Panasonic Vdr M53pp Operating Instructions Manual

							- : Not available
Thank you for buying a Panasonic product. Please take the time to become familiar with the operating 
instructions and how it is set up. Keep this manual handy for future reference.
Printed on recycled paper.
VQT0R00-1
QR35665
M0205KZ-1035
Operating Instructions
DVD Video Camera
Model No.
VDR-M53PP
VDR-M55PP
VDR-M75PP
VDR-M95PP
VDR-M53PPVDR-M55PP
VDR-M75PPVDR-M95PP
Built-in Flash - -
USB -
Remote Controller -
PC Software -
The illustration shows VDR-M95PP.
For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
This manual was printed 
with soy based ink.
VDR-M95M75M55M53PP.book  Page 1  Tuesday, March 29, 2005  2:19 PM 
						

							2
Important Information
For Your Safety
The power switch turns the DVD Video Camera on and off, leaving the date/time feature unaffected. If the camera is to 
be left unattended for a long period of time, turn it off .
The DVD Video Camera and AC adaptor have the 
following caution marks.
CAUTION: TO REDUCE THE RISK OF 
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
Precautions
WARNING: Many television programs and films are 
copyrighted. In certain circumstances, copy-right 
law may apply to private in-home videotaping of 
copyrighted materials.Identifications of caution marks
This symbol warns the user that 
uninsulated voltage within the unit may 
have sufficient magnitude to cause 
electric shock. Therefore, it is 
dangerous to make any kind of contact 
with any inside part of this unit.
This symbol alerts the user that 
important literature concerning the 
operation and maintenance of this unit 
has been included. Therefore, it should 
be read carefully to avoid any problems. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE 
RECOMMENDED ACCESSORIES ONLY.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, BE 
SURE TO USE THE SPECIFIED AC 
ADAPTOR (VSK0677).
CAUTION
RISK OF ELECTRIC 
SHOCK 
DO NOT OPEN
The liquid crystal display (LCD) panel is made by 
highly precise technology. More than 99.99% of 
its picture elements (pixels) are effective, but 
some (less than 0.01%) may appear as colored 
bright dots. This does not indicate a fault as the 
LCD panel stretches the limits of current 
technology.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher 
class than 1. To ensure continued safety, do not 
remove any covers or attempt to gain access to 
the inside of the product. Refer all servicing to 
qualified personnel.
VDR-M95M75M55M53PP.book  Page 2  Tuesday, March 29, 2005  2:19 PM 
						

							3
Microsoft®, Windows®, Windows® 98, Windows® Me, Windows® 2000 Professional, Windows® XP Home 
Edition and Windows® XP Professional are registered trademarks of Microsoft Corporation.
Intel®, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
IBM® and PC/AT® are registered trademarks of International Business Machines Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each 
individual company.
SD logo is a trademark.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing. 
This product incorporates copyright protection technology that is protected by method claims of certain 
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights 
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and 
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision 
Corporation. Reverse engineering or disassembly is prohibited.
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use 
only shielded interface cables with ferrite core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could 
void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name:Panasonic
Model No.:VDR-M53PP / VDR-M55PP / VDR-M75PP / VDR-M95PP
Responsible party:Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:Panasonic Consumer Electronics Company
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1)This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.
This class B digital apparatus complies with CANADIAN ICES-003.
This Product has a fluorescent lamp that contains a small amount of mercury. It also contains 
lead in some components. Disposal of these materials may be regulated in your community 
due to environmental considerations. For disposal or recycling information please contact your 
local authorities, or the Electronics Industries Alliance: 
A lithium ion/polymer battery that is recyclable powers the product 
you have  purchased. Please call 1-800-8-BATTERY for information  
on how to recycle this battery.
U.S.A./CANADA CONSUMERS:  ATTENTION:
VDR-M95M75M55M53PP.book  Page 3  Tuesday, March 29, 2005  2:19 PM 
						

							4
Be sure to read the following before opening 
the CD-ROM package
This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided with this 
product, if you agree to the terms herein.
If you do not accept the terms of this Agreement, immediately return the unopened package of storage medium and 
enclosed materials (printed matter, external package, and all others) to your dealer, or return only the package of storage 
medium to your dealer.
This License Agreement certifies that you were granted license in the past.
License Agreement
Article 1 Grant of LicenseMatsushita Electric Industrial Co., Ltd. grants you the following rights for the following products (to be referred to as “This 
Software” hereafter) that you have obtained with this Agreement:
(a)  You may use This Software only on a single piece of equipment. However, if this equipment cannot be 
used because of mechanical problem, you may temporarily use This Software on another piece of 
equipment.
(b) Although This Software contains several components that can be run on computer as independent 
functions, all components are licensed as a single product: You may not, by any means, use these 
components on different computers at the same time.
Article 2 Copyrights
The copyrights of This Software, attached manual, etc. are owned by the following corporations, and are protected by 
copyright laws in Japan and USA, as well as by other intellectual property and international properties:
Article 3 Other Rights and Limitations(a)  You may not copy This Software or any of the printed materials attached, except for duplications to provide back-up 
or storage.
(b)  Use of This Software by third parties is prohibited, whether by transferring, renting, leasing, lending, moving, or any 
other measures.
(c)  You may not decompile or disassemble this Software.
(d) Duplication and/or distribution of any files on this storage medium for commercial use is prohibited.
Article 4 Quality AssuranceUnder no circumstances will Matsushita Electric Industrial Co., Ltd. accept any responsibility for any damage you may 
incur from using or being unable to use This Software (including, but not limited to, loss of business profit, interruption of 
business, loss of business information, or other monetary damages).
Article 5 Termination of AgreementIf you fail to comply with the terms of this Agreement, Matsushita Electric Industrial Co., Ltd. reserves the right to terminate 
the Agreement. In such a case, you will be obliged to discard all copies of This Software and its components.
Article 6 Prioritized License AgreementWhen some software programs are installed, the license agreements will be displayed (to be referred to as online license 
agreement). 
If the online license agreement conflicts with this Agreement, the online license agreement shall have a priority.
Name of SoftwareCopyright Owners
DVD-RAM Driver Matsushita Electric Industrial Co., Ltd.
DVD-MovieAlbumSE/DVDfunSTUDIO Matsushita Electric Industrial Co., Ltd.
VDR-M95M75M55M53PP.book  Page 4  Tuesday, March 29, 2005  2:19 PM 
						

							5
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major 
factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD Video Camera and 
accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future 
reference.
INSTALLATION1Read and Follow Instructions — All the safety and 
operating instructions should be read before the video 
product is operated. Follow all operating and use 
instructions.
2Retain Instructions — The safety and operating 
instructions should be retained for future reference.
3Heed Warnings — Comply with all warnings on the 
video product and in the operating instructions.
4Power Sources — This video product should be 
operated only from the type of power source indicated 
on the marking label. If you are not sure of the type of 
power supply to your home, consult your video dealer 
or local power company. For video products intended 
to operate from battery power, or other sources, refer 
to the operating instructions.
5Overloading — Do not overload 
wall outlets and extension cords 
as this can result in a risk of fire or 
electric shock. Overloaded AC 
outlets and extension cords are 
dangerous, and so are frayed 
power cables, damaged or 
cracked wire insulation and 
broken plugs. They may result in 
a shock or fire hazard. Periodically examine the cord 
and have it replaced by your service technician if 
appearance indicates damage or deteriorated 
insulation.
6Power-Cord Protection — Power-supply cords 
should be routed so that they are not likely to be walked 
on or pinched by items placed upon or against them, 
paying particular attention to cords at plugs, 
convenience receptacles, and the point where they 
exit from the appliance.
7Venti la tion — Slots and openings in the cabinet are 
provided for ventilation to ensure reliable operation of 
the video product and to protect it from overheating. 
These openings must not be blocked or covered. The 
openings should never be blocked by placing the video 
product on a bed, sofa, rug, or other similar surface. 
This video product should never be placed near or over 
a radiator or heat register. This video product should 
not be placed in a built-in installation such as a 
bookcase or rack unless proper ventilation is provided 
or the video product manufacturers instructions have 
been followed.
8Attachments — Do not use attachments unless 
recommended by the video product manufacturer as 
they may cause hazards.
Caution: Maintain electrical safety. Powerline operated 
equipment or accessories connected to this unit should 
bear the UL listing mark or CSA certification mark on the 
accessory itself and should not have been modified so as 
to defeat the safety features. This will help avoid any 
potential hazard from electric shock or fire. If in doubt, 
contact qualified service personnel.
9Water and Moisture — Do not use this video product 
near water — for example, near a bath tub, wash bowl, 
kitchen sink, or laundry tub, in a wet basement, or near 
a swimming pool, and the like.
10Accessories — Do not place this video product on an 
unstable cart, stand, tripod, bracket, or table. The 
video product may fall, causing serious injury to a child 
or adult, and serious damage to the appliance. Use 
only with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold with the 
video product. Any mounting of the product should 
follow the manufacturers instructions, and should use 
a mounting accessory recommended by the 
manufacturer.
kawaii konekoMOMOkey to chisemekoalbumcat book
mother
dietZoo Docter
Part 1Zoo Docter
Part 2sasaki akemihirayamo akikohorie youji chikako kimioauto moterkabushiki
mitoniikikatayakamashiiigarashiWhy?
kuro
abcdfevcdsz
kusanomitonokakuraitadashiigenkoutadashiigenkouoomori matudanurieyohsinarish yohsinarishashin
mitonamemekogaikiteitamito
momogatoiredemizubitashialbum
mame
1funga funga funga funga
funga funga fungametsuki
123 nyanko
1midori
3 okubyo
2mother
Part2tomodachi
3junkaikun
2 momo
3 momo
2 momo
1 ebisu
2 ebisu
1 key
5 key
4 key
3 key
2 key
1 chise
5 chise
4 chise
3 chise
2 chise
1
VDR-M95M75M55M53PP.book  Page 5  Tuesday, March 29, 2005  2:19 PM 
						

							6
11An appliance and cart combination 
should be moved with care. Quick 
stops, excessive force, and uneven 
surfaces may cause the appliance 
and cart combination to overturn.
12Power Lines — An outside antenna system should 
not be located in the vicinity of overhead power lines or 
other electric light or power circuits, or where it can fall 
into such power lines or circuits. When installing an 
outside antenna system, extreme care should be 
taken to keep from touching or approaching such 
power lines or circuits as contact with them might be 
fatal. Installing an outdoor antenna can be hazardous 
and should be left to a professional antenna installer.
USE13Cleaning — Unplug this video product from the wall 
outlet before cleaning. Do not use liquid cleaners or 
aerosol cleaners. Use a damp cloth for cleaning.
14Object and Liquid Entry — Never push objects of any 
kind into this video product through openings as they 
may touch dangerous voltage points or short-out 
parts, which could result in a fire or electric shock. 
Never spill liquid of any kind on the video product.
15Lightning — For added protection for this video 
product during a lightning storm, or when it is left 
unattended and unused for long periods of time, 
unplug it from the wall outlet and disconnect the 
antenna or cable-system. This will prevent damage to 
the video product due to lightning and power-line 
surges.
SERVICE16Servicing — Do not attempt to service this video 
product yourself as opening or removing covers may 
expose you to dangerous voltage or other hazards. 
Refer all servicing to qualified service personnel.
17Conditions Requiring Service — Unplug this video 
product from the wall outlet and refer servicing to 
qualified service personnel under the following 
conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into 
the video product.
c. If the video product has been exposed to rain or 
water.
d. If the video product does not operate normally by 
following the operating instructions. Adjust only 
those controls that are covered by the operating 
instructions. Improper adjustment of other controls 
may result in damage and will often require 
extensive work by a qualified technician to restore 
the video product to its normal operation.
e. If the video product has been dropped or the casing 
has been damaged.
f. When the video product exhibits a distinct change 
in performance — this indicates a need for service.
18Replacement Parts — When replacement parts are 
required, have the service technician verify that the 
replacements he uses have the same safety 
characteristics as the original parts. Use of 
replacements specified by the video product 
manufacturer can prevent fire, electric shock or other 
hazards.
19Safety Check — Upon completion of any service or 
repairs to this video product, ask the service 
technician to perform safety checks recommended by 
the manufacturer to determine that the video product 
is in safe operating condition.
20Heat — The product should be situated away from 
heat sources such as radiators, heat registers, stoves, 
or other products (including amplifiers) that produce 
heat.
VDR-M95M75M55M53PP.book  Page 6  Tuesday, March 29, 2005  2:19 PM 
						

							7
Cautions When Using
Handle the liquid crystal display (LCD) with care:
•The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp
object.
If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn
the DVD Video Camera off, wait for a few moments, and then turn it on again.
Do not place the DVD Video Camera with the open LCD screen down.
Close the LCD monitor when not using the DVD Video Camera.
IMPORTANT  NOTE
Liquid crystal display and viewfinder:
The LCD screen and viewfinder are the products of highly precise technology. Among the total number
of pixels (approx. 120,000 pixels for LCD monitor and approx. 200,000 pixels for viewfinder), 0.01% or
less pixels may be missing (black dots) or may remain lit as colored dots (red, blue, green). This shows
the limitations of the current technology, and does not indicate a fault that will interfere with recording.
The LCD screen and viewfinder will be slightly dimmer than usual when the DVD Video Camera is at low
temperature, as in cold areas, or immediately after power is turned on. Normal brightness will be restored
when the temperature inside the DVD Video Camera rises.
The following characteristics may appear in the viewfinder.
−The colors seen in the viewfinder may appear different from the colors on the LCD monitor.
−Text appears slightly fuzzy.
−The edges of the subject appear glaring.
−Iridescence momentarily occurs when you move the observation point along with the motion of the 
subject.
Note that the foregoing phenomena have no effect on the image in a disc or card, so there is no cause 
for concern.
Hold the DVD Video Camera correctly:
Do not hold the DVD Video Camera by the viewfinder or LCD monitor when lifting it: the viewfinder or LCD
monitor could detach and the DVD Video Camera may fall.
Do not subject the DVD Video Camera to impact:
This DVD Video Camera is a precision machine. Take great care that you do not strike it against a hard
object or let it fall.
Do not use the DVD Video Camera on a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
Fine sand or dust entering the DVD Video Camera or AC adaptor could cause malfunctions or defects.
No water or oil!
Water or oil entering the DVD Video Camera or AC adaptor could cause electric shock,
 malfunctions or defects.
VDR-M95M75M55M53PP.book  Page 7  Tuesday, March 29, 2005  2:19 PM 
						

							8
Heat on surface of product:
The surface of the DVD Video Camera will be slightly warm, but this does not indicate a fault. 
Screen on connected TV:
Never leave the disc navigation screen, still image or camera image displayed on your TV to which the
DVD Video Camera is connected: Doing so could result in displayed image retention or phosphor
degradation of TV screen.
Be careful of ambient temperature:
Using the DVD Video Camera in a place where the temperature is over 140°F (40°C) or under 32°F (0°C)
will result in abnormal recording/playback.
Take care that the temperature of this DVD Video Camera, when connected to a PC, does not rise
excessively (reference for usage: approx. 30 minutes at about 86°F (30°C).
Do not leave the DVD Video Camera on a beach or in a closed vehicle where the temperature is very
high for a long time: This could cause malfunctions.
Do not point directly at the sun:
If direct sunlight strikes the lens or viewfinder, the DVD Video Camera could malfunction or a fire could
occur.
Do not leave the DVD Video Camera with the LCD screen exposed to direct sunlight: This could cause
malfunctions.
Do not use the DVD Video Camera near TV or radio:
This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD Video Camera near strong radio waves or magnetism:
If the DVD Video Camera is used near strong radio waves or magnetism, such as near a radio wave tower
or electric appliances, noise could enter video and audio that are being recorded. During playback of
normally recorded video and audio, noise may also be present in picture and sound. 
At worst the DVD Video Camera could malfunction.
Do not expose the DVD Video Camera to soot or steam:
Thick soot or steam could damage the DVD Video Camera case or cause malfunctions.
Do not use the DVD Video Camera near corrosive gas:
If the DVD Video Camera is used in a place where there is dense exhaust gas generated by gasoline
or diesel engines, or corrosive gas such as hydrogen sulfide, the external or internal terminals could
corrode, disabling normal operation, or the battery connecting terminals could corrode, so that power will
not turn on.
Do not use the DVD Video Camera near ultrasonic humidifier:
Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere
to the optical head of the DVD Video Camera, which could cause it to operate abnormally.
Do not expose the DVD Video Camera to insecticide:
Insecticide entering the DVD Video Camera could dirty the lens in the laser pickup block, and in such a
case the DVD Video Camera might not operate normally. Turn the DVD Video Camera off and cover it
with vinyl sheet, etc. before using insecticide.
Do not use an optional 8 cm CD lens cleaner:
Cleaning the lens is not necessary when using this DVD Video Camera in the usual way.
Using 8 cm CD lens cleaner could cause this DVD Video Camera to malfunction.
Do not touch the lens in laser pickup block.
If you touch the lens in the laser pickup block directly it may cause malfunctions. Laser pickup block is
not a compensable part. Therefore, pay much attention when operating this camera.
VDR-M95M75M55M53PP.book  Page 8  Tuesday, March 29, 2005  2:19 PM 
						

							9
Be careful of moisture condensation:
When you move the DVD Video Camera between places where the difference in temperatures is great
- such as entering a lodge from a ski slope or going out of a cooled room or vehicle - condensation (vapor
in air warmed or cooled to water droplets) could occur on the lens and/or inside the DVD Video Camera.
If condensation occurs, do not open the cover of disc or card insertion block if possible. If condensation
occurs on the lens, wipe it off with a soft, dry cloth. Even if the external surface of DVD Video Camera
has dried, condensation may remain inside: Turn the DVD Video Camera off and leave it in a dry place
for at least 1-2 hours before using it again.
Do not use the DVD Video Camera for a long, uninterrupted period of time:
This DVD Video Camera cannot be used for a long time continuously as a surveillance camera/monitor.
If you use the DVD Video Camera for a long continuous period of time, the temperature of the DVD Video
Camera could exceed its proper limit and the recording/playback operation could be slowed down: In this
case, turn it off and wait for a while before using it again.
Take care that the temperature of this DVD Video Camera, when connected to a PC, does not rise
excessively [reference for usage: approx. 30 minutes at about 86°F (30°C).]
Do not turn the DVD Video Camera off while the ACCESS/PC indicator* or CARD 
ACCESS indicator is lit or blinking:
The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card,
or being read from it.  At this time, do not do any of the
following, so as not to damage the data:
−Remove battery pack
−Disconnect AC adaptor
−Plug or unplug USB cable
−Remove disc or card
−Subject DVD Video Camera to severe vibrations or 
impact.
−Forcefully open or close the LCD monitor
If you turn the DVD Video Camera off while the ACCESS/PC or CARD ACCESS indicator is lit or blinking, 
turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed automatically 
(see page 151).
Do not wipe the DVD Video Camera case with benzene or thinner:
The coating of case could peel off or the case surface could deteriorate.
When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, observe the cautions and follow instruction manuals attached.
Keep the Memory Card out of reach of children to prevent swallowing.
ACCESS/PC 
indicator*
CARD ACCESS 
indicator
* ACCESS indicator (VDR-M53PP)
Labeled “ACCESS/PC indicator” in this manual. 
VDR-M95M75M55M53PP.book  Page 9  Tuesday, March 29, 2005  2:19 PM 
						

							10
Cautions When Storing
Do not leave the DVD Video Camera in a place where the temperature is very high for a 
long period of time:
The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the
DVD Video Camera in such a place, it could malfunction or the case could be damaged. Do not expose
the DVD Video Camera to direct sunlight or place it near a heater.
Do not store the DVD Video Camera in a place where the humidity is high or in a dusty 
place:
Dust entering the DVD Video Camera could cause malfunctions. If humidity is high, the lens could
become moldy, and the DVD Video Camera could become inoperative. It is recommended that you put
the DVD Video Camera in a box together with a desiccant when storing it in a closet, etc.
Do not store the DVD Video Camera in a place subject to strong magnetism or intense 
vibrations:
This could cause malfunctions.
Detach the battery pack from the DVD Video Camera and store it in a cool place:
Leaving the battery pack attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
Always make a trial recording before doing actual recording to make sure that recording is normal. 
Data that have not been stored normally because of a defect in the DVD Video Camera cannot be
restored.
It is recommended that you use a DVD-RAM disc from which recorded contents can be deleted for trial
recording.
Do not use the DVD Video Camera for professional applications:
This DVD Video Camera is designed and produced for home-use recording and playback. 
The recorded contents cannot be compensated for:
Panasonic cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD Video Camera, disc or card.
Also, Panasonic cannot be responsible for your recorded video and audio.
If you or a third party makes a mistake when handling this DVD Video Camera, disc, card, etc., the
recorded contents may be lost. We cannot be responsible for compensation for damages due to loss of
recorded contents.
Copyright:
Data recorded on the disc or card in this DVD Video Camera using other digital/analog media or devices
is protected by the copyright act and cannot be used without permission of the owner of copyright, except
for personal enjoyment. Be aware that recording is restricted for some demonstrations, performances
and exhibitions, even for personal enjoyment.
VDR-M95M75M55M53PP.book  Page 10  Tuesday, March 29, 2005  2:19 PM