Panasonic Vdr D100 Operating Instructions Manual

101LSQT0969
With a computer (VDR-D200 only)
Installation (Windows)
Installation (Windows)
When installing the software, log on to your computer as the Administrator or with a user name with 
equivalent authorization. (If you do not have authorization to do this, consult your manager.)
≥Before starting the installation, close any other software applications which are running.
≥Do not perform any other operations on your computer while the software is being installed.
≥Install DVD-RAM Driver and then...

102LSQT0969
Installation (Windows)
With a computer (VDR-D200 only)
5 Read carefully through the End User License 
Agreement (l100), then click [Yes].
≥You cannot install the application if you click [No].
6 Click [Next].
Continue to follow the on-screen messages to install it.
7When installation is complete, some notes will appear:
Check the contents, then click [k] at the top right of 
window.
8 Click [Finish].
Windows 2000 only:
The detection of device will start, after which it will take several...

103LSQT0969
With a computer (VDR-D200 only)
Installation (Windows)
1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
≥If the [Setup Menu] screen does not appear, double-click the CD-ROM drive 
icon in [My Computer].
2 Click [DVD-MovieAlbum].
≥The software application may not run properly if you cancel the installation at 
any point e.g. by pressing [Cancel].
≥Depending on the operating environment, you may be required to install 
DirectX 9.0b. If so, click [Yes], and install...

104LSQT0969
Installation (Windows)
With a computer (VDR-D200 only)
1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
≥If the [Setup Menu] screen does not appear, double-click the CD-ROM drive 
icon in [My Computer].
2 Click [DVDfunSTUDIO].
≥The software application may not run properly if you cancel the installation at 
any point e.g. by pressing [Cancel].
≥Depending on the operating environment, you may be required to install 
DirectX 9.0b. If so, click [Yes], and install it.
3...

105LSQT0969
With a computer (VDR-D200 only)
Installation (Windows)
For details on how to use the software applications, read the PDF instructions.
≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l97)
∫DVD-RAM Driver
Select [start] # [All Programs (Programs)] # [DVD-RAM] # [DVD-RAM 
Driver] # [Using DVD-RAM disc].
∫DVD-MovieAlbumSE
Select
 [start] # [All Programs (Programs)] # [Panasonic] # 
[DVD-MovieAlbumSE]
 # [Operation Manual].
∫DVDfunSTUDIO
Select [start] #...

106LSQT0969
Connection and recognition (Windows)
With a computer (VDR-D200 only)
Connection and recognition (Windows)
After the driver and software applications are installed, the unit must be connected to the computer 
and be correctly recognized by the computer.
≥Connect after installing the driver and software applications.
≥If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running, 
wait until it finishes, then remove the CD-ROM.)
≥If the recognition procedure is...

107LSQT0969
With a computer (VDR-D200 only)
Connection and recognition (Windows)
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (l108).
≥When the unit is connected to a computer in disc 
playback mode, no image will appear on the LCD 
monitor or viewfinder.
≥When this unit is connected to a computer, you 
cannot use this unit’s DISC EJECT lever to remove 
a disc. Use Windows Explorer to...

108LSQT0969
Connection and recognition (Windows)
With a computer (VDR-D200 only)
∫In card playback mode (When accessing the card)
[Removable Disk] is displayed in [My Computer].
Example folder structure of an SD card:
≥JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software that supports JPEG pictures.
≥Up to 999 files can be recorded in the [100CDPFP] or other such folder.
≥The DPOF setting files are recorded in the [MISC] folder.
≥Do...

109LSQT0969
With a computer (VDR-D200 only)
Connection and recognition (Windows)
To verify the unit is correctly recognized by the computer, select the unit’s mode, connect the unit to 
the computer via the USB cable and then follow the steps below.
≥With some computers including those made by NEC, the Device Manager may not be displayed 
if a mode that places restrictions on the functions has been established. Consult the 
manufacturer or follow the steps in your computer’s operating instructions to...

11 0LSQT0969
Creating a DVD-Video disc on a computer (Windows)
With a computer (VDR-D200 only)
Creating a DVD-Video disc on a computer 
(Windows)
Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/
DVD-R disc) from the images recorded on this unit.
≥Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
≥When using DVD-MovieAlbumSE or DVDfunSTUDIO, log on to your computer as Administrator 
with a login name equally authorized. If you log on with...