de la grabación.
(BO p. 6)
La grabación con temporizador quizás no pueda realizarse o
continuarse si se produjera una interrupción de corriente antes
o durante una grabación con temporizador, incluso después de
restablecido el fluido eléctrico.
Seleccióne el canal 3 o 4 en el televisor, de modo que
corresponda con el canal de salida del videograbador (3 o 4)
(BO p. 4), o seleccione LINE.
Ajuste el selector VCR/TV a “VCR”.
Ajuste el control TRACKING en una de las dos direcciones. (BO p. 3)
Pruebe a realizar la limpieza de cabezales. (BO p. 3)
Ponga el Control de Bloqueo Vertical del televisor en “MANUAL”
y luego realice el ajuste.
Asegúrese de que el aparato está encendido.
Revise las pilas del control remoto.
Asegúrese de que el BLOQUEO DEL VCR esté ajustado a
INACTIVO (AO pag.10)
Asegúrese de que no está funcionando una grabación con
temporizador.
CORRECCIÓN
Asegúrese de que el aparato está encendido.
Asegúrese de que el control remoto está en le modo de VCR.
Apunte el control remoto derectamente al sensor remoto del
VCR. (BO p. 7)
Evite que ningún objeto interrumpa la señal del control remoto.
Revise las pilas del control remoto (BO p.3)
Asegúrese de que el BLOQUEO DEL VCR esté ajustado a
INACTIVO (AO pag.10)
Si ei sensor remoto recive directamente la lus del fluorescente o luz
solar puede causar interferencia con la señal del control remoto.
Verifique las conexiones entre VCR, cable o antena y TV.
Presione el botón VCR para el modo de “VCR”. (AO p. 2)
Revise las baterias del control remoto. (BO p. 3)
CORRECCIÓN
Asegúrese que la TV este encendida.
Asegúrese que la TV esté conectado a la salida de la VCR
(VCR Out).
Verifique conexiones entre VCR,cable o antena y TV.
Ajuste el selector VCR/TV a “TV”. (BO p. 5)
Asegúrese que la apropiada señal fue seleccionada.
Inserte el cassette con el lado de la ventana hacia arriba y la
pestaña de grabación frente a usted.
Verifique que no tenga ningún cassette dentro del aparato.
Inserte o conecte completamente el cable de alimentación de
AC a la toma de pared.
Asegúrese que la pestaña de grabación del cassette este
intacta. (BO p. 3)
Para activar rápidamente el mecanismo de reproducción, el
cilindro sigue rotando durannte 3 minutos. Esto disminuye el
tiempo de respuesta desde la parada hasta la reroducción o
hasta la el modo de búsqueda en rebobinado.
REVISIÓN, REEMPLAZO O
BORRADO DE PROGRAMACIONES
(no se puede efectuar durante la grabación)
PARA CANCELAR LA GRABACIÓN
CON TEMPORIZADOR
(la grabación está teniendo lugar)
Presione POWER y luego STOP dentro de
los 10 segundos para cancelar la grabación
con temporizador (el indicador TIMER se
apagará en la Pantalla de Multi-Función)
CONEXIONES
CONFIGURACIÓN INICIAL
FIJACION AUTOMATICA
DEL
RELOJ EN PROCESO
CANCELAR : STOP
AUTOPROGRAMACION
EN PROCESO
CANCELAR : STOP
• Timer Recording Location of Controls (Remote Control Buttons, Front View of the VCR)Location of Controls
- 7 -
Timer Recording
11) Press PROG/VCR+* button.
2) Press
to display program screen.
Press PROG/VCR+ button to end programming.
2
2) Set remaining items,
press to select and
press to set START/ STOP times,
CH(channel) or LINE input (p. 9 of “Advanced Operations” book),
and tape speed (p. 3). 1) Set record DATE,
press
to select:
1~31= one time,
or DAILY= MON~ FRI,
or WEEKLY= same time
each week and press
.
3To Enter More Programs
Press to select and
press
to set an unused program.
Then repeat step 2.
Or, press PROG/VCR+ button to exit.
Timer Recording
Example
Today
Press to select
desired program.
4Press POWER off to set the timer Recording. (“TIMER” lights on Multi Function
Display.)
(Recording is not in progress)
a1) Press PROG/VCR+ button.
2) Press
to select LIST.
b
c
To Replace program...
dPress PROG/VCR+ button to end the
program.
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
be set to the Cable Box output channel and your Cable Box must be manually set to
the desired channel. The Cable Box must be left on.
If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears
on-screen, please reenter the timer programs.
Important notes when using DSS receiver
When recording programs via DSS receiver, DSS receiver must be left on.
When recording programs via an antenna or cable, DSS receiver must be turned off.
Review, Replace, or Clear Program
1) Press to display.
2)Repeat Step 2
(above) to set new
programs.
Press ADD/DLT.
or
To Clear program...
Press POWER and then STOP within 10
seconds to cancel the Timer Recording.
(The TIMER indicator goes out on Multi
Function Display.)
Cancel a Timer Recording
(Recording is in progress)
- 6 -
Notes
DAILY72 1 31
68 9
SELECT / Selection Order
WEEKLY
(SAT)WEEKLY
(MON)WEEKLY
(SUN)
Connections Initial Setup Clock Set Select Channel Playback Record Auto Operation
This video recorder, equipped with
HQ (High Quality) system, is
compatible with existing VHS
equipment. Only use tapes with the
mark. Only tapes tested and
inspected for use in 2, 4, 6, and 8
hour machines are recommended.
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 5 -
1Insert a tape with a record tab (p. 3).1Insert a tape.
Special Features During Play
2Press CH or NUMBER keys
to select the channel. For “LINE” input, see p. 9 of “Advanced
Operations” book.
If channel over 100, first press 100 key
then the other 2 digits.
3Press SPEED
to select record speed (p. 3).
4Press REC
to start recording.
To edit, press PAUSE/SLOW to pause,
and again to resume recording.
5Press STOP to stop recording.
2Press PLAY to play tape. If tape has no rec. tab (p. 3), auto play begins.
One Touch Recording
(record in progress)
Press REC repeatedly to set length as follows:
30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00➛ 4:00 ➛ exit.
The VCR shuts off at the length set.
Record one station, watch anotherPress VCR/TV
(“VCR” goes out on Multi Function Display),
➛ select channels at TV (recording continues).
Select channels at VCR (in STOP or
PAUSE mode)
Press VCR/TV
(“VCR” lights up on Multi Function Display),
➛ select channels at VCR.
Record on a Tape
Forward/Reverse Scene Search
➛Press FF or REW.
➛Press PLAY to release.
After search has begun, each additional
press of FF or REW changes speed as
shown below.
[SLP] : Approx. 21X
↔ Approx. 9X
[LP] : Approx. 9X ↔ Approx. 7X
[SP] : Approx. 7X ↔ Approx. 3X
If at 21X, 9X, or 7X speed the picture is
interrupted, change speed to 9X, 7X, or 3X.
Still (Freeze) Picture
➛Press PAUSE/SLOW.
➛Press PLAY to release.
Frame by Frame Picture
➛Press PAUSE/SLOW in Still mode.
➛Press PLAY to release.
Slow Motion Picture
➛Hold down PAUSE/SLOW in Still mode.
➛Press PLAY to release.
Loose or peeling labels
may cause tape jam.
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see “Manual
Tracking Control” on p. 3.
After VCR is in Still or Slow mode 3 minutes, it
auto switches to Stop mode to protect the tape
and the video heads.
Press REW or FF in Stop mode to
Rewind or Fast Forward tape.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
3Press STOP to stop tape.
Playback a Tape
Watching one channel and recording
another is not possible when using Cable
Box or DSS Receiver.
After 5 minutes in Pause mode, VCR stops
to protect the tape and the video heads.
Picture interruption may occur with some TVs.
FF and REW search speed may vary
depending on current tape position.
Notes
Playback / Record on a Tape
Auto Play
Insert a tape ➛ Power comes on ➛ Play starts if no record tab (see p. 3).
Auto Rewind
Play
Fast Forward
Play Auto Eject(Repeat Play must be off)Play ➛ Tape end ➛ Rewind ➛ Tape ejects if no record tab
Auto Operation Functions
Notes
Notes
➛ Tape end ➛ Rewind
Connections / Initial Setup (Ready to Play)
- 4 -
Before Using
Head Cleaning
Important Safeguards Accessories Head Cleaning Loading Batteries Prevent Tape Erasure Specifications Record/Playback Time
- 3 -
Video Head Clog SensorScreen-right appears during play
if clogging is detected.
To remove screen, press PLAY.
Use “dry” type head
cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life. Old or damaged tapes may clog heads.V I DEO HEADS MAYNEED CLEAN I NGPLEASE I NSERT HEADCLEAN I NG CASSETTEOR REFER TO MANUAL
END : PLAY
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from a power source indicated on
the unit or in this manual. If necessary, have
your Electric Utility Service Company or Video
Products Dealer verify the power source in your
home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes
with either a polarized power cord plug (one
blade is wider than the other), or a three-wire
grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you
cannot fully insert the plug, try reversing it. If it still
will not fit, have an electrician install the proper wall
outlet. Do not defeat the safety feature by tampering
with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding
outlet. If necessary, have an electrician install the
proper outlet. Do not defeat the safety feature by
tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they
are not likely to have anything rest on them, roll
over them, or be in the way of walking traffic.
If an extension cord is used, make sure it also
has either a polarized or grounded plug and that
the cords can be securely connected. Frayed
cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be
replaced by a qualified service technician.
Overloaded outlets and extension cords are fire
hazards and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked,
heat build-up inside the unit can cause failures
that may result in a fire hazard or heat damage
to cassettes. For protection, follow these rules:
a. Never cover ventilation slots or the unit while
in use, or operate the unit when placed on a
bed, sofa, rug, or other soft surface.
b. Avoid built-in installation, such as a book
case or rack, unless proper ventilation is
provided.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near any kind of
heater or radiator, in direct sunlight, inside a
closed vehicle, etc.. Do not move the unit
suddenly between areas of extreme temperature
variation. If the unit is suddenly moved from a
cold place to a warm place, moisture may
condense in the unit and on the tape.
6 TO AVOID PERSONAL INJURY
Do not place unsecured
equipment on a sloping
surface.
Do not place this unit on any
support that is not firm, level,
and adequately strong. The
unit could fall causing serious
injury to a child or adult and
damage to the unit.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
Carefully follow all operating instructions and
use the manufacturers recommended
accessories when operating this unit or
connecting it to any other equipment.
FOR YOUR SAFETY, READ AND RETAIN
ALL SAFETY AND OPERATING
INSTRUCTIONS. HEED ALL WARNINGS IN
THE MANUAL AND ON THE UNIT
USING THE VIDEO UNIT
If the unit has been in storage or moved to a new location, refer
first to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by
a qualified service technician before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or
before leaving the unit unused for extended periods of time,
disconnect all equipment from the power source as well as
the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
Never expose the unit to rain or water. DO NOT
OPERATE if liquid has been spilled into the unit.
Immediately unplug the unit, and have it inspected by a
service technician. Fire and shock hazards can result from
electrical shorts caused by liquid contact inside.
Never drop or push any object through openings in the
unit. Some internal parts carry hazardous voltages and
contact can cause electric shock or fire hazard.
Avoid placing the unit directly above or below your TV set
as this may cause electrical interference. Keep all
magnets away from electronic equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to
avoid risk of fire, shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically
untreated cloth to gently remove dust or debris. DO NOT
USE cleaning fluids, aerosols, or forced air that could over-
spray, or seep into the unit and cause electrical shock. Any
substance such as wax, adhesive tape, etc. may mar the
cabinet surface. Exposure to greasy, humid, or dusty areas
may adversely affect internal parts.
SERVICE
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions,
this Video product does not operate properly, do not attempt
to open or remove covers, or make any adjustments not
described in the manual. Unplug the unit and contact a
qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified
by the manufacturer, or those having the same safety
characteristics as the original parts. The use of unauthorized
substitutes may result in fire, electric shock, or other
hazards.
3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY
CHECK
After any service or repairs to the unit, request the service
technician to conduct a thorough safety check as described
in the manufacture’s service literature to ensure that the
video unit is in safe operating condition.OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to the
equipment, be sure the antenna or cable system is grounded
so as to provide some protection against built up static
charges and voltage surges.
Section 810 of the National
Electrical Code, ANSI/NFPA
70 (in Canada, part 1 of the
Canadian Electrical Code)
provides information with
respect to proper grounding
of the mast and supporting
structure, grounding of the
lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit,
connection to grounding electrodes and requirements for the
grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER
LINES OR CIRCUITS
An outside antenna system should be located well away
from power lines, electric light or power circuits and where it
will never come into contact with these power sources if it
should happen to fall. When installing an outside antenna,
extreme care should be taken to avoid touching power lines,
circuits or other power sources as this could be fatal.
Because of the hazards involved, antenna installation should
be left to a professional.
Important Safeguards and Precautions
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENTANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC- NATIONAL
ELECTRICAL CODE
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
exposer cet appareil à la pluie ou à une humidité excessive.
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche
dans la borne correspondante de la prise et pousser jusqu’au fond.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the
user’s authority to operate.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
RISK OF ELECTRIC SHOCK
DO NOT OPENCAUTION
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any inside part of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in order
to avoid any problems.
- 2 -
Remote Control Buttons
Light Tower Universal Remote Control
LIGHT button:When pressed, available buttons light and selected mode button (TV, VCR, or
DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5
seconds. Also, hold down a button to confirm the selected mode (mode button
flashes) in the dark.
EJECT button:Press to eject tape. EJECT is not available during record.
LIGHT(Illuminates the remote)EJECT(Ejects tape)
DSS/CABLE mode(Enables DSS/CABLE functions)
POWER(Turns VCR off/on)
VCR/TV(For TV or VCR mode)
ACTION(Displays menu)
VCR (mode)(Enables VCR functions)
PAUSE/SLOW(Displays still, frame by frame,
or slow motion picture)
COUNTER RESET(Resets counter to zero)
VOLUME UP/DOWN(Adjusts TV volume)
SAP/Hi-Fi(Selects audio mode for play
or record)
TV (mode)(Enables TV functions)
PROGRAM/VCR+(Displays Timer Program screen)
TAPE POSITION(Locates tape position)
ADD/DELETE(Adds or deletes a channel)
SPEED(Changes tape speed)
RECORD(Records a program, etc.)
DISPLAY(Displays VCR status)
INPUT(For LINE or channel)
PLAY (Plays a tape)/FAST FORWARD/SEARCH(Fast forwards tape/ forward
visual search)
REWIND/SEARCH(Rewinds tape/ reverse visual
search)
STOP (Stops tape)
NUMBER Keys(Selects channel directly)
SEARCH/ ENTER(Sets Search System /TV channel)
COMMERCIAL SKIP/
ZERO SEARCH
(Starts Commercial Skip/
Zero Search)
CHANNEL UP/DOWN
TRACKING/ V-LOCK
(Selects channel/ reduces
picture noise during Play and
Slow mode)
PLAY, STOP, REW, and FF
function as operation keys when menus
are displayed.
Remote keys
Front View of the VCR
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
VCR Plus+ PROG. LISTDT START STOP CH SPD13 13 2 : 00 P
3
3 : 20P 02
SLP-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --CANCEL : ADD / DLT SELECT : SET :EXIT : PROG
VCR Plus+ PROG. LISTDATE START
STOPCH
SLP
SELECT START DATETODAY13 SAT --:-- --:-- --
SELECT : END : PROG SET:
VCR Plus+ PROG. LISTDT START STOP CH SPD 7 9 7 9 : 00A 12
12 : 00A 08 SP 8 10 : 00P 12 : 00P 02 SP10 8 : 00P 9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LPCANCEL : ADD / DLT SELECT : SET :EXIT : PROG
VCR Plus+ PROG. LISTDATE START
STOPCH
SELECT START DATETODAY 7 SUN 9:00A 12:00A 08 SP
SELECT : END : PROG SET:
VCR Plus+ PROG. LISTDT START STOP CH SPD-- -- : -- -- : -- -- -- 8 10 : 00P 12 : 00P 02 SP10 8 : 00P
9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LPCANCEL : ADD / DLT SELECT : SET :EXIT : PROG
Connecting
Connect cable from Antenna/Cable to
VCR’s IN FROM ANT. jack.
Connect VCR’s OUT TO TV jack to
TV’s ANT. IN jack with included RF
Cable accessory.
IN FROM ANT.
TVVCR
VHF/UHFOUT
TO TVIN from
ANT./CABLE
For ANT./Cable ➛ ➛➛ ➛
➛ VCR ➛ ➛➛ ➛
➛ TV
For DSS/Cable Box ➛ ➛➛ ➛
➛ VCR ➛ ➛➛ ➛
➛ TV
Connect your cable box’s OUT jack
to the VCR’s IN FROM ANT. jack with
an RF cable.
Connect VCR’s OUT TO TV jack to
TV’s ANT. IN jack with included RF
Cable accessory.IN FROM ANT. TV
VCR
VHF/UHFOUT
TO TVIN from
ANT./CABLE
Cable TV
Converter Box
1
2
Please make all cable or antenna connections before plugging into the AC outlet.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
1
1
2
2
2
1
WARNING
Over tightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.
1Turn TV on and tune to channel 3.
2Plug VCR Power Cord into AC wall
outlet. VCR comes on and auto
channel and clock set starts.
If screen below does not appear, check
VCR - TV connection and, if TV is tuned
to channel 3, try switching it to channel 4.
To change VCR’s output channel,
please refer to “VCR’s Output Channel”
in Advanced Operations book (p. 12).
If you use a cable box, turn it on and set it to
the Public Broadcasting Station (PBS)
channel in your time zone. If you use DSS
receiver, it must be turned off.
3Settings are made automatically.
When setup is done, this screen
appears.
Doing Initial Setup (Ready to Play)
4SELECT CONNECTION screen is
displayed.
(If ANT./Cable ➛ ➛➛ ➛
➛ VCR ➛ ➛➛ ➛
➛ TV connection,)
press
* to select “VCR TV”, or
“VCR
CABLE/DSS BOX TV”, and
press to set.
(If DSS/Cable Box ➛ ➛➛ ➛
➛ VCR ➛ ➛➛ ➛
➛ TV connection,)
press to select “CABLE/DSS BOX VCR TV” and press to set.
Verify the output channel of your
cable box or DSS receiver and press
to select and to enter that
channel number.
Plugging the AC Power Plug into an AC outlet
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock. See below.
If Auto Clock Set was incomplete.
aPress ACTION on remote to display
CLOCK screen.
bPress to select the month and to set. In the same manner, select and
set the date, year, time, and DST
(daylight saving time).
cPress ACTION to start clock, and go to
step 4 above.
Manual Clock Set
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
CH AUTO SET PROCEEDING
CANCEL :
STOPSELECT CONNECTION
VCR TVCABLE / DSS BOX VCR TV
VCR CABLE / DSS BOX TV
SELECT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
CABLE / DSS BOX OUTPUT CHCH 0 1
CABLE / DSS BOX VCR TVSELECT CONNECTION
SELE
CT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
SELECT CONNECTION
VCR TVCABLE / DSS BOX VCR TV
VCR CABLE / DSS BOX TV
SELECT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
Congratulations
on your new purchase! With proper use, this
dependable product will provide years of
enjoyment. Please fill in the information below.
(Serial number is on tag on back of VCR.)
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
PV-V4602
Serial No.
RF Coaxial
Cable
VJAS0196
Batteries 2 “AA”Remote Control
LSSQ0300
Accessories
To order accessories, call toll free
1-800-332-5368.
Loading the Batteries
Battery replacement cautionDo not mix old and new batteries.
Do not mix alkaline with manganese batteries.
Prevent Accidental Tape Erasure
Record Tab
Screw driverCover the hole
with cellophane
tape.
To record again
Break off the tab to
prevent recording.
Only use tapes with the mark in this unit.
Record/Playback Time
2 Hours
40 MinutesSP(Standard Play)1 Hour 2 Hours
5 Hours
20 Minutes 2 Hours4 Hours LP(Long Play)
3 Hours
6 Hours 8 Hours SLP(Super Long Play)
Type of Video Cassette
Tape Speed
Setting
T160 T120 T60
Use soft, dry cloth or dusting attachment of a
vacuum to remove dust from all cabinet vent
holes. You may moisten cloth with nonabrasive,
antistatic cleaner/ polisher.
Caution:
Alcohol and various solvents could damage finish.
Cleaning the VCR
Power Source:120 V AC, 60 Hz
Power Consumption:Power OnApprox. 23 WPower OffApprox. 3.0 W
Video Signal:EIA Standard NTSC color
Video Recording4 rotary heads helical
System:scanning system
Audio Track:1 track (Normal)
2 channel
Hi-Fi Audio Sound
Tuner:
Broadcast Channels:VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels:Midband A ~ I (14 ~ 22)
Superband J ~ W (23 ~ 36)
Hyperband AA ~ EEE
(37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A
(01)
Ultraband 65 ~ 94, 100 ~ 125
Operating
Temperature:5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity:10 % ~ 75 %
Weight:2.7 kg (6.0 lbs).
Dimensions:430 (W) x 98 (H) x 242 (D) mm
16-15/16” (W) x 3-7/8” (H) x
9-9/16” (D) inch
Specifications
Note: Designs and specifications are subject to
change without notice.
Digital Auto PictureAutomatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto TrackingContinuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control(to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press CH (TRACKING)
/ on the remote
control or on the VCR until the picture clears up.
To return to Auto Tracking, press POWER off,
then on again a few seconds later.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) / operate as a
V-Lock control.
Features for a Quality Picture
RRRRRRRR
VCR/TV selector
RECORDSTOP/EJECT Cassette Compartment
POWERREWIND/
SEARCH
PLAY
CHANNEL UP/ DOWN
TRACKING/ V-LOCK
Remote
Sensor
FAST FORWARD/
SEARCH
Video
Input
Connector
Audio Input
Connector
(L/R)
AUTO CLOCK SET IS
INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEYVCR CLOCK CHANNEL
VCR CLOCK CHANNEL
SELECT MONTH
DST:ON1 / /:
SELECT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
SET COMPLETED
DST:ON9 /29 / 20 0 2 SUN 2 : 20PM
START : ACT I ON SET :
VCR CLOCK CHANNEL9 /29 / 20 0 2 SUN 2 : 20PMDST : ONSETT I NG : CH 10
AUTO CLOCK SET
COMPLETED
Built-in Head Cleaner
A clean video head helps produce a clear
picture. So, we have equipped your VCR with a
built-in, non-chemical head cleaning system that
helps prevent clogging of the video heads.
Cleaning is performed each time you load or
unload a video cassette.
This feature is preventative only, If your video
heads are seriously clogged, consider the use
of a chemical non-abrasive head cleaning kit
or take your VCR to a Service Center.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Video Cassette Recorder Operating Instructions (Advanced Operations) For Basic operations, see the separate “Basic Operations” instruction book. Reset Language, Channels, Clock, VCR’s Output Channel• Reset Language, Channels, Clock, VCR’s Output Channel DST On-Screen Displays (OSD) Press ACTION to display MENU. Language1)Press to select language item. For Spanish For French For English Channels 2)Press to select “ANTENNA,” then press to set your antenna system (“TV” or “CABLE.”) After Channel Auto Set is finished, Auto Clock Set will be performed. 3)Press to select “AUTO SET,” then press . If you use Cable Box, set it to the PBS channel in your time zone. Clock 2)Press to select “MANUAL,” and press . (For Auto Clock Set, select “AUTO CLOCK SET.”) (“TIME ZONE ADJUST” appears only when auto clock is set.) 3)Press and to select and set the date, time, and DST (Daylight Saving Time). 4)Press ACTION to start the Clock and exit this mode.and press to subtract or add hour(s) as necessary. “TIME ZONE ADJUST” returns to “0” if clock is set manually. VCR’s Output Channel After 3 seconds To Make Corrections, repeat steps 1) ~ 3). 2)Press repeatedly. 3)Press ACTION to exit.1)Press to select CHANNEL.1)Press to select CLOCK. Time Zone Adjust 1)Press to select CLOCK. (Only when Auto Clock is set.) 2)Press to select “TIME ZONE ADJUST” 3)Press ACTION. Add or Delete a Channel To add channel: Select channel with NUMBER keys and press ADD/DLT. To delete channel: Select channel with CH / or NUMBER keys and press ADD/DLT. DST (Daylight Saving Time) VCR auto adjusts clock for DST. Spring (First Sunday in April) DST:ON ➛ Sets clock ahead one hour. Autumn (Last Sunday in October) DST:ON ➛ Turns clock back one hour. If your area does not observe Daylight Saving Time, select DST:OFF. Keep these time changes in mind when programming VCR for timer recordings. 1)Press to select “VCR’S OUTPUT CH.” 3)Press ACTION. 2)Press . - 12 - CHANNEL 08 ADDED CHANNEL 08 DELE TED On-Screen Displays (OSD) REC 1 2 : 0 0AM0 : 25CH 02-0 : 1 2 : 3 4 SPSTEREOSAPMONO VCR Status & Clock Displays Function & Channel Displays Blank Tape/ No Video Signal Indications When blank tape is detected during play, or the current channel has no signal (with Weak Signal Display feature (p. 10) set to OFF), the TV screen will turn solid blue. Function Status Rec Time Remaining (OTR mode only. See p. 5 of Basic Operations book.) CH 0 8 Current Time Channel Tape Speed(See p. 3 of Basic Operations book.)Broadcast Audio Being Received When a function button is pressed, e.g. PLAY, or you change channels, a 5 second display appears. Counter To display or remove overlay at right, ➛ press DISPLAY*. On-Screen Displays (OSD) These displays will alert you to a missed operation or provide further instructions. OSD Caution Page PLEASE SET CLOCK BY PRESSING ACTION KEYIf you attempt to set or review a Timer Recording and the Clock is not set... After a Timer Program has been set... If you press REC on the remote control or VCR, and a cassette is inserted with no record tab... If you press PLAY, FF, REW, or REC on the remote control or VCR without a cassette inserted... CHECK CASSETTE RECORD TAB NO CASSETTE TURN VCR OFF FOR TIMER RECORDING If you press POWER or STOP during a Timer Recording... (visible in VCR mode only) If you press an invalid key on the remote while in TV mode...TO CANCEL TIMER REC PRESS POWER THEN STOP KEY VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END :PLAY VCR LOCK ACTIVATED REMOTE CONTROL IS SET TO TV MODE USE VCR : VCR KEY If head cleaning becomes necessary while playing back a tape... If you press a function button other than STOP/EJECT or POWER while the VCR is in VCR Lock mode... Warning and Instruction Displays See page 6 of Basic Operations book See page 6 of Basic Operations book See page 3 of Basic Operations book See page 5 of Basic Operations book See page 6 of Basic Operations book See page 3 of Basic Operations book See page 10 See pages 2, 10 *Important:If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. - 11 - Tape Position Display Feature Special VCR Features Special VCR Features Copy Your Tapes (Dubbing) Before Requesting Service “DETECTING TAPE POSITION” only appears the first time a cassette is inserted and it takes several seconds for correct indication to appear. The present tape position indication is displayed. BEG I N END To find out the present tape position. Tape position is displayed for VHS-C Cassettes type, tapes under 30 minutes, and some other tapes, but the position is not correct.When set to “ON,” picture is displayed regardless of signal strength. ON: Picture is displayed despite signal condition an may have poor quality. OFF: Screen turns solid blue when signal is weak or non-existent. Selecting ON has no effect on connected equipment with blue back feature.Press to select and display CHANNEL. Press to select WEAK SIGNAL DISPLAY, and press to set ON or OFF. The power shuts off at a preset time. Press to select AUTO SHUT-OFF. Press repeatedly to change shutoff time as shown below. 1Press TAPE POSITION to detect tape position. DETECTING TAPE POSITION 2Press TAPE POSITION to return to normal screen. If Multi-brand feature is used (page 2), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV, DSS or Cable mode. If “OFF,” remote warning will not appear if invalid key is pressed. Press to select REMOTE WARNING and press to set ON or OFF. Remote Warning ON/OFF Feature 1Press ACTION to display menu. 2 3 Press ACTION to return to normal screen. When set to ON, all operations except for timer record and tape eject are prohibited. Useful for households with small children. VCR LOCK ACT I VATED VCR LOCK OFF VCR Lock cancels in 24 hours if clock is set.To turn on, hold down REC on the VCR in Stop mode with no tape inserted for 7 sec. (Please ignore the NO CASSETTE warning.) To turn off, repeat above. Auto Shut-Off Feature 1Press ACTION to display menu. 2 3 Press ACTION to return to normal screen. Weak Signal Display ON/OFF Feature 1Press ACTION to display menu. 2 3 Press ACTION to return to normal screen. VCR Lock Feature *Important:If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. - 10 - OFF 2 Hours 4 Hours 6 Hours The shut-off countdown will not function during Play or Record.Note Insert pre-recorded tape. Insert blank tape with record tab. Press REC, then PAUSE/SLOW immediately to enter REC/PAUSE mode. Press INPUT* to set VCR Input mode to LINE1 for Video Input (Rear) or to LINE2 for Video Input (Front). (See “Selecting the Input Mode” below.) Press PLAY to start dubbing. Playing VCR starts playback.Press PAUSE/SLOW to start dubbing. Recording VCR starts recording. Press STOP to stop dubbing. To Monitor Dubbing on Your TV 1Turn your TV on and tune to the Recording VCR channel (CH3 or CH4). 2Set the VCR/ TV Selector on the Recording VCR to “VCR.” Dubbing tapes protected with Copy Guard will have poor quality results. Selecting the Input Mode Method 1: Press INPUT repeatedly. Channel Number ↔ ↔↔ ↔ ↔ LINE1 ↔ ↔↔ ↔ ↔ LINE2 Method 2: Press CH / . Display will change as below. “L1” or “L2” lights on Multi-Function Display (about 4 sec.) when LINE1 or LINE2 is selected. LINE1: For rear audio/video connection. LINE2: For front audio/video connection. Press STOP to stop dubbing. Press PLAY, then PAUSE/SLOW immediately to enter PLAY/PAUSE mode. The operation of steps 4 and 5 must be done on both playing and recording VCRs at the same time. Playing (Source) VCRRecording (Editing) VCR 1 2 3 4 5 Caution :Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. - 9 - Note1 23 125 LINE1(CABLE)69(TV)orLINE2 Copying Your Tapes (Dubbing)Before Requesting Service Power No power… Recording & Playback TV program cannot be recorded... Timer recording cannot be performed… There is no playback picture, or the playback picture is noisy or contains streaks... Special effects playback, picture may contain some vertical jitter when using a TV with an Automatic Vertical Hold Control... VCR cannot be controlled... Check the following points once again if you are having trouble with your VCR.(BO : refers to “Basic Operations” Instruction book.) (AO : refers to “Advanced Operations” Instruction book.) Correction Completely insert Power Plug into an AC outlet. Set POWER button to on. Make sure power source is active. Miscellaneous Programs cannot be viewed on TV... Video cassette cannot be inserted... Video cassette cannot be removed... Video cassette ejects when a recording is started or the power is turned off for timer recording... In Stop mode, the motor (CYLINDER) continues to rotate... Remote Control VCR cannot be remote controlled... ACTION and PROG/VCR+ buttons do not respond... If you cannot resolve the problem, please call the Customer Call Center for product assistance at 1-800-211-PANA (7262). To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). or send e-mail to : [email protected] Check connections between VCR, external antenna, and TV. Check connections selection. (BO p. 4, AO p. 3) Make sure your antenna system (CABLE or TV) is correctly set. (Channels [AO p. 12]) Make sure cassette record tab is intact. (BO p. 3) Confirm that clock is set to current time and date. Make sure Cable/DSS box (if used) is left on and tuned to channel to be recorded. Set recording start/stop times correctly. (BO p. 6) Make sure VCR POWER button is pressed off. (BO p. 6) Timer recording may not be performed or continued if a power interruption occurs before or during a Timer Recording, even after power is restored. Select channel 3 or 4 on TV to match VCR output channel (3 or 4) (BO p. 4) or select LINE. Set VCR/TV selector to “VCR.” Adjust TRACKING control in either direction. (BO p. 3) Try Head Cleaning. (BO p. 3) Set TV’s Vertical Hold Control to MANUAL, then adjust. Make sure VCR power is on. Check Remote batteries. Make sure VCR LOCK is set to off. (AO p. 10) Make sure Remote is in proper mode. (AO p. 2) Make sure Timer Record is not in progress. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985Printed in Indonesia LSQT0535A S1201-0 P Correction Make sure VCR power is on. Make sure Remote is in VCR mode. Aim Remote Control directly at remote sensor on VCR. (BO p. 7) Avoid any object blocking signal path. Check Remote batteries. (BO p. 3) Make sure VCR LOCK is set to off. (AO p. 10) Exposing VCR remote sensor to direct fluorescent or outdoor light may cause signal interference. Check connections between VCR, external antenna, and TV. Press VCR button for VCR mode. (AO p. 2) Check Remote batteries. (BO p. 3) Correction Make sure TV power is on. Make sure TV is set to output of VCR. Check connections between VCR, external antenna, and TV. Set VCR/TV selector to “TV.” (BO p. 5) Make sure proper signal source is selected. Insert the cassette with window side up; record tab facing you. Check if a tape is already in the unit. Completely insert Power Plug into an AC outlet. Make sure cassette record tab is intact. (BO p. 3) To enable Quick play mechanism, the cylinder will rotate for about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. - 8 - Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual. LSQT0535A Model No. PV-V4602 Table of Contents Multi-Brand Control Feature ..................................... 2 Advanced Connections (Cable/DSS) ....................... 3 MTS Broadcast / VHS Hi-Fi Stereo System ............. 4 Tape Operation ........................................................ 5 Timer Recording Using VCR Plus+ System ......... 6, 7 Before Requesting Service ...................................... 8 Copying Your Tapes (Dubbing) ................................ 9 Special VCR Features ............................................ 10 On-Screen Displays (OSD) .................................... 11 Reset Language, Channels, Clock, VCR’s Output Channel ...12 SELECT : EXIT : ACT I ON VCR CLOCK CHANNELANTENNA : CABLE AUTO SETWEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP VCR CLOCK CHANNELANTENNA : CABLE AUTO SETWEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP SELE CT : SET : EXIT : ACT I ON REC 1 2 Front of VCR (Front Audio L/R Video IN jacks are also provided) Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR. To monitor the dubbing, also connect a TV as shown. Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR. In place of a Playing VCR, you can use other equipment, such as a Camcorder. Simply connect the unit’s Audio/Video outputs to the Recording VCR. VCR (HiFi) IN FROM ANT. OUT TO TV VIDEO OUT AUDIO OUT AUDIO IN VIDEO IN TV VHF/UHF R LRLR LR VCR (HiFi) Connection VIDEO IN 2L-AUDIO IN2-R (Rear connection shown.) As an ENERGY STAR® Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR ® guidelines for energy efficiency. VCR Plus+, A LLSET and PlusCode are trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. SELECT : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL SEL. : REGLER: QUITTER : ACT I ON MAGNETO. HORL. CANALREPRISE LECTURE : NONMESSAGE D’ ERREUR : OUICOUPURE AUTO : NON LANGUAGE/IDIOMA : FRANÇAIS CA SORTIE : 3 ELEGIR : FIJAR : SAL I R : ACT I ON VCR RELOJ CANALREPETICION :INACTAVISO/CONT.REMOTO :ACT APAGADO AUTOMATICO :INACTLANGUE/LANGUAGE:ESPAÑOL CANAL DE SALIDA :3 VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL CH AUTO SET PROCEEDING CANCEL : STOP VCR CLOCK CHANNELAUTO CLOCK SET MANUALTIME ZONE ADJUST : 0 SELECT : EXIT : ACT I ON VCR CLOCK CHANNEL SELECT HOURDST:ON9 /29 / 20 0 2 SUN SUN 2 2 : --PM SELECT : SET : EXIT : ACT I ON VCR CLOCK CHANNELAUTO CLOCK SET MANUALTIME ZONE ADJUST : 0 SELE CT : SET : EXIT : ACT I ON VCR CLOCK CHANNELAUTO CLOCK SET MANUALTIME ZONE ADJUST : 0 SELE CT : SET : EXIT : ACT I ON VCR CLOCK CHANNELAUTO CLOCK SET MANUALTIME ZONE ADJUST : 0 SELECT : EXIT : ACT I ON VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :4 VCR CLOCK CHANNELIF YOU PRESS ACTION KEY, VCR ’ S OUTPUT CH SWITCHES TO CH 4. VCR CLOCK CHANNELPLEASE TUNE YOUR TV TO CH 4. SELECT : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL VCR CLOCK CHANNELANTENNA : CABLE AUTO SETWEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP SELE CT : SET : EXIT : ACT I ON VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3
• Timer Recording Using VCR Plus+ System
- 7 -- 6 -
MTS Broadcast VHS Hi-Fi Stereo System Tape Operation
- 5 -- 4 -
Advanced Connections Advanced Connections Multi-Brand Control Feature
- 3 -
Multi-Brand Control Feature
- 2 -
Initial Setup.....To use VCR Plus+ system, clock and channels must be set (p. 4 of “Basic Operations” book).
Channel Setup.....Broadcast/ cable stations are assigned a VCR Plus+ (GUIDE CH) number. See the Channel
Listing (directory) page of TV GUIDE, etc. In the Channel Setup below, you will be entering your
local channel number (RECEIVE CH) for each GUIDE CH number.
Example: if NBC’s assigned GUIDE CH were 05, and your TV received NBC on channel 04, you
would enter 04 across from GUIDE CH 05 in step 4 of “Manual VCR Plus+ System
Channel Setup”.
Manual VCR Plus+ System
Channel Setup
For [VCR
➛ ➛➛ ➛
➛ TV] or [VCR
➛ ➛➛ ➛
➛ cable box
➛ ➛➛ ➛
➛ TV]
connection only.
1
2Press ACTION
to display menu, and
Press
to select CHANNEL.
Press
to select VCR Plus+ CH
SET UP, and press to
set.
4
Repeat step 4 until list
is complete.
Leave line blank if
station is not received
or if GUIDE and
RECEIVE CHs are the
same.
To Make Corrections,
press
and to move to error, then to
change, or ADD/DLT to erase number. Press
to move cursor
to right, press to
enter number, press
to set, press to
scroll up/down.
5Press ACTION twice to end setup.
Do normal Timer Record if... PlusCode number is not listed for program.
program (e.g. sports event) may run over set stop time.
See page 6 of “Basic Operations” book to:
cancel a timer recording in progress.
review, replace, or clear program contents.
Important for DSS/Cable Box Users
When recording via DSS, the receiver must be left on. When recording via cable or antenna, DSS
receiver must be off.
When recording via a cable box, leave box on and tuned to channel to be recorded.
You’ll need a local TV channel listing (e.g. TV
GUIDE) which includes the assigned VCR Plus+
numbers.
CLEAR : ADD/DLT
SELECT : SET:
EXIT : ACT I ON
GUIDE CH RECEIVE CH01 --02 --
VCR CLOCK CHANNEL
CLEAR : ADD/DLT
SELECT : SET:
EXIT : ACT I ON
GUIDE CH RECEIVE CH01 --02 --
VCR CLOCK CHANNEL
To Make Corrections,
press repeatedly
to delete number, then
repeat step 3.
Press PROG/VCR+ button to display PROGRAM.
Press to select
display VCR Plus+
screen.
Press NUMBER keys
to enter PlusCode
number and press
PROG/VCR+ button
to set.
VCR Plus+ System Programming
1
2
3
4
If the PlusCode number entered begins
with “0,” skip to step 5. Display in step 4
will not appear.
Press PROG/VCR+
button to end program.
Press to select
ONCE, DAILY
(MON~FRI), or WEEKLY
record frequency and
press PROG/VCR+
button to set.
Press to change
record speed and
press
to set.
Press PROG/VCR+
button again to exit.
Press ADD/DLT
to delete the program.
5
6
Press POWER off to set timer Recording.
(“TIMER” lights on Multi Function Display.)7
Do not overlap program times.
See “Important for DSS/Cable Box Users” above.
Make each entry within 1 minute or VCR exits setup.
Once VCR Plus+ channel setup is done, channels stay in memory. If there’s a power outage,
channel setup may be lost. Please do channel setup again.
Obtain unlisted PlusCode numbers by calling 1 - 900 - 454 - 7587. Call costs about $.95 per
minute.
Notes
VCR Plus+ PROG. LISTENTER PLUSCODE NUMBER
USING 0 - 9 KEYS -
SELECT :
EXIT : PROG
VCR Plus+ PROG. LISTENTER PLUSCODE NUMBER
USING 0
- 9 KEYS
BACKSPACE : END : PROG
1
VCR Plus+ PROG. LISTONCEDAILY(MON-FRI)
WEEKLY
SELECT :
END : PROG
VCR Plus+ PROG. LIST
SELECT : END : PROG
DATE START
STOPCH
SLP
SET:SELECT RECORD SPEED
13 SAT 2:20P 3:20P 02 TODAY
VCR Plus+ PROG. LISTDT START STOP CH SPD13 13 2 : 00
2 : 00 P
3 : 20P
02
SLP
SLP-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --CANCEL : ADD / DLT SELECT : SET :EXIT : PROG
Set to playback a recording over and over.
Repeat Play
1Press ACTION to display menu.
3Press ACTION to return to normal screen.
ON : Play repeats at tape end
or if unrecorded portion
over 30 sec. is detected.
Press to select
REPEAT PLAY and
press
to set ON or
OFF.
2
To quickly return to a specified tape location.
Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00. Press RESET
COUNTER at desired
position to reset to
“0:00:00”.
Press CM/ZERO in
Stop mode to start
ZERO SEARCH.
Zero Search
Press DISPLAY during play to display
Counter.
2
3
Continue to record, playback, etc.
4Press Stop.
5
1
PLAY 1 2 : 0 0AM 0 : 0 0 : 0 0 SP
REW 1 2 : 3 0AM CH 02 0 : 30 : 30 SP
STOP 1 2 : 3 1AM CH 02 0 : 0 0 : 0 0 SP
MTS Broadcast/VHS Hi-Fi Stereo System
Equipped with ®-TV Noise
Reduction for true MTS
reproduction.
®-TV Noise
Reduction is required for good
stereo separation and audio
fidelity.
® is a registered
trademark, and is licensed by
® Technology Licensing.
Make the Audio/Video Connection as shown on page 3.
You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
Stereo Amplifier
AUDIO INRL
VCR
RLR
OUT TO TV
VHF/UHF
TV
R
L
AUDIO OUT
Connection
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub language) broadcast.
Select SAP audio mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select STEREO audio mode.
If stereo broadcast is weak and display flickers, select
MONO audio mode for possibly better results.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language)
and Secondary Audio Program (sub language)
broadcasts are being received simultaneously.
Select STEREO or SAP audio mode.
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an “” mark while the selected audio mode is
indicated with an arrow.
To display the broadcast signal being received,
➛ ➛➛ ➛
➛ press DISPLAY*.
Receivable Broadcast Types
STOP 1 2 : 0 0AMCH 02 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP 1 2 : 0 0AMCH 02 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP 1 2 : 0 0AMCH 02 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP 1 2 : 0 0AMCH 02 0 : 0 0 : 0 0 SPSTEREOSAPMONO
Arrow indicates selection.
STEREOSAPMONO
H I F I : L / RH I F I : L H I F I : RNORMAL
Refer to “Receivable
Broadcast Types”
above.
Press SAP/ Hi-Fi
repeatedly to select
desired mode.
Audio Mode for Recording
1Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
2
3
Do a recording.
See p. 5 of “Basic Operations”
Instruction book.
Audio Mode for Playback
1Start playback.
See p. 5 of “Basic Operations”
Instruction book.
2Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
3
Arrow indicates
selection.Select “HIFI(L/R)”
or “HIFI(L)” or
“HIFI(R)” to listen to
stereo recordings in
stereo sound.
Select “NORMAL”
for monaural sound.
Press SAP/ Hi-Fi
repeatedly to select
desired mode.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes
will playback in monaural sound.
To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV
or an external stereo amp and speakers. (See top of this page.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio playback volume level may differ.
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Notes
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR
to them to receive higher quality picture and sound.
Connect the VCR’s VIDEO OUT jack to the TV’s VIDEO IN jack.
Connect VCR’s L/R AUDIO OUT jacks to the TV’s L/R AUDIO IN jacks.
Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
Audio/Video connection
TV VCRIN FROM ANT.
OUT TO TVVHF/UHF
VIDEO IN
R
L
AUDIO INLR
VIDEO OUT
AUDIO OUT
R
1
2
3
You CannotYou Can
record and view
both scrambled
and
unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter
boxes, an A/B
switch, and a 2-
way splitter.view channel
other than
the one
selected for
any type of
recording.
do a Timer
recording of
a channel
unless you
select it at
the cable
box.
IN
VIDEO AUDIO
R
LOUT
IN FROM ANT.
OUT TO TV AUDIO
IN 1
VHF/UHF
R
L
VIDEO
OUTTV
IN 2 IN 1
CABLE BOX
OUT INOUT 2 OUT 1
2-Way Splitter
CABLE BOX
OUT
A/B Switch
VCR
IN
VHF/UHF
Connect With Two Cable Boxes
VCR
IN FROM ANT.
OUT TO TV AUDIO
IN 1
VHF/UHF
R
L
VIDEO
OUT
CABLE BOX
OUT IN
IN
R
LOUT
TV
VIDEO AUDIO
VHF/UHF
With a Cable Box (VCR
Cable Box)
ANT
or
CATV
You CannotYou Can
record
scrambled
channels. view any
(including
scrambled)
channel.
use VCR
Remote
Control to
select
channels
without using
Multi-brand
control feature.
ANT
or
CATV
The Remote Control can be set to control some TV and Cable box/DSS functions.
After remote is set up, you can select VCR, TV, or DSS/CABLE for the desired function.
Press VCR, or TV, or DSS/CABLE on the remote.
(Table below shows available unit buttons for each mode.)
Not all functions listed may be controllable.
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing
NUMBER keys for channel selection. ➛ hold down TV button,
➛ enter code with NUMBER keys.
Repeat setup after remote battery replacement.
Remote will not control every TV, cable box, or DSS made by the manufacturer listed.
If you get no response, your particular unit cannot be controlled. There are NO
additional codes for the products listed. If your product is not listed, then the remote is
not compatible with that product.
Multi-Brand Control Setup
1Find your TV and Cable Box/DSS Receiver Brand Code Number from those shown below.
3Confirm code entry,
➛ press POWER to turn your TV on or off.
See table below for controllable functions in each mode.
Using Multi-Brand Control
➛ hold down DSS/CABLE button,
➛ enter code with number keys.
If code number is 100 or greater,
➛ press 100 key, then other digits. E.g., press 100 - 0 - 2 for 102.
Setup for Cable or DSS control,
ModeUnitVCR TV
VCR
TV
AllVOL UP/DOWN
POWER, INPUT, number
keys, ENTER, CH UP/
DOWN, VOL UP/DOWN VCR/TV, PLAY, STOP,
EJECT, SAP/ Hi-Fi, DISPLAY,
FF, REW, PAUSE/SLOW,
REC, SPEED, CM/ZERO,
COUNTER RESET, TAPE
POSITION
CABLE/ DSS
CABLE/
DSSVOL UP/DOWNPOWER, ENTER, NUMBER
keys (except 100key),
CH UP/ DOWN
Notes
Notes
2Setup for TV control,
Panasonic.......................01, 02
Quasar ............................01, 02
RCA ...................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox ............................. 05
TV Brand Code Numbers
Sylvania................................ 05
Sharp ..............................06, 07
Sony ...................................... 08
Toshiba ................................. 09
Sanyo .................................... 10
Fisher .................................... 10JVC ....................................... 11
Hitachi ................................... 12
Mitsubishi ........................07, 13
Samsung ............................... 14
Gold Star...................15, 16, 17
Cable Box Brand Code Numbers
Archer ............................... 05, 06, 01, 44, 63, 91, 126
Cabletenna ................................... 01, 44, 63, 91, 126
Cableview ................. 63, 44, 42, 30, 52, 04, 124, 126
Century ......................................... 51, 44, 59, 75, 126
Citizen ...................... 63, 44, 42, 30, 52, 04, 124, 126
Curtis .............................................. 08, 09, 61, 53, 87
Diamond ....................................... 01, 44, 63, 91, 126
Drake ..................................................................... 67
Eagle .......................... 13, 22, 58, 62, 20, 40, 26, 107
Eastern .......................................................... 28, 130
GC Brand ................. 63, 44, 42, 30, 52, 04, 124, 126
Gemini ........................................................... 04, 124
General Electric ............................................... 57, 01
General Instruments .. 01, 02, 03, 04, 34, 55, 83, 106,
65, 67, 68, 115, 117, 118, 124, 91
Hamlin .......... 14, 15, 28, 41, 102, 103, 104, 108, 130
Hitachi ................................................................... 31
Jasco ............................................................. 04, 124
Jerrold ....................... 01, 02, 03, 04, 34, 55, 83, 106,
65, 67, 68, 115, 117, 118, 124, 91
Macom .................................................................. 31
Magnavox ...................................................... 26, 112
Matsushita .......................................... 16, 17, 97, 109
Movietime ......................... 32, 39, 42, 44, 126, 38, 40
NEC .......................................................... 38, 40, 32
NOVAVISION ................................. 08, 09, 61, 53, 87
NSC .......................................................... 38, 40, 32
Oak ........................................................... 46, 11, 129
Oak Sigma ............................................... 46, 11, 129
Panasonic .......................................... 16, 17, 97, 109
Philips ....................... 07, 13, 20, 23, 24, 50, 128, 129
Pioneer ............................................................ 05, 06
Pulsar ....................... 63, 44, 42, 30, 52, 04, 124, 126Quest ............................................................... 05, 06
Radio Shack ................................. 51, 44, 59, 75, 126
RCA ................................................... 16, 17, 97, 109
Realistic ........................................ 51, 44, 59, 75, 126
Recoton ........................................ 51, 44, 59, 75, 126
Regal ............ 14, 15, 28, 41, 102, 103, 104, 108, 130
Regency ........................................................ 28, 130
Rembrandt ........................ 01, 32, 39, 42, 44, 63, 126
Salora .................................................................... 68
Samsung ........................................ 05, 32, 40, 42, 06
Scientific Atlanta ............................. 08, 09, 61, 53, 87
Sheritech ............................................................... 27
Signal ............................................................ 26, 112
SL Marx ................ 32, 40, 42, 06, 43, 44, 52, 63, 126
Sprucer ............................................... 16, 17, 97, 109
Standard Components .................. 32, 39, 42, 44, 126
Stargate .. 32, 40, 63, 44, 42, 30, 52, 04, 06, 124, 126
Sylvania ................................................................. 19
Teknika .................................................................. 74
Telecaption .................................................... 77, 127
Teleview ............................................... 32, 40, 42, 06
Texscan ........................................................... 18, 19
Tocom ...................................... 33, 34, 01, 42, 66, 91
Toshiba ................................................................. 36
Uniden Satelite ...................................................... 65
Unika ............................................ 01, 44, 63, 91, 126
Universal ................................ 42, 43, 44, 52, 63, 126
Videoway ............................................ 07, 23, 50, 129
Vid Tech ................................................................ 64
Vidtek .................................................................... 64
Viewstar ..................... 13, 22, 58, 62, 20, 40, 26, 107
Zenith ................................................. 07, 23, 50, 129
Toshiba ................................................................. 92
Hitachi/ Hughes.................................................... 93
Magnavox/ Uniden 1............................................. 94
Magnavox/ Uniden 2............................................. 95
DSS Brand Code Numbers
Panasonic ............................................................ 96
RCA ..................................................................... 97
Sony .............................................................98, 105
Due to changes in infra-red commands used by manufacturers, some brands have
several codes. If your unit does not respond to the first code, please try the next one.
Some TV, Cable Box and DSS Box brands require you to turn on the power manually.Important
Notes
Timer Recording Using VCR Plus+ SystemTimer Recording Using VCR Plus+ System
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
Index SearchProgram End Search
1
2Press SEARCH to
display SEARCH in Stop
or Play mode, and then
press NUMBER keys to
select recording
number.
To calculate number,
see below.
Press FF or REW on
the remote to start
search.
Play begins at search
end. To search forward
or back 1 index, press
FF or REW on the
remote or VCR while
screen left is displayed
(10 sec.).
To cancel, press
STOP or PLAY.
INDEX SEARCH
FORWARD SEARCH :FF
REVERSE SEARCH :REW
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE:
indicates start points of each recording.
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
6157234
17534 62
NoteLocates end point of recording for continuity.
Examples of Program End Search.
Press FF on the
remote to start
PROGRAM END
SEARCH.
1Press SEARCH twice to display
SEARCH in Stop or Play mode.
2
To cancel, press
STOP or PLAY.
Examples of Program End Search.
➛search continues 7 sec. past end point,
➛tape rewinds to 10 sec. before end point,
➛tape plays to end point and stops. Upon locating end point,
Fig. 1
End Point
Program 2 or BLANK Program 1
the current tape position
Press SEARCH button
FF
INDEX
Fig. 2
End Point
Program 2 Program 1 the current tape position
Press SEARCH button
INDEXINDEX BLANK BLANK
FF
Fig. 3
End Point
Program 2 Program 1
the current tape position
Press SEARCH button
BLANKINDEX
FFIf search
exceeds a few
seconds in
BLANK area.
If Program End Search is started very close
to an index mark, that mark may be skipped
over.
Note
Tape Operation
VCR fast forwards (skips) over 1~3 minutes of
recorded tape.
Press CM/ZERO repeatedly to change
skip time as shown below.
No indication appears.
PLAY
1st Press
2nd Press
3rd Press1 min Skip
2 min Skip
3 min Skip
VCR CLOCK CHANNEL
SELECT : SET :
EXIT : ACT I ON
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT- OFF :OFFIDIOMA/LANGUE : ENGLISHVCR’ S OUTPUT CH :3
Commercial Skip
1Press CM/ZERO in Play mode.
SELECT :
EXIT : ACT I ON
VCR CLOCK CHANNELANTENNA : CABLE
AUTO SETWEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR CLOCK CHANNELANTENNA : CABLE
AUTO SETWEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELE
CT : SET :
EXIT : ACT I ON
AUTO SET
MANUAL
SELE
CT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL3Press to select MANUAL, and
press to set.
Make sure to leave
VCR off (overnight). In order for VCR to read PlusCode numbers,
some set up is required. Guide channel numbers
are assigned to each local broadcast and cable
station. Because this number sometimes differs
from channel TV receives station on, it is
necessary to program the VCR with local
channel information. To receive VCR Plus+
channels automatically, perform the steps below.
Or, see “Manual VCR Plus+ System Channel
Setup” section on page 7.
Press
to enter Zip Code and
enter each number.
Press
or ACTION to
set.
Important Note
“Connections/Initial Setup (Ready to Play)” on page 4 of “Basic Operations” book must be
completed before “Auto VCR Plus+ System Channel Setup” can be done. If any part of
setup is incomplete, a warning screen appears.
When Auto Set is performed, channels set
in initial setup (page 4 of “Basic
Operations” book) will be replaced by
automatically downloaded data.
Make each entry within 1 minute or VCR will
leave this mode.
Once local channels have been programmed,
they will stay in memory, even in the case of a
power failure.
If the start time for a timer recording comes up
during Auto VCR Plus+ System Setup, the
timer recording will have priority.
VCR Plus+ System is ...This feature sets most items of a Timer Recording when you enter a PlusCode programming
number found in TV GUIDE and selected newspaper TV listings.
Auto VCR Plus+ System Channel
Setup (Part 1)
For [VCR
➛ ➛➛ ➛
➛ TV] or [VCR
➛ ➛➛ ➛
➛ cable box
➛ ➛➛ ➛
➛ TV]
connection only.
1
2Press ACTION*
to display menu, and
Press
to select CHANNEL.
Press
to select VCR Plus+ CH
SET UP, and press to
set.
3Press to select AUTO SET,
and press to set.
SELECT :
EXIT : ACT I ON
VCR CLOCK CHANNELANTENNA : CABLE
AUTO SETWEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR CLOCK CHANNELANTENNA : CABLE
AUTO SETWEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELE
CT : SET :
EXIT : ACT I ON
AUTO SET
MANUAL
SELE
CT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
SELECT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
PLEASE ENTER Z I P CODE
Z I P CODE : -----
4
SELECT : SET :
EXIT : ACT I ON
PLEASE SELECT HOW OFTEN
TO UPDATE
R I GHT NOW
EVERY NIGHT
EVERY MONDAY NIGHT
VCR CLOCK CHANNEL5Press to select When to
Update, and press to
set.
6
END : ACT I ON
VCR CLOCK CHANNEL PLEASE LEAVE VCR OFF
Press ACTION to return
to normal screen.
Auto VCR Plus+ System Channel
Setup (Part 2)
Press to select
channel map for your
area, and press ADD/
DLT to set. Before you perform the following steps, you
should have:
completed “Auto VCR Plus+ System
Channel Setup (Part 1)” on left.
left VCR off overnight, and turned it back on
after 9:00 AM the next day.
If channel updatingwas successful...If VCR could notdistinguish channel map...
Press ACTION
to exit this mode.Press ACTION
to display SELECT
VCR Plus+ CH.
Continue with step 2.
Repeat these steps as necessary.
If Auto Setup fails, do “Manual VCR
Plus+ System Channel Setup” on page 7.
Channel map will be updated (overnight).
If it was successful, “VCR Plus+ CH SET
COMPLETED” appears on screen.
And then, press ACTION to exit.
1
END : ACT I ON
VCR CLOCK CHANNEL
VCR Plus+ CH SET
COMPLETED
END : ACT I ON
VCR CLOCK CHANNEL
PLEASE SELECT
VCR Plus+ CHANNEL
2VCR CLOCK CHANNEL SELECT VCR Plus+ CH
KABC CNN ESPN KNBC
12 13 14 15
51 42 18 33
1 5 10 7
101 99 110 78
SELE
CT :
SET : ADD / DLT
EXIT : ACT I ON
Make sure to leave
VCR off (overnight).
3
END : ACT I ON
VCR CLOCK CHANNEL PLEASE LEAVE VCR OFF
Press ACTION to return
to normal screen.
(E.g. you selected wrong channel map or zip code.)
bPress to select UPDATE VCR Plus+ CH
or SELECT VCR Plus+ CH, then press .
cIf you selected UPDATE VCR Plus+ CH,
perform steps 4~6 in the “Auto VCR Plus+
System Channel Setup (Part 1)” section on
above left.
If you selected SELECT VCR Plus+ CH,
perform steps 2~3 in the “Auto VCR Plus+
System Channel Setup (Part 2)” section on
above.
To Change or Update Auto VCR
Plus+ System Channel Setup
aDo “Auto VCR Plus+ System Channel Setup
(Part 1)” steps 1~3 on above left.
SELECT : SET :
EXIT : ACT I ON
VCR CLOCK CHANNEL
UPDATE VCR Plus+ CHSELECT VCR Plus+ CH
SEARCH
INDEX PROGRAM END
ENTER INDEX NUMBER :1
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCHEXIT :STOP SEARCH
INDEX PROGRAM END
SEARCH START :FF
EXIT :SEARCH
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Notes