Panasonic Vdr D100 Operating Instructions Manual

11LSQT0969
Before using
Quick Guide
Quick Guide
∫Charging the battery
1 Connect the AC cable to the AC adaptor 
and the AC outlet.
2 Put the battery on the battery mount by 
aligning the mark, and then securely 
plug it in.
∫Fitting the battery
Push the battery against the battery holder 
and slide it until it clicks.
∫Removing the battery
While sliding the BATTERY RELEASE lever, 
slide the battery to remove it.
∫How to turn on/off the power
While pressing the button A, set the OFF/
ON switch to ON/OFF....

12LSQT0969
Before using
Quick Guide
∫Inserting/removing an SD card 
(VDR-D200 only)
1 Open the card slot cover.
2 Insert/remove the SD card into/from the 
card slot.
3 Securely close the card slot cover.
∫Recording motion pictures
≥Rotate the mode dial to select  .
1 Press the recording start/stop button to 
start recording.
2 Press the recording start/stop button 
again to pause recording.
∫Recording still pictures 
(VDR-D200 only)
≥Rotate the mode dial to select  .
Press the PHOTO SHOT button....

13LSQT0969
Before using
Quick Guide
∫Motion picture playback
≥Rotate the mode dial to select  .
1 Select the scene to be played back.
2 Press the joystick.
3 Move the joystick to operate.
∫Still picture playback 
(VDR-D200 only)
≥Rotate the mode dial to select  .
1 Select the file to be played back.
2 Press the joystick.
3 Move the joystick to operate.
1/;: Playback/Pause
:(Move): Skip playback (backward)
:(Move and hold): Review playback
9(Move): Skip playback (forward)
9(Move and hold): Cue playback
∫:...

14LSQT0969
Before using
Accessories
Accessories
Check the accessories before using this unit.
Battery pack
CGA-DU12Shoulder strap
VFC3506-1A
AC adaptor
PV-DAC14DUSB cable
K1HA05CD0014
DC cable
K2GJ2DC00011CD-ROM
(VDR-D200 only)
LSFT0643
≥(For VDR-D100 only)
You can download the DVD-
RAM Driver. Please refer to 
page 102 for details. AC cable
K2CA2CA00029 or 
K2CA2CA00025
AV/S cable
K2KZ9CB00001
CAUTION:
This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be required for 
voltages other...

15LSQT0969
Before using
Parts identification and handling
Parts identification and handling
1Lens
2 Microphone (built-in, stereo)
3 White balance sensor (l59)
4 Terminal cover
5 Audio-video output terminal [A/V] (l89, 92)
6 Video light (VDR-D200 only) (l54)
7 USB terminal [ ] (l93, 106)
8 Viewfinder (l18, 39)
9 LCD monitor open button [PUSH OPEN] (l18)
10 Video light button [LIGHT] (VDR-D200 only) 
(l54)
11 DC input terminal [DC/C.C. IN] (l26)
12 Recording start/stop button (l41)
13 Power switch [OFF/ON]...

16LSQT0969
Before using
Parts identification and handling
28 Reset button [RESET] (l138)
29 LCD monitor (l18)
30 Mode select switch [AUTO/MANUAL/FOCUS] 
(l55)
31 Speaker
32 Disc eject lever [DISC EJECT] (l27)
33 Disc/computer access lamp [ACCESS/PC] 
(l27, 107)
34 Disc compartment (l27)
35 Grip belt (lbelow)
36 Shoulder strap fixture (lbelow)
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad position.
1Flip the belt.
2Adjust the length.
3Fix the belt.
Put the strap through...

17LSQT0969
Before using
Parts identification and handling
Fit the lens cap to protect the surface of the lens.
The lens cap and lens cap cord comes preattached to the grip belt.
≥When not using the lens cap, pull the lens 
cap cord in the direction of the arrow. A
≥When you are not recording, be sure to 
cover the lens with the lens cap for 
protection. B
≥When you remove the lens cap, press the knobs firmly.
≥If the lens cap cord has come off
Pass the end of the lens cap cord through the attached eye...

18LSQT0969
Before using
Parts identification and handling
You can record the image while viewing it on the LCD monitor.
1 Press the PUSH OPEN button. The LCD 
monitor opens slightly.
Pull the LCD monitor out in the direction of 
the arrow.
≥The viewfinder is now deactivated.
≥It can open up to 90o.
2 Adjust the angle of the LCD monitor according to your preference.
≥It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.
≥The brightness and color level of the LCD monitor 
can be...

19LSQT0969
Before using
Discs and cards
Discs and cards
Discs that can be used on this unit
DIsc typeDVD-RAM
8 cm (3z)
Single sided/
double sidedDVD-RW
8 cm (3z)
Single sided/double sidedDVD-R
8 cm (3z)
Single sided/
double sided
(DVD-RAM 
Ver. 2.1)[DVD-RW Ver. 1.1/
2X-SPEED (2X/1X)](DVD-R for 
General Ver. 2.0)
Recording formatDVD Video 
Recording 
format
(VR format)DVD Video 
Recording 
format
(VR format)DVD-Video 
format
(Video format)DVD-Video 
format
(Video format)
CharacteristicRewritable disc...

20LSQT0969
Before using
Discs and cards
≥Still pictures cannot be recorded on a disc with this unit.
≥When using double sided disc, you cannot record or play continuously from one side of the disc 
to the other. You will need to eject the disc and turn it over.
≥Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs 
from these containers prior to use.
≥It is recommended that you use Panasonic discs. Usually discs compatible with the DVD 
standard can be used for...