Home > Panasonic > Video Recorder > Panasonic Video Cassette Recorder Ag1350 Operating Instructions

Panasonic Video Cassette Recorder Ag1350 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Video Cassette Recorder Ag1350 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Setting Up
    AUTO CHANNEL SET
           
    PROCEEDING
    END :  MENU
    2AUTO TUNING IS
    COMPLETED.
    END:  MENU
    Disappears    2
    3Select a program number on the TV which
    you wish to use as the video viewing
    channel. Then tune in the TV to the picture
    from the screen being auto tuned or the
    screen selected with the I and J buttons
    of the VCR.
    ≥During Auto Tuning, the TV program
    screen does not appear, and the Auto
    Tuning screen appears instead.
    To Cancel Auto Tuning Mid-
    Operation
    Press MENU during Auto Tuning. Auto Tuning
    is cancelled.
    To Restart Plug in Auto Tuning1Press EJECT < and remove the video
    cassette.
    2Keep the I and J buttons 
    on the VCR
    pressed simultaneously for 3 seconds or
    more during the VCR on.
    ≥The channel displayed on the VCR display
    disappears for a moment then changes to
    2.
    Display Symbol
    3Disconnect the mains lead and then
    reconnect it.
    4Turn off the VCR and then turn it on.
    Press VCR/TV to select the VCR mode.
    ≥Auto Tuning commences.If Auto Tuning stops halfway by turning the
    VCR off, playback or a power failure:
    1Disconnect the mains lead and then
    reconnect it.
    2Turn off the VCR and then turn it on.
    ≥Auto Tuning commences.
    To Change the RF Output
    Channel
    In some rare cases after tuning the TV to your
    VCR, interference may be visible on the
    picture. To get rid of this interference, you can
    manually adjust the RF output channel a few
    channels up and down from the current setting.
    The procedure is described below.
    1Hold down MENU for 5 seconds or more.
    ≥The VCR display changes as shown below
    and the VCR picture on the TV displays
    this pattern.
    2Enter the desired channel number (US3 or
    US4) by the I and J buttons.
    3()4
    3Press MENU to finish the setting mode.
    4Retune your TV to the new RF channel for
    the VCR.
    Note:
    ≥Even if the RF output channel has been
    changed, it is not necessary to perform Auto
    Tuning.
    Panasonic    VCR
    END:  MENU 
    						
    							12
    TV
    VCRVOLUME
    AV
    VCR/TV
    OSD/DISPLAY RESET/CANCEL
    PICTURE MODE 
    REC
    NAVI
    rW
    sX
    W
    X
    SEARCHINDEX
    OK AUDIO
    ∫
    13
    215 69¥ :
    Í Í
    ;/D
    MENU
    TIMERÁPROG./CHECKSPEED
    ONr r
    s sOFFr
    sDATEW
    X
    4
    1234
    JET REW
    DIRECT REC
    CH
    6
    ¥
    Storing T V Broadcasts in your VCR
    Auto Tuning Using the On
    Screen Display
    The VCR is tuned automatically by Plug in Auto
    Tuning. However, Auto Tuning using the On
    Screen Display should be performed according
    to the following method if necessary.
    Notes:
    ≥Auto Tuning searches for TV stations from
    VHF minimum to UHF maximum and
    memorizes every tuned program position.
    Other program positions are skipped.
    ≥Auto Tuning may take three or more minutes
    to complete its search.
    ≥If the VCR is not correctly tuned by Auto
    Tuning, follow the procedure on the next
    page.Preparations
    ≥Confirm that the TV is on and the VCR
    viewing channel is selected.
    ≥Turn on the VCR and select any program
    position except A1 or A2.
    ≥Press VCR/TV to select the VCR mode.
    Operations
    1Press MENU.
    2Select CHANNEL SET
    by pressing 3 or 4 and
    then press OK.
    3Select ANTENNA
    SYSTEM by pressing
    3 or 4 and then press
    OK.
    4Select the desired
    system by pressing 3 or
    4 and then press
    MENU.
    5Select AUTO by
    pressing 3 or 4 and
    then press OK.
    ≥When Auto Tuning is
    completed, the on
    screen display
    disappears and the
    lowest channel position
    at which a broadcast
    can be tuned in is
    received.
    AUTO CHANNEL SET
           
    PROCEEDING
    END         :MENU
    2
    LANGUAGE
    CLOCK SET
    ≥CHANNEL SET
    SELECT
    END:      , OK
    :MENUOSD MENU
    OPTION
    SELECT
    END:       
    :MENU
    CATV
    ANTENNA SYSTEM
    ≥TV
    ≥AUTO
    SELECT
    END:      , OK
    :MENU
    CHANNEL SETANTENNA SYSTEM
    MANUAL
    ≥LANGUAGE
    SELECT
    END:      , OK
    :MENUOSD MENU
    CLOCK SET
    CHANNEL SET
    OPTION
    SELECT
    END:      , OK
    :MENU
    CHANNEL SET
    ≥ANTENNA SYSTEM
    AUTO
    MANUAL
    On Screen Display 
    						
    							13
    Setting Up6Select CH by pressing 3 or 4 and then
    select the program position by pressing 2 or
    1.
    7Select BLANK by pressing 3 or 4 and then
    select ON or OFF by pressing 2 or 1.
    ≥To select the blanking of a program
    position, select ON.
    ≥Repeat steps 6 and 7 for another
    unoccupied program positions to skip
    during the selection of the program
    positions.
    8Press MENU three times.
    Manual System Setting
    Procedure
    Follow steps 1 to 4 on page 12.
    5Select MANUAL by pressing 3 or 4 and
    then press OK.
    AUTO
    SELECT
    END:      , OK
    :MENU
    CHANNEL SET
    ANTENNA SYSTEM
    ≥MANUAL
    Channel Plan
    TV mode
    CHANNEL
    DESIGNATIONS
    VHF
    UHF
    CHANNEL
    RECEIVED OF
    THE AIR
    2–13
    14–69
    CHANNEL
    SELECTION &
    INDICATION
    ON VCR
    2–13
    14–69
    CATV mode
    CHANNEL
    DESIGNATIONS
    BROADCASTVHF
    CATV LOW
    BAND
    CATV MID/
    SUPER
    BANDS
    CATV HYPER
    BAND
    ULTRA
    BAND
    SPECIAL
    CATV
    CHANNEL
    CHANNEL
    RECEIVED
    FROM CABLE
    2–13
    A-5–A-1
    A–W
    AA–FFF
    GGG–WWW
    WWWi1–
    WWWi12
    100–125
    5A
    CHANNEL
    SELECTION &
    INDICATION
    ON VCR
    2–13
    95–99
    14–36
    37–65
    66–94
    100–125
    1
    C H      2BLANK      ON  ≥OFF
    SELECT :          ∂/µ:
    END :MENU
    MANUAL CHANNEL SET
    C H      2
    BLANK      ON  ≥OFF
    SELECT :          ∂/µ:
    END :MENU
    MANUAL CHANNEL SET 
    						
    							14
    Operations
    1Press MENU.
    2Select CLOCK SET by
    pressing 3 or 4 and
    then press OK.
    3Set D.S.T. (Daylight
    Saving Time) by
    pressing 3 or 4.
    ≥Select YES to set daylight saving time. The
    time on the clock is advanced by 1 hour.
    ≥Select NO to return to standard time. The
    time on the clock is set back by 1 hour.
    ≥Press 1 to set each time.
    ≥Press MENU when not setting each time.
    Setting the Clock of your VCR
    The built-in digital clock is used to activate the
    timer for automatic recording and must be set
    to the correct time. It employs the 24-hour
    system.
    Preparations
    ≥Confirm that the TV is on and the VCR
    viewing channel is selected.
    ≥Turn on the VCR.
    ≥Press VCR/TV to select the VCR mode.
    Example:
    Date; 16 October (During daylight saving
    time), 2005
    Time; 20:15
    VCR
    VCR/TV
    OSD/DISPLAY RESET/CANCEL
    PICTURE MODE 
    REC
    NAVI
    W
    X
    SEARCHINDEX
    OK AUDIO
    ∫
    13
    215 69¥ :
    Í
    ;/D
    MENU
    TIMERÁPROG./CHECKSPEED4
    JET REW
    DIRECT REC6
    ¥
    4Set each item by pressing 3 or 4 and 1.
    Press 2 to return to the previous item.
    Set Year to “2005”.
    Set Month to “10”.
    Set Date to “16”.
    Set Time to “20:15”.
    ≥When it is kept
    pressed, the indication
    changes in 30-minute
    steps.
    ≥There is no need to
    press 1.
    ≥LANGUAGE
    SELECT
    END:      , OK
    :MENUOSD MENU
    LANGUAGE
    SELECT
    END:      , OK
    :MENUOSD MENU
    CHANNEL SET
    OPTION ≥CLOCK SETCLOCK SET
    CHANNEL SET
    OPTION
    M
    1Y
    2005D
     1H:M
     0:00  CLOCK SET
    START   :MENU SELECT:                      ∂/µ:
    D.  S.  T.         :  YES     ¡NO
    D.  S.  T.         :  YES     ≥NO
    Y
    2005CLOCK SET
    M
    10D
    16H:M
    20:15
    START   :MENUSELECT:                      s/r:
    D.  S.  T.         :  YES     ≥NO
    Y
    2005H:M
     0:00CLOCK SETM
    10D
    16
    START   :MENUSELECT:                      s/r:
    D.  S.  T.         :  YES     ≥NO
    M
    10Y
    2005D
     1H:M
     0:00CLOCK SET
    START   :MENUSELECT:                      s/r:
    D.  S.  T.         :  YES     ¡NO
    M
    1Y
    2005D
     1H:M
     0:00  CLOCK SET
    START   :MENU SELECT:                      s/r:
    Display Symbol
    5Press MENU.
    ≥The clock starts.
    Note:
    ≥The clock operates for at least 5 years on its
    backup system in the event of a power
    failure.
    Time Reset Function
    If the clock is less than two minutes slow or
    fast, it can easily be reset to the proper time.
    Example: Resetting the clock to 12:00.00
    1Select CLOCK SET from the OSD menu and
    press OK.
    2When the current clock display on the VCR
    is between 11:58.00 and 12:01.59, press
    MENU as soon as you hear the 12:00.00
    signal. This resets the time to 12:00.00. On Screen Display 
    						
    							15
    Setting Up
    TV
    VCRVOLUME
    AV
    VCR/TV
    OSD/DISPLAY RESET/CANCEL
    PICTURE MODE 
    REC
    NAVI
    rW
    sX
    W
    X
    SEARCHINDEX
    OK AUDIO
    ∫
    13
    215 69¥ :
    Í Í
    ;/D
    MENU
    TIMERÁPROG./CHECKSPEED
    ONr r
    s sOFFr
    sDATEW
    X
    4
    1234
    JET REW
    DIRECT REC
    CH
    6
    ¥
    Settings Using the On Screen
    Display
    Preparations
    ≥Confirm that the TV is on and the VCR
    viewing channel is selected.
    ≥Turn on the VCR.
    ≥Press VCR/TV to select the VCR mode.
    On Screen Display1Press MENU.
    2Select OPTION by
    pressing 3 or 4 and
    then press OK.
    3Select OSD by pressing
    3 or 4.
    4Select ON or OFF by
    pressing 2 or 1.
    ON: The on screen display will appear on
    the TV screen for 5 seconds.
    ≥The on screen display will always appear
    on the TV screen during rewind and
    Jet Rewind and fast forward.
    OFF: The on screen display will not appear.
    5Press MENU twice to make the on screen
    display disappear.
    To Use the On Screen DisplayPress OSD/DISPLAY.
    1Program position
    2Tape running display
    Stop, Eject
    Rewind, Review,
    Index Search :,
    6
    Jet Search 6,
    Jet Rewind
    Fast forward, Cue,
    Index Search 9,5
    Jet Search 5
    Playback1
    Recording¥
    Recording pauseM
    Repeat playback R 1
    3Present time/Tape counter/Remaining
    tape time/Index search/Jet Rewind
    Information Display
    Present time 17:24
    Tape counterj2:35.47
    Remaining tape time REMAIN 2:34
    Index search S 01
    Jet Rewind J:REW
    Press RESET/CANCEL to reset the tape
    counter (elapsed time) to “0:00.00”.
    ≥The tape counter is automatically reset to
    “0:00.00” when a video cassette is
    inserted.
    4Cassette-in indicator
    CH 1
    123
    4
    0:00.22
    SP     
    6
    5
    STANDARD
    LANGUAGE
    CLOCK SET
    CHANNEL SET
    SELECT
    END:      , OK
    :MENUOSD MENU
    ¡OPTION
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    (continues on the next page) 
    						
    							16
    For the Blue Background
    Function
    When BLUE BACK is ON, the screen will
    always have a blue background when you play
    back the unrecorded portions.
    Follow steps 1 to 2 on page 15.
    3Select BLUE BACK by
    pressing 3 or 4.
    4Select ON or OFF by
    pressing 2 or 1.
    ≥When BLUE BACK is OFF, the blue
    background function is deactivated.
    ≥It is not possible to record the blue picture
    of the blue background function.
    5Press MENU twice to make the on screen
    display disappear.
    For the Jet Navigator FunctionFollow steps 1 to 2 on page 15.
    3Select JET NAVIGATOR
    by pressing 3 or 4.
    4Select ON or OFF by
    pressing 2 or 1.
    ≥When JET NAVIGATOR is ON, 
    appears on the VCR display and Jet
    Navigator function works.
    5Press MENU twice to make the on screen
    display disappear.
    ≥See pages 28–30 for details on the Jet
    Navigator function. 3Select TAPE SELECT
    by pressing 3 or 4.
    4Select the corresponding
    video cassette tape
    length by pressing 2 or
    1.
    T120: For T30, -60, -90 and -120 tapes.
    T160: For T140 and -160 tapes.
    T180: For T180 tape.
    5Press MENU twice to make the on screen
    display disappear.
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    OSD≥ON OFF
    TAPE SELECT
    T120         ≥T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    5Tape speed indicator
    6Picture mode indicator
    At each press PICTURE MODE, the
    selected picture mode is set and following
    picture mode indicators appear.
    STANDARD: For TV program recorded
    DYNAMIC: For Scenery, Sports
    SOFT: For Rental soft tape
    CARTOON: For Cartoon
    Notes:
    ≥The on screen display may be disturbed
    depending on the playback tape or the input
    signal.
    ≥The on screen display does not appear when
    the OSD is set to OFF. Set the OSD to OFF
    for dubbing.
    To Select the Corresponding
    Video Cassette Tape Length to
    Display the Approximate
    Remaining Tape Time
    Follow steps 1 to 2 on page 15.
    On Screen Display 
    						
    							17
    Setting Up
    To Delete All the Jet Navigator
    Data Stored in the VCR’s
    Memory
    Follow steps 1 to 2 on page 15.
    3Select DELETE
    NAVIDATA by pressing
    3 or 4.
    4Select YES by pressing
    2 or 1 then press OK
    when you want to delete
    all the Jet Navigator
    data.
    5Press MENU twice to make the on screen
    display disappear.
    ≥See page 29 on the way to delete the Jet
    Navigator data of a single video cassette
    tape.
    To Select the Jet Search Speed
    in the EP mode
    Follow steps 1 to 2 on page 15.
    3Select JET SEARCH by
    pressing 3 or 4.
    4Select x27 or x35 by
    pressing 2 or 1.
    ≥It is possible to view the picture recorded in
    the EP mode at approx. 27 or 35 times
    speed.
    5Press MENU twice to make the on screen
    display disappear.
    ≥See page 20 for details on the Jet Search
    function.
    To Set to the Conditions for
    Direct Recording Function
    Follow steps 1 to 2 on page 15.
    3Select DIRECT REC by
    pressing 3 or 4.
    4Select ON or OFF by
    pressing 2 or 1.
    OFF: Initially set at this position.
    ON: This setting enables Direct Recording.
    AV Input (A1) becomes exclusive
    channel for Direct Recording.
    (See page 24.)
    5Press MENU twice to make the on screen
    display disappear.
    To Reduce the VCR’s Power
    Consumption When the VCR Is
    Switched Off.
    Follow steps 1 to 2 on page 15.
    3Select POWER SAVE by
    pressing 3 or 4.
    4Select ON or OFF by
    pressing 2 or 1.
    OFF: The power consumption is not
    reduced when the VCR is turned off.
    ON:   The power consumption is greatly
    reduced when the VCR is turned off.
    ≥When the VCR is set to the timer
    recording standby mode, the “Á”
    indication appears in the VCR display.
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA≥NO YES
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    OSD≥ON OFF
    TAPE SELECT
    ≥T120           T160 T180
    BLUE BACK≥ON OFF
    JET NAVIGATOR≥ON≥OFF
    DELETE NAVIDATA [ OK ]
    JET SEARCH x27≥x35 OPTION 1/2
    END              :MENU SELECT      :              s/r:
    DIRECT REC    ON≥OFF
    POWER SAVE≥ON OFF
     OPTION 2/2
    END              :MENU SELECT      :              s/r:
    DIRECT REC    ON≥OFF
    POWER SAVE≥ON OFF OPTION 2/2
    END              :MENU SELECT      :              s/r: 
    						
    							18
    To Select the Desired
    Language
    Select one of the four languages displayed:
    English, Spanish, Portuguese and French.
    1Press MENU.
    2Select LANGUAGE
    (IDIOMA) by pressing 3
    or 4 and then press
    OK.
    3Select the desired
    language by pressing 3
    or 4.
    4Press MENU twice to make the on screen
    display disappear.
    ≥ENGLISH ≥LANGUAGE
    CLOCK SET
    CHANNEL SET
    OPTION
    SELECT
    END:      , OK
    :MENU
    OSD MENU
    SELECT
    END:       
    :MENU
    LANGUAGE
    ESPAÑOL
    PORTUGUÊS
    FRANÇAIS
    On Screen Display 
    						
    							19
    Basic Operations
    Operations
    1Insert a recorded video
    cassette tape.
    2Start viewing the picture by
    pressing 1 (PLAY).
    3Search forward by tapping
    5 (FF). (Cue)
    ≥To change back to normal
    playback, press 1 (PLAY).
    4Search backward by
    tapping 6 (REW).
    (Review)
    ≥To change back to normal
    playback, press 1 (PLAY).
    5View a still picture by
    pressing ;/D (PAUSE/
    SLOW).
    ≥To continue normal
    playback, press 1 (PLAY)
    or ;/D (PAUSE/SLOW).
    6View a slow motion picture.
    ≥Keep ;/D (PAUSE/
    SLOW) pressed for
    2 seconds or more.
    ≥To continue normal
    playback, press 1 (PLAY).
    7Stop viewing the picture by
    pressing ∫ (STOP).
    TV
    VCRVOLUME
    AV
    VCR/TV
    OSD/DISPLAY RESET/CANCEL
    PICTURE MODE 
    REC
    NAVI
    rW
    sX
    W
    X
    SEARCHINDEX
    OK AUDIO
    ∫
    13
    215 69¥ :
    Í Í
    ;/D
    MENU
    TIMERÁPROG./CHECKSPEED
    ONr r
    s sOFFr
    sDATEW
    X
    4
    1234
    JET REW
    DIRECT REC
    CH
    6
    ¥
    4
    3
    7
    5,6 2
    Playback
    Display Symbols
    POWERJET REW
    PICTURE MODESEARCHTIMER RECÍ/ IÁEJECT
    REC/OTR6
    /6REW5/5FF
    STOP PLAY
    1
    72
    43
    Note:
    ≥If you keep 5 (FF) or 6 (REW) pressed in step 3 or 4, search playback is activated while the
    button is pressed, and operation returns to normal playback when the button is released. 
    						
    							20
    VCR
    VCR/TV
    OSD/DISPLAY RESET/CANCEL
    PICTURE MODE 
    REC
    NAVI
    sX
    W
    X
    SEARCHINDEX
    OK AUDIO
    ∫
    13
    215 69¥ :
    Í
    ;/D
    MENU
    TIMERPROG /CHECKSPEED4
    JET REW
    DIRECT REC6
    Other Playback Functions
    To Stop Playback Automatically
    (Playback Off Timer Function)
    If you set the playback duration, the playback
    will stop automatically.
    After the set playback time has elapsed, the
    VCR automatically stops playback and
    switches off.
    To Activate the Playback Off Timer Function
    During normal playback, press 1 (PLAY) 
    on
    the VCR for more than 2 seconds to put the
    VCR in the Playback Off Timer mode.
    After that, press 1 (PLAY) 
    on the VCR
    repeatedly until the desired playback duration
    is displayed on the VCR display.
    Repeatedly pressing this button changes the
    indication in the following order:
    Counter display (normal playback mode)
    >30 (min.)>60 (min.)>90 (min.)
    >120 (min.)>180 (min.)>240 (min.)>
    Counter display (normal playback mode)
    ≥The VCR will automatically switch off when
    Play-Off Timer is completed. To turn the VCR
    on again, press POWER Í/I (VCR Í).
    Notes:
    ≥The Play-Off Timer function works during
    normal playback.
    ≥When the tape reaches its end during Play-
    Off Timer, the tape will be rewound to the
    start and the VCR will turn itself off.
    ≥Repeat Playback function does not work
    during Play-Off Timer.
    ≥Press ∫ (STOP) to stop midway.
    JET REW
    PICTURE MODEEJECT
    REC/OTR6
    /6REW5/5FF
    STOP PLAY
    CVC
    Fast-forwarding or Rewinding
    the Tape
    Press 5 (FF) or 6 (REW) in the stop
    mode.
    ≥To stop fast-forwarding or rewinding, press
    ∫ (STOP).
    To Obtain a Higher Speed
    Rewind (Jet Rewind)
    Press JET REW 6.
    The “J : REW” indication appears on the TV
    screen and VCR display. (except when the
    remaining tape time indication appears)
    ≥Depending on a cassette or an operating
    condition, the rewind speed may change
    somewhat.
    ≥The tape counter is reset to“0:00.00” when
    the tape is rewound to the beginning.
    ≥To stop Jet Rewind, press ∫ (STOP).
    To Obtain a Higher Speed
    Picture than Cue, Review
    (Jet Search)
    During playback, tap 5 (FF) or 6 (REW)
    twice.
    ≥Select search speed to view the picture
    recorded. (See page 17.)
    ≥The picture that appears in the EP mode at
    approx. 35 times speed may be disturbed.
    A vertical scroll may happen due to
    combination with the TV monitor.
    It is not a malfunction but if it happens,
    change to approx. 27 times speed.
    ≥The picture may not be in color or be
    distorted depending on TV.
    ≥Press 1 (PLAY) to cancel the Jet Search. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Video Cassette Recorder Ag1350 Operating Instructions