Panasonic Video Cassette Recorder Ag1340 Operating Instructions
Here you can view all the pages of manual Panasonic Video Cassette Recorder Ag1340 Operating Instructions. The Panasonic manuals for Video Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
11 Setting Up Cable Connection Cable-VCR-TV (For CATV/PAY Channels Recording/Playback) The VCR has an extended range, and can tune the Low-Band, Mid-Band, Super-Band, Hyper- Band, Ultra-Band, and Special cable channels (Channels A-5–A-1, A–W, AA–FFF, GGG– WWW, WWWr1–WWWr12, 100–125, 5A). Also, the VCR can tune to any of the 56 UHF channels (14–69). Refer to Storing TV Broadcasts in your VCR on page 15. BASIC Hook-UpSince the VCR can tune Mid and Super Bands, this connection will provide the reception of...
Page 12
12
TV
VCRVOLUME
AV
INPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
ONr
sOFFr
sDATErr
sWW
X
sX
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
13
4
215 69¥ :
Í Í
;/D
MENU
1234
2 1
RF
OUTIN
N (AV1) OUT
VIDEO
AUDIO
3
1
AUTO CHANNEL SET
PROCEEDING
END : MENU
2
Tuning the T V to your VCR
The VCR supplies a signal to the TV via the RF
coaxial cable on channel US3 or 4.
It is possible to view the video picture on your
TV in the same way that you watch TV
broadcasts.
If you have...
Page 13
![Page 13
13
Setting Up
AUTO CHANNEL SET
PROCEEDING
END : MENU
2AUTO TUNING IS
COMPLETED.
END: MENU
Disappears 2
3Select a program number on the TV which
you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the I and J buttons
of the VCR.
–During Auto Tuning, the TV program
screen does not appear, and the Auto
Tuning screen appears instead.
To Cancel Auto Tuning Mid-
Operation
Press [MENU] during Auto Tuning. Auto...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-12.png "Page 13
13
Setting Up
AUTO CHANNEL SET
PROCEEDING
END : MENU
2AUTO TUNING IS
COMPLETED.
END: MENU
Disappears 2
3Select a program number on the TV which
you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the I and J buttons
of the VCR.
–During Auto Tuning, the TV program
screen does not appear, and the Auto
Tuning screen appears instead.
To Cancel Auto Tuning Mid-
Operation
Press [MENU] during Auto Tuning. Auto...")
13
Setting Up
AUTO CHANNEL SET
PROCEEDING
END : MENU
2AUTO TUNING IS
COMPLETED.
END: MENU
Disappears 2
3Select a program number on the TV which
you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the I and J buttons
of the VCR.
–During Auto Tuning, the TV program
screen does not appear, and the Auto
Tuning screen appears instead.
To Cancel Auto Tuning Mid-
Operation
Press [MENU] during Auto Tuning. Auto...
Page 14
14 TV VCRVOLUME AV INPUT SELECTVCR/TV RESETOSD/DISPLAY PICTURE MODEREC TIMERÁ NAVI PROG/CHECKSPEED ONr sOFFr sDATErr sWW X sX W X SEARCH CANCEL INDEX OK AUDIO ∫ 13 4 215 69¥ : Í Í ;/D MENU 1234 Storing T V Broadcasts in your VCR Auto Tuning Using the On Screen Display The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary. Notes: –Auto Tuning searches for TV stations from VHF minimum to UHF...
Page 15
![Page 15
15
Setting Up
AUTO
SELECT
END: , OK
:MENU
CHANNEL SET
ANTENNA SYSTEM
≥MANUAL
Manual System Setting
Procedure
Follow steps 1 to 4 on page 14.
5Select [MANUAL] by pressing 3 or 4 and
then press [OK].
6Select [CH] by pressing 3 or 4 and then
select the program position by pressing 2 or
1.
7Select [BLANK] by pressing 3 or 4 and
then select [ON] or [OFF].
–To select the blanking of a program
position, select [ON].
–Repeat steps 6 and 7 for another
unoccupied program positions to skip
during the selection...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-14.png "Page 15
15
Setting Up
AUTO
SELECT
END: , OK
:MENU
CHANNEL SET
ANTENNA SYSTEM
≥MANUAL
Manual System Setting
Procedure
Follow steps 1 to 4 on page 14.
5Select [MANUAL] by pressing 3 or 4 and
then press [OK].
6Select [CH] by pressing 3 or 4 and then
select the program position by pressing 2 or
1.
7Select [BLANK] by pressing 3 or 4 and
then select [ON] or [OFF].
–To select the blanking of a program
position, select [ON].
–Repeat steps 6 and 7 for another
unoccupied program positions to skip
during the selection...")
15 Setting Up AUTO SELECT END: , OK :MENU CHANNEL SET ANTENNA SYSTEM ≥MANUAL Manual System Setting Procedure Follow steps 1 to 4 on page 14. 5Select [MANUAL] by pressing 3 or 4 and then press [OK]. 6Select [CH] by pressing 3 or 4 and then select the program position by pressing 2 or 1. 7Select [BLANK] by pressing 3 or 4 and then select [ON] or [OFF]. –To select the blanking of a program position, select [ON]. –Repeat steps 6 and 7 for another unoccupied program positions to skip during the selection...
Page 16
![Page 16
16
TV
VCRVOLUME
AV
INPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
ONr
sOFFr
sDATErr
sWW
X
sX
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
13
4
215 69¥ :
Í Í
;/D
MENU
1234
Language Setting of the On Screen
Display
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.To Select the Desired LanguageSelect one of the four languages displayed:
English, Spanish, Portuguese and French.
1Press [MENU]....](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-15.png "Page 16
16
TV
VCRVOLUME
AV
INPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
ONr
sOFFr
sDATErr
sWW
X
sX
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
13
4
215 69¥ :
Í Í
;/D
MENU
1234
Language Setting of the On Screen
Display
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.To Select the Desired LanguageSelect one of the four languages displayed:
English, Spanish, Portuguese and French.
1Press [MENU]....")
16 TV VCRVOLUME AV INPUT SELECTVCR/TV RESETOSD/DISPLAY PICTURE MODEREC TIMERÁ NAVI PROG/CHECKSPEED ONr sOFFr sDATErr sWW X sX W X SEARCH CANCEL INDEX OK AUDIO ∫ 13 4 215 69¥ : Í Í ;/D MENU 1234 Language Setting of the On Screen Display Preparations –Confirm that the TV is on and the VCR viewing channel is selected. –Turn on the VCR. –Press [VCR/TV] to select the VCR mode.To Select the Desired LanguageSelect one of the four languages displayed: English, Spanish, Portuguese and French. 1Press [MENU]....
Page 17
![Page 17
17
Setting Up
Setting the Clock of your VCR
The built-in digital clock is used to activate the
timer for automatic recording and must be set
to the correct time. It employs the 24-hour
system.
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.
Example:
Date; 16 October (During daylight saving
time), 2005
Time; 20:15
VCRAVINPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
rW
sX
W
X
SEARCH...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-16.png "Page 17
17
Setting Up
Setting the Clock of your VCR
The built-in digital clock is used to activate the
timer for automatic recording and must be set
to the correct time. It employs the 24-hour
system.
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.
Example:
Date; 16 October (During daylight saving
time), 2005
Time; 20:15
VCRAVINPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
rW
sX
W
X
SEARCH...")
17 Setting Up Setting the Clock of your VCR The built-in digital clock is used to activate the timer for automatic recording and must be set to the correct time. It employs the 24-hour system. Preparations –Confirm that the TV is on and the VCR viewing channel is selected. –Turn on the VCR. –Press [VCR/TV] to select the VCR mode. Example: Date; 16 October (During daylight saving time), 2005 Time; 20:15 VCRAVINPUT SELECTVCR/TV RESETOSD/DISPLAY PICTURE MODEREC TIMERÁ NAVI PROG/CHECKSPEED rW sX W X SEARCH...
Page 18
![Page 18
18
TV
VCRVOLUME
AV
INPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
rW
sX
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
13
4
215 69¥ :
Í Í
;/D
MENU
1234
Settings Using the On Screen
Display
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.
On Screen Display1Press [MENU].
2Select [OPTION] by
pressing 3 or 4 and
then press [OK].
3Select [OSD] by
pressing 3 or 4.
4Select [ON] or [OFF] by
pressing 2...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-17.png "Page 18
18
TV
VCRVOLUME
AV
INPUT SELECTVCR/TV
RESETOSD/DISPLAY
PICTURE MODEREC
TIMERÁ
NAVI
PROG/CHECKSPEED
rW
sX
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
13
4
215 69¥ :
Í Í
;/D
MENU
1234
Settings Using the On Screen
Display
Preparations
–Confirm that the TV is on and the VCR
viewing channel is selected.
–Turn on the VCR.
–Press [VCR/TV] to select the VCR mode.
On Screen Display1Press [MENU].
2Select [OPTION] by
pressing 3 or 4 and
then press [OK].
3Select [OSD] by
pressing 3 or 4.
4Select [ON] or [OFF] by
pressing 2...")
18 TV VCRVOLUME AV INPUT SELECTVCR/TV RESETOSD/DISPLAY PICTURE MODEREC TIMERÁ NAVI PROG/CHECKSPEED rW sX W X SEARCH CANCEL INDEX OK AUDIO ∫ 13 4 215 69¥ : Í Í ;/D MENU 1234 Settings Using the On Screen Display Preparations –Confirm that the TV is on and the VCR viewing channel is selected. –Turn on the VCR. –Press [VCR/TV] to select the VCR mode. On Screen Display1Press [MENU]. 2Select [OPTION] by pressing 3 or 4 and then press [OK]. 3Select [OSD] by pressing 3 or 4. 4Select [ON] or [OFF] by pressing 2...
Page 19
![Page 19
19
Setting Up
OSD≥ON OFF
TAPE SELECT
≥T120 T160 T180
BLUE BACK≥ON OFF
JET NAVIGATOR≥ON≥OFF
DELETE NAVIDATA≥NO YES
JET SEARCH x27≥x35 OPTION
END :MENU SELECT : s/r:
OSD≥ON OFF
TAPE SELECT
T120 ≥T160 T180
BLUE BACK≥ON OFF
JET NAVIGATOR≥ON≥OFF
DELETE NAVIDATA≥NO YES
JET SEARCH x27≥x35 OPTION
END :MENU SELECT : s/r:
6 Picture mode indicator
At each press [PICTURE MODE], the
selected picture mode is set and following
picture mode...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-18.png "Page 19
19
Setting Up
OSD≥ON OFF
TAPE SELECT
≥T120 T160 T180
BLUE BACK≥ON OFF
JET NAVIGATOR≥ON≥OFF
DELETE NAVIDATA≥NO YES
JET SEARCH x27≥x35 OPTION
END :MENU SELECT : s/r:
OSD≥ON OFF
TAPE SELECT
T120 ≥T160 T180
BLUE BACK≥ON OFF
JET NAVIGATOR≥ON≥OFF
DELETE NAVIDATA≥NO YES
JET SEARCH x27≥x35 OPTION
END :MENU SELECT : s/r:
6 Picture mode indicator
At each press [PICTURE MODE], the
selected picture mode is set and following
picture mode...")
19 Setting Up OSD≥ON OFF TAPE SELECT ≥T120 T160 T180 BLUE BACK≥ON OFF JET NAVIGATOR≥ON≥OFF DELETE NAVIDATA≥NO YES JET SEARCH x27≥x35 OPTION END :MENU SELECT : s/r: OSD≥ON OFF TAPE SELECT T120 ≥T160 T180 BLUE BACK≥ON OFF JET NAVIGATOR≥ON≥OFF DELETE NAVIDATA≥NO YES JET SEARCH x27≥x35 OPTION END :MENU SELECT : s/r: 6 Picture mode indicator At each press [PICTURE MODE], the selected picture mode is set and following picture mode...
Page 20
![Page 20
20
To Delete All the Jet Navigator
Data Stored in the VCR’s
Memory
Follow steps 1 to 2 on page 18.
3Select [DELETE
NAVIDATA] by pressing
3 or 4.
4Select [YES] by pressing
2 or 1 then press [OK]
when you want to delete
all the Jet Navigator
data.
5Press [MENU] twice to make the on screen
display disappear.
–See page 31 on the way to delete the Jet
Navigator data of a single video cassette
tape.
To Select the Jet Search Speed
in the EP mode
Follow steps 1 to 2 on page 18.
3Select [JET SEARCH] by
pressing 3...](http://img.usermanuals.tech/thumb/58/76110/w300_ag1340_en_om_d-19.png "Page 20
20
To Delete All the Jet Navigator
Data Stored in the VCR’s
Memory
Follow steps 1 to 2 on page 18.
3Select [DELETE
NAVIDATA] by pressing
3 or 4.
4Select [YES] by pressing
2 or 1 then press [OK]
when you want to delete
all the Jet Navigator
data.
5Press [MENU] twice to make the on screen
display disappear.
–See page 31 on the way to delete the Jet
Navigator data of a single video cassette
tape.
To Select the Jet Search Speed
in the EP mode
Follow steps 1 to 2 on page 18.
3Select [JET SEARCH] by
pressing 3...")
20 To Delete All the Jet Navigator Data Stored in the VCR’s Memory Follow steps 1 to 2 on page 18. 3Select [DELETE NAVIDATA] by pressing 3 or 4. 4Select [YES] by pressing 2 or 1 then press [OK] when you want to delete all the Jet Navigator data. 5Press [MENU] twice to make the on screen display disappear. –See page 31 on the way to delete the Jet Navigator data of a single video cassette tape. To Select the Jet Search Speed in the EP mode Follow steps 1 to 2 on page 18. 3Select [JET SEARCH] by pressing 3...