Panasonic Usb Speaker/handset Kx-ts710 Operating Instructions

LPlease read these Operating Instructions before using the unit and save 
for future reference.
LBe sure to use the USB cable included with the unit.
Contents/Sommaire/ContenidoPage/Page/Página
English instructions1 – 16
Instructions en français(1) – (12)
Instrucciones en español – 
Operating Instructions
USB Speaker/Handset
Model No. KX-TS710
TS710(e).book  Page 1  Friday, March 14, 2008  4:48 PM 

Table of Contents
2
Introduction
Feature highlights  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
System requirements for your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
For best performance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4...

Introduction
3
Thank you for purchasing the Panasonic USB Speaker/Handset.
Feature highlights
■Ideal for free internet calls and group conference
■Open top cover to use conventionally for private conversations
■Ideal for music enjoyment
■Easy to install on your computer
System requirements for your computer
The following system requirements must be met in order to use the unit.
ItemDescription
Operating SystemMicrosoft
® Windows® XP, Microsoft Windows Vista®, 
or Mac OS X v10.3.9 Panther
OthersUSB...

Introduction
4
Accessory information
Included parts
For best performance
Environment
LKeep the product away from electrical noise generating devices, such as 
fluorescent lamps and motors.
LThe product should be kept free from excessive smoke, dust, high temperature, 
and vibration.
LThe product should not be exposed to direct sunlight.
LDo not place heavy objects on top of the product.
LWhen you leave the product unused for a long period of time, disconnect the 
product from the computer.
LThe product...

Preparation
5
Installation (Connecting to a computer)
Important:
LStart the application software you want to use with the unit after installation.
Connect the included USB cable to the unit and your computer.
LThe status indicator lights up red when the computer is turned on. If the top cover 
is opened, the status indicator lights up blue (page 6).
LTo assure continued emission limit compliance, use only the shielded USB cable 
included.
To disconnect the unit
Unplug the USB cable from the computer....

Using the Unit
6
Status indicator
Operation
Using the receiver for calls
Open the top cover and talk.
LTo switch to the speakerphone, close the top cover and press {T} until the status 
indicator lights up blue.
Using the speakerphone for calls
Close the top cover and talk. When the status indicator lights up red, press {T} to 
turn the microphone-mute off (page 7). Then status indicator turns blue.
LSpeak alternately with the other party.
LTo switch to the receiver, open the top cover.
Note:
LUse the...

Using the Unit
7
Using the unit as the external speaker of the computer
You can listen to sounds from the computer through the speaker on the unit when the 
top cover is closed. 
LPress {T} until the status indicator lights up red to activate the microphone-mute 
for clearer sound.
Adjusting the receiver/speaker volume 
6 levels are available. 
Press {} repeatedly.
Microphone-mute
While microphone-mute is turned on, you can hear the other party, but the other party 
cannot hear you. Also, it keeps the...

Useful Information
8
Troubleshooting
ProblemCause/solution
The speaker/receiver does 
not sound.LThe application software you want to use with 
the unit was started before installing the unit. 
Please restart the application software.
LThe USB cable is not connected properly to the 
unit and your computer. Connect it.
LMake sure that your computer audio device’s 
playback volume is set to the maximum and that 
mute mode is not selected. 
LThe unit may not be selected as the audio 
device of your...

Useful Information
9
Other party cannot hear 
you.LThe application software you want to use with 
the unit was started before installing the unit. 
Please restart the application software.
LThe USB cable is not connected properly to the 
unit and your computer. Connect it.
LMake sure that your computer audio device’s 
recording volume is set to the maximum.
LIf the status indicator is red, press {T} to turn 
the microphone-mute off.
LThe unit may not be selected as the audio 
device of your computer....

Useful Information
10
Important security notice
LPanasonic cannot accept any liability or provide warranty for security problems 
occurring in the following cases:
– when the internet security settings were not set during use,
– when VoIP (Voice over Internet Protocol) communication software was used.
FCC and other information (for U.S. users only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference,...