Panasonic Vdr D105 Operating Instructions Manual

11LSQT1040
Before using
Quick Guide
Quick Guide
∫Charging the battery
1 Connect the AC cable to the AC adaptor 
and the AC outlet.
2 Put the battery on the battery mount by 
aligning the mark, and then securely 
plug it in.
∫Fitting the battery
Push the battery against the battery holder 
and slide it until it clicks.
∫Removing the battery
While sliding the BATTERY RELEASE lever, 
slide the battery to remove it.
∫How to turn on/off the power
While pressing the button A, set the OFF/
ON switch to ON/OFF....

12LSQT1040
Before using
Quick Guide
∫Recording motion pictures
≥Rotate the mode dial to select  .
1 Press the recording start/stop button to 
start recording.
2 Press the recording start/stop button 
again to pause recording.
∫Motion picture playback
≥Rotate the mode dial to select  .
1 Select the scene to be played back.
2 Press the joystick.
3 Move the joystick to operate.
1/;: Playback/Pause
:(Move): Skip playback (backward)
:(Move and hold): Review playback
9(Move): Skip playback (forward)
9(Move and...

13LSQT1040
Before using
Accessories
Accessories
Check the accessories before using this unit.
∫To download the DVD-RAM Driver from the website
If your computer is able to connect to the Internet, you can download the DVD-RAM Driver from the 
website below.
http://www.panasonic.com/consumerdownloads
1) Download the DVD-RAM Driver software and execute it.
2) Follow the on-screen instructions for installation and reboot the computer after installation is 
complete.
≥Use the supplied USB cable when...

14LSQT1040
Before using
Parts identification and handling
Parts identification and handling
1Lens
2 Microphone (built-in, stereo)
3 White balance sensor (l51)
4 Terminal cover
5 Audio-video output terminal [A/V] (l74, 77)
6 Video light (l46)
7 USB terminal [ ]
8 Viewfinder (l17, 34)
9 LCD monitor open button [PUSH OPEN] (l17)
10 Video light button [LIGHT] (l46)
11 DC input terminal [DC/C.C. IN] (l24)
12 Recording start/stop button (l36)
13 Power switch [OFF/ON] (l24)
14 Status indicator (l24)
15 Mode...

15LSQT1040
Before using
Parts identification and handling
24 Reset button [RESET] (l88)
25 LCD monitor (l17)
26 Mode select switch [AUTO/MANUAL/FOCUS] 
(l47)
27 Speaker
28 Disc eject lever [DISC EJECT] (l25)
29 Disc access lamp [ACCESS/PC] (l25)
30 Disc compartment (l25)
31 Grip belt (lbelow)
32 Shoulder strap fixture (lbelow)
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad position.
1Flip the belt.
2Adjust the length.
3Fix the belt.
Put the strap through the fixture 1 and...

16LSQT1040
Before using
Parts identification and handling
Fit the lens cap to protect the surface of the lens.
The lens cap and lens cap cord comes preattached to the grip belt.
≥When not using the lens cap, pull the lens 
cap cord in the direction of the arrow. A
≥When you are not recording, be sure to 
cover the lens with the lens cap for 
protection. B
≥When you remove the lens cap, press the knobs firmly.
≥If the lens cap cord has come off
Pass the end of the lens cap cord through the attached eye...

17LSQT1040
Before using
Parts identification and handling
You can record the image while viewing it on the LCD monitor.
1 Press the PUSH OPEN button. The LCD 
monitor opens slightly.
Pull the LCD monitor out in the direction of 
the arrow.
≥The viewfinder is now deactivated.
≥It can open up to 90o.
2 Adjust the angle of the LCD monitor according to your preference.
≥It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.
≥The brightness and color level of the LCD monitor 
can be...

18LSQT1040
Before using
Discs
Discs
Discs that can be used on this unit
DIsc typeDVD-RAM
8 cm (3z)
Single sided/
double sidedDVD-RW
8 cm (3z)
Single sided/double sidedDVD-R
8 cm (3z)
Single sided/
double sided
(DVD-RAM 
Ver. 2.1)[DVD-RW Ver. 1.1/
2X-SPEED (2X/1X)](DVD-R for 
General Ver. 2.0)
Recording formatDVD Video 
Recording 
format
(VR format)DVD Video 
Recording 
format
(VR format)DVD-Video 
format
(Video format)DVD-Video 
format
(Video format)
CharacteristicRewritable disc Rewritable 
discOne time...

19LSQT1040
Before using
Discs
≥Still pictures cannot be recorded on a disc with this unit.
≥When using double sided disc, you cannot record or play continuously from one side of the disc 
to the other. You will need to eject the disc and turn it over.
≥Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs 
from these containers prior to use.
≥It is recommended that you use Panasonic discs. Usually discs compatible with the DVD 
standard can be used for recording...

20LSQT1040
Before using
Discs
When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or 
DVD-Video format (Video format) and then format the disc. (l19, About format types)
1 When a brand-new DVD-RW is inserted in this unit, 
the screen on the right appears. Select [YES], then 
press the joystick.
2 Select format type, then press the joystick.
3 When the confirm screen appears, select [YES], then press the 
joystick.
≥To change the format type, format the disc again....