Panasonic Vdr D220 Operating Instructions Manual

51LSQT1146
Recording
When you start recording, the image/audio 
gradually appears.
Pause recording. (Fade out)
The image/audio gradually disappears. After the 
image/audio completely disappears, recording 
stops.
≥After recording, the fade setting is canceled.
To cancel fading
Select [ ] again.
To select the color for fade in/out
The color which appears in fading pictures can 
be selected.
Press the MENU button, then select 
[ADVANCED] # [FADE COLOR] # [WHITE] or 
[BLACK] and press the joystick.
≥If you...

52LSQT1146
Recording
1Press the joystick. Then move 
the joystick down to display the 
icon shown in the illustration.
2Move the joystick up to select 
[].
≥If it is difficult to focus, adjust the focus 
manually. (l55)
To cancel the MagicPix function
Select [ ] again.
≥The MagicPix function makes the signal 
charging time of CCD up to approximately 30k 
longer than usual, so that dark scenes can be 
recorded brightly. For this reason, bright dots 
that are usually invisible may be seen, but this 
is not...

53LSQT1146
Recording
Press the MENU button, then select 
[BASIC] # [GUIDE LINES] # [ON] 
and press the joystick.
To cancel the Recording guideline 
function
Press the MENU button, then select [BASIC] # 
[GUIDE LINES] # [OFF] and press the joystick.
≥The guidelines do not appear on the images 
actually recorded.
≥The guidelines are not displayed while rotating 
the LCD monitor frontward to record yourself.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
This allows you to record images compatible with 
wide-screen TVs...

54LSQT1146
Recording
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
¬Rotate the mode dial to select  .
Press the MENU button, then select 
[ADVANCED] # [WIND CUT] # [ON] 
and press the joystick.
To cancel the wind noise reduction 
function
Press the MENU button, then select 
[ADVANCED] # [WIND CUT] # [OFF] and 
press the joystick.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind 
strength. (If this function is activated in strong 
winds, the stereo effect may be reduced. When 
the...

55LSQT1146
Recording
Sports mode
≥For slow-motion playback or playback pause of 
recorded pictures, this mode helps diminish 
camera shake.
≥During normal playback, the image movement 
may not look smooth.
≥Avoid recording under fluorescent light, 
mercury light or sodium light because the color 
and brightness of the playback image may 
change.
≥If you record a subject illuminated with strong 
light or a highly reflective subject, vertical lines 
of light may appear.
≥If the brightness is insufficient,...

56LSQT1146
Recording
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The automatic white balance function may not 
reproduce natural colors depending on the 
scenes or lighting conditions. If so, you can 
adjust the white balance manually.
¬Rotate the mode dial to select   or 
.
1Set the AUTO/MANUAL/FOCUS 
switch to MANUAL.
The icon shown in the illustration is displayed 
automatically.
2Move the joystick up to select 
[].
3Move the joystick left or right to 
select the white balance mode.
To restore to the automatic...

57LSQT1146
Recording
∫About the white balance sensor A
The white balance sensor detects the type of 
light source during recording.
Do not cover the white balance sensor during 
recording, or it may not function properly.
≥When the unit is turned on with the lens cap 
attached, the automatic white balance 
adjustment may not function properly. Please 
turn the unit on after removing the lens cap.
≥When the [ ] display flashes, the manual 
white balance previously adjusted is stored.
Whenever recording...

58LSQT1146
Recording
≥If you increase the shutter speed manually, the 
gain value will increase automatically 
depending on how much the sensitivity lowers 
and the noise on the screen may increase.
≥You may see vertical lines of light in the 
playback image of a brightly shining subject or 
highly reflective subject, but this is not a 
malfunction.
≥During normal playback, image movement 
may not look smooth.
≥When recording in an extremely bright place, 
the screen may change color or flicker. If so...

Playback
59LSQT1146
Playback
Motion picture playback
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Play back the motion pictures recorded on the disc.
1Rotate the mode dial to select  .
The motion pictures recorded on the disc are 
displayed as thumbnails.
2Select the scene to be played back.
AScene number
BScroll bar display
The selected scene will be encircled by a yellow frame.
≥When 9 or more scenes have been recorded, the next (or previous) 
page is displayed by moving the joystick.
≥If you move and hold the...

Playback
60LSQT1146
≥The time displayed may be different from the recording time and it may take time to display the 
thumbnail display when playing back motion pictures recorded on another product.
≥The recording time is not displayed on the screen during playback of scenes recorded on other 
products.
Move and hold the joystick right during playback until 
fast-forward starts.
(Move and hold the joystick left to rewind.)
≥Move the joystick again to increase the speed.
≥Normal playback is restored when...