Panasonic Tx L32c30 Operating Instructions

							  Tuning and Editing Channels
31
 
[Channel List Edit] - Skip unwanted channels / Edit channels (Change name, move)
You can hide unwanted channels. The hidden channels cannot be displayed except in this function.
Use this function to skip unwanted channels.
Select a channel and reveal / hide
99 *****1 BBC1
2 ITV 2
3 S4C
4 
*****5 *****6 *****
Channel List Editor
 [reveal] / [hide]
 : [reveal]
 : [hide] (skip)
 select  ●To reveal all channels Y
  ●To retune each channel (Manual Tuning)R (see below)
  ■To edit channels
You can also edit each channel in the Channel List.
 or CHSelect the channel to edit, then:
  ●To move the channel position
GSelect the new position StoreG
  ●To rename the channelB
ABCDEFGHIJKLMNUVWXYZ0123456abcdefghijklmnuvwxyz()+-.*_
OPQRST789!:#opqrst
Edit channel nameName
(maximum: five characters)
 select
 setSet characters
RETURN
Store
  ●You can also set the 
characters by using the 
numeric buttons (p. 23).
Note
  ●If a VCR is connected only with the RF cable, edit [VCR].
 
[Auto Tuning] - Set all TV channels automatically
1  Start Auto Tuning2  Settings are made automatically
Auto Tuning
All tuning data will be erased
Start Auto TuningEXIT
RETURN
Auto Tuning
1
EXITCH2
Scan 1 120Automatically retune all TV 
channels received in the area.
  ●All the previous tuning settings are erased.  ●When the operation is completed, the channel at channel position [1] will be displayed.  ●Search begins in the order from the lower channels to the higher channels.  ●If tuning has not been done completely  [Manual Tuning] (see below)
 
[Manual Tuning] - Set TV channel manually
Set TV channel manually after Auto Tuning.
0Fine Tuning
Manual TuningSound System
Colour SystemCH57
Auto 5.5MHz
Manual Tuning
1120
Fine Tuning  ●Use to make small adjustments to the tuning of an individual 
channel (affected by weather conditions, etc.)
Manual Tuning
Set channel manually after Auto Tuning.
  ●Set Sound System and Colour System, and then perform this 
function. Set Colour System [Auto] normally.
  ●If a VCR is connected only with the RF cable, select channel 
position [0].
1  Select a channel position2  Select a channel3  Search and storeabcdefjklghimnotuvpqrswxyzCH store
 search
TH_L32C30KMTX_EN.indd   31TH_L32C30KMTX_EN.indd   313/18/2011   4:26:02 PM3/18/2011   4:26:02 PM
 
						

							  Child Lock
32
 
Child Lock
EXIT
MENU
TV
abcdef
jk   lghimno
tuvpqrswxyz
B GY
You can lock specific channels / AV input terminals to control who could watch them.When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it.
[Child Lock] - Control channel audience
1  Enter the PIN number (4 digits)2  Select [Child Lock List]
*  *  *  *
 
Child Lock-PIN Entry 
Please enter new PIN 
PIN
  ●Enter the PIN number twice at 
first setting.
abcdefjklghimnotuvpqrswxyz
  Child Lock 
Change PIN 
Child Lock List 
Access  access
 select
3  Select the channel / input to be locked
1
2Lock
3Lock
4Lock
5Lock
6Lock
7Lock
8
Lock
  Lock 
Name InputTV TV
TV TV TV TV
TV TV
TV TV TV TV
TV TV
TV TVType  Child Lock List - TV and AV
  lock
 select  ●To cancel  Select the locked channel / input 
  ●To lock all G
  ●To cancel all locks Y
  ●To jump to the top of the next input B
  ■To change the PIN number
Select [Change PIN] in [Child Lock] and enter a new PIN number twice.
Note
  ●Make a note of the PIN number in case you forget it.  ●Performing [Shipping Condition] (p. 34) erases the PIN number and all settings.
  ■To return to TVEXIT
Preparations:1  Display the menu2  Select [Setup]MENU
  access
 select
1Select [Child Lock]Setup Menu1/2
Off Timer
Eco Navigation
Child LockTuning Menu
OSD Language
Display Settings
VIERA Link Settings
Network Setup
DivX® VODOff
Access  access
 select
 
In
  ■EXI
Fotha  ●T
  ■
Yo
1 S
  :  Appears when the channel / input is locked
TH_L32C30KMTX_EN.indd   32TH_L32C30KMTX_EN.indd   323/18/2011   4:26:03 PM3/18/2011   4:26:03 PM
 
						

							  Input Labels
33
it.
s
 
Input Labels
  ■To return to TVEXIT
EXIT
RETURN
MENU
TV
abcdef
jk   lghimno
tuvpqrswxyz
For easier identification and selection of the input mode, you can label each input mode or skip terminal 
that is not connected to any equipment.
  ●To select the input mode  (p. 20)
  ■User input
You can name each input mode freely.
1 Select [User input]2  Set characters one by one3 Store
 access
 selectABCDEFGHIJKLMNUVWXYZ0123456abcdefghijklmnuvwxyz()+-.*_
OPQRST789!:#opqrst
User inputName
(maximum: ten characters)
 select
 set
RETURN
  ●You can also set the characters by using the numeric 
buttons.
 ( 
p. 23) Preparations:
1  Display the menu2  Select [Setup]MENU
  access
 select
1Select [Display Settings]
Off TimerSetup Menu
Child Lock
Tuning MenuOff1/2
Access OSD Language
Display SettingsVIERA Link Settings
Network Setup
DivX® VOD Eco Navigation
  access
 select
2Select [Input Labels]
Teletext LIst Display Settings
Input LabelsAccess
Banner Display Timeout
Playing Time Display3 seconds
On Teletext Character Set English  access
 select
3Select an input terminal and setDisplay SettingsInput LabelsAV 1
AV 2
AV 3
PC
HDMI1
HDMI2
HDMI3DVD
AV 2
AV 3
PC
HDMI1
HDMI2
HDMI3 set select
The labels you set will be displayed in [Input Selection] menu (p. 20) or 
banner.
  ●If [Skip] is selected, you cannot select the mode.
TH_L32C30KMTX_EN.indd   33TH_L32C30KMTX_EN.indd   333/18/2011   4:26:04 PM3/18/2011   4:26:04 PM
 
						

							  Shipping Condition (Reset settings)
34
 
Shipping Condition (Reset settings)
Resets the TV to its original condition, i.e. no channels tuned in.
All settings are reset (channels, picture, sound settings, etc.).
EXIT
MENU
TV
  ■To return to TVEXIT
 
[Shipping Condition] - Restore settings
1  Check the message and reset2  Follow the on-screen instructions
Shipping Condition
All tuning data will be erased
Are you sure?
Are you sure?
ConfirmEXIT
RETURN
 (confirm)
 (confirm)
  (start
[Shipping Condition])Reset to Factory Shipping Condition
Completed.
Please switch off TV.
  ●[Auto Tuning] will automatically start when 
Mains power On/Off switch is next turned on 
(p. 12).
  ■To retune TV channels only, e.g. after moving house
  [Auto Tuning] in “Tuning and Editing Channels” (p. 31)Preparations:
1  Display the menu2  Select [Setup]MENU
 access
 select
1Select [System Menu]
System MenuSetup Menu
Access2/2
Other Settings
 access
 select
2Select [Shipping Condition]
Shipping ConditionSystem Menu
System InformationAccess
Software Licence
 access
 select
 U
MeMeVIECa
PhVidMu
Wh  ●[Dre  ●T  ●D
M
  ●P  ●T
 
To
  ●F
■
■
ToS
Gthlafa
TH_L32C30KMTX_EN.indd   34TH_L32C30KMTX_EN.indd   343/18/2011   4:26:04 PM3/18/2011   4:26:04 PM
 
						

							 
Using Media Player
35
on 
 
Using Media Player
Media Player allows you to enjoy photo, video or music recorded on an SD\
 Card or a USB Flash 
Memory.
VIERA IMAGE VIEWER is a function that enables easy-viewing of photos or video\
s recorded on an SD 
Card on the TV screen by simply inserting the SD Card into the SD Card slot.
Photo mode : Still pictures recorded by digital cameras will be displayed.
Video mode : Moving pictures recorded by digital video cameras will be played back.
Music mode : Digital music data will be played back.
When these functions are used, the audio signal is output from audio out\
put terminals.
 
●[Date] shows the date on which the recording was made by the recording e\
quipment. The file without 
record of the date is shown as [
****/**/**].
 
●The picture may not appear correctly on this TV depending on the recording equipment used. 
●Display may take some time when there are many files and folders in the \
SD card or USB Flash 
Memory.
 
●Partly degraded files might be displayed at a reduced resolution. 
●The folder and file names may be different depending on the digital camera or digital video camera used.
 To insert or remove the SD Card / USB Flash Memory
 
●For more information on the SD Card, USB Flash Memory and supported file\
 formats  (p. 64 - 66)
 
■USB Flash Memory
 
●Insert or remove straightly and completely.
 
■SD Card
To insert the 
SD Card
Gently insert 
the SD Card 
label surface 
facing front.
Label 
surface
Cutout
Push until a 
click is heard
To remove the 
SD Card
Push the  centre of  the card
TH-L32C30KMTX_EN.indd   35 TH-L32C30KMTX_EN.indd   35 6/16/2011   2:52:52 PM
6/16/2011   2:52:52 PM
 
						

							 
Using Media Player
36
 Change the device
You can change to the other device input directly in the same mode if two\
 or more devices are 
connected.
1  Display the menu2  Select the icon you want to accessYMedia Player
Drive Select
SD CardEXIT
Select
RETURN
Access
selected device name
 access
 select
 
■To return to TV
EXIT or 
 
■To return to the 
previous screen
RETURN
SD CARD
EXIT
RETURN
TV
Y
INFO
OPTION
MENUASPECT
RG B
Starting Media Player
1Insert the SD Card or USB Flash Memory
 (p. 35)
When the SD Card is inserted, the input mode automatically switches to 
Media Player.
2Switch to Media Player
3Select the icon you want to access
Media Player
Drive Select
SD CardEXIT
Select
RETURN
Access
selected device name
 access
 select
 
●If only one device is connected, this 
step will be skipped.
4Select the content
 Media Player
 Photo  Video  Music
 Contents Select SD Card  EXIT
 Select
 RETURN
 Access
 access
 select
[Photo]  “Photo mode” (p. 37)
[Video]   “Video mode” (p. 40)
[Music]   “Music mode” (p. 43)
 
●You can also access each mode directly by using VIERA TOOLS.  “How to Use VIERA TOOLS” (p. 21)
 P
Su
Th
ExMe
 
●T 
●T
 
IN
 
■
 1  D
 
2  S
 
 3  S
●
TH-L32C30KMTX_EN.indd   36 TH-L32C30KMTX_EN.indd   36 6/16/2011   2:52:47 PM
6/16/2011   2:52:47 PM
 
						

							  Using Media Player
37
to 
 
Photo mode
Supported file format  (p. 65)
The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed.
Example : Thumbnail - [All photos]
OPTIONSD Card
EXIT
SelectRETURN
Media Player  PhotoAll photos
Slideshow View Select Drive Select Contents SelectInfo View
Option Menuselected device name
  ● 
To change the number of photos on a thumbnail
screen at a time ( 7 × 4 ↔ 10 × 6 )
OPTIONOption Menu 
Slideshow SettingsChange size
  select
[Change size]
 Set
: Error display
  ●To change the background music  “Photo Setup” (p. 38)  ●To display the information of the highlighted photo
 INFO
 
  1/48
  p1010001.JPG   File name
  Date
  Pixel2010/10/23
  1600X1200File number / Total file number
  ■ 
To sort by folder, recorded date or recorded month
 
1  Display the viewing mode selection screen
 G
2  Select the sort type
 
Folder view
Sort by Date
Sort by Month
 access
 select
[Folder view] : 
Displays the thumbnails grouped by folders
  ●The files which are not in a folder will be collected into the folder named “/”.
[Sort by Date] :  
Displays the thumbnails grouped by the same date
  ●The group of the photos without recorded date is shown as [Unknown].
[Sort by Month] : 
Displays the thumbnails grouped by the same month
  ●The group of the photos without recorded date is shown as [Unknown].
 
3  Select one of the sorted groups to display the thumbnails of the selected group
OPTION
2010/10/23
2010/11/242010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Media Player  PhotoSort by Date
SD CardEXIT
Select RETURN
Slideshow View Select Contents SelectInfo Access
Option Menu
Drive Select
 
 select
  display thumbnails of the selected group
  ● 
To return to the thumbnail of all photos
 
G
 access
  select
[All photos]
  ● 
To display the information of the highlighted group
 INFO
 
  1/12
2010/10/23   Folder name
  Number of files
  3
 
Folder name, date or month   Group number /
Total group number
TH_L32C30KMTX_EN.indd   37TH_L32C30KMTX_EN.indd   373/18/2011   4:26:08 PM3/18/2011   4:26:08 PM
 
						

							  Using Media Player
38
 
 
[Single view] - Photos are displayed one at a time.
  Select the file from the thumbnail of photos to be viewed
 
 select
 access
  Example : 
 
Single view  Single view
  Stop  EXIT
  Select
  RETURN
  Rotate
 
Operation guide
  ● 
To display / hide the 
operation guide
 
INFO
  ● 
To return to thumbnail
 RETURN
  ● 
To operate Single view
 
  To the previous photo
  Slideshow
  To the next photo
  Stop
  (return to thumbnail)
  ● 
To rotate 90°
 B
   
[Slideshow] -  Slideshow will complete when all photos have been viewed within the present thumbnail.
 1  Select the file from the thumbnail of photos
for the first view 2 Start Slideshow
 
R
 
 
select
  ● 
To display / hide the operation guide  ● 
To pause (return to Single view)  ● 
To return to thumbnail
 INFO
  
RETURN
   
Photo Setup
 
Setup the settings for Photo mode.
 
1  Display the option menu 
2  Select [Slideshow Settings] 
3  Select the items and set
 OPTION
  
  Option Menu 
Slideshow Settings
 
 
Slideshow Settings 
Frame
  Colour Effect
  Transition Effect
  Screen Mode
  Interval
  Repeat
  Back Ground Music
 
5 seconds
  On   Off
  Fade
  Normal   Off 
Burst Playback 
Off
  
access
 
 set
or select
  access
[Back Ground Music]
  Note  ● 
Picture quality may become lower depending on the slideshow settings.  ● 
Picture setting may not work depending on the slideshow settings.
 F
 C
E
T
E
 S
M
B
P
 
In
 R
 B
G
M
TH_L32C30KMTX_EN.indd   38TH_L32C30KMTX_EN.indd   383/18/2011   4:26:09 PM3/18/2011   4:26:09 PM
 
						

							  Using Media Player
39
ail.
 
Item  Adjustments / Configurations (alternatives)
 
FrameSelects the indication frame of the slideshow
[Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] /
[Gallery] / [Cinema]
[Multi]: 9 division display like tiled design.
[Collage]: A photo is displayed at random position and scale.
[Drift (+ calendar) / Drift]: Photos are displayed like flow images.• You can select to display the calendar or not. To change the month of the calendar, 
press the left or right cursor button while viewing the slideshow.
[Gallery (+ calendar) / Gallery]: Various sizes of photos in the frame are displayed.
• You can select to display the calendar or not. To change the month of the calendar, 
press the left or right cursor button while viewing the slideshow.
[Cinema]: Photos are displayed like old films (sepia tone).
  Colour 
EffectSelects the colour effect of photos on Single view and Slideshow
[Off] / [Sepia] / [Gray scale]
  ●This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema].
Transition 
EffectSelects the transition effect for photo switching during slideshow
[Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random]
[Fade]: The next photo fades in gradually.
[Slide]: The next photo slides and appears from the left side.
[Dissolve]: The photo is replaced by an indefinite block unit.
[Motion]:  The photo is replaced with enlarged, reduced, moved up or moved down.
[Random]: Each transition mode is performed randomly.
• This function is available when [Frame] is set to [Off].
  Screen 
ModeSelects enlarged or normal viewing mode on Single view and Slideshow
[Normal] / [Zoom]
  ●This function is not available when [Frame] is set to [Collage], [Drift], [Gallery] or 
[Cinema].
  ●This function is not available when [Transition Effect] is set to [Motion].  ●Depending on the photo size, the photo may not be enlarged.
Burst 
PlaybackSelects whether the continuous shots are displayed in rapid interval during the slideshow
[Off] / [On]
  ●This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema].  ●This function is not available when [Transition Effect] is set to [Motion].
  Interval  Selects slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds)
  ● 
This function is not available when [Transition Effect] is set to [Motion].
  Repeat 
Slideshow repeat [Off] / [On]
  Back 
Ground 
Music  Selects the background music during Photo mode 
  [Off] / [Type1] / [Type2] / [Type3] / [User] / [Auto]
  ● 
[Type1], [Type2] and [Type3] are the fixed music each installed in this TV.
  [User]:  
Music data in the current device registered by yourself will be played back.
  To register the music
 1  
Select the music file 2  Select [File] or [Folder] 
  Depending on the conditions of the 
current device, select folders until 
you reach the desired music file.
   Register Slideshow BGM? 
File 
Folder
 
 DCIM
 MISC
 001photo
 002photo
 003music
 01  song.mp3 PRIVATE  Back Ground Music
 
Type1
 set
 select
 
[File]:  The selected music file will be registered as 
background music.
  [Folder]:  All the music in the folder which contains 
the selected music file will be registered as 
background music.
 
 select
 access  ●If no music has been registered or the registered music device is removed, no sound 
will be produced.
  [Auto]:  
Music data stored in the root folder of the current device will be played back 
randomly.
  ● 
If there is no available music data, no sound will be produced.
TH_L32C30KMTX_EN.indd   39TH_L32C30KMTX_EN.indd   393/18/2011   4:26:10 PM3/18/2011   4:26:10 PM
 
						

							 
Using Media Player
40
  Change the contents
 You can switch to the other mode of Media Player from the thumbnail view.
 1  While the thumbnail is displayed, display the 
contents selection
     
B
 2  Select the contents
 
OPTION SD Card EXIT
 Select  RETURN
 Media Player  Photo  All photos
 Slideshow  View Select  
 Contents Select
 Info
 View Photo
 Video  Music
 Contents Select SD Card  EXIT
 Select
 RETURN
 Access
   access
 
 select
 
[Photo]  “Photo mode” (p. 37)
[Video]   “Video mode” (below)
[Music]   “Music mode” (p. 43)
  Video mode
Supported file format  (p. 65)
 The thumbnail of video titles in the SD Card or USB Flash Memory will be\
 displayed.
 Example : Thumbnail - [Title view]
OPTION
 Title view
 Media Player  Video
 Trip1
 Nature2
 2010_9  Trip2
 Nature3
 Trip3
 Nature4 Trip4
 Nature5  Trip5
 Nature6 Room
 2010_4  Nature1
 2010_7
 SD Card
 EXIT
 Select  RETURN
 Play  Contents Select  Info
 Access
   Option Menu
Drive Select
 The preview will start when the title is highlighted if it supports 
a preview.
 
● To turn off the preview     “Video Setup” (p. 41) 
● To display the information of the highlighted title
 
INFO
 
 1/15
 Trip1
 8
 Title
 Number of scenes  Date & Time
 Duration
 2010/02/19 11:21
 00h15m39s
 Title number /
Total title number  File format
 
  :  Error display
  
:  The file does not support thumbnail view.
 
● To view the scenes of the title
 Select the title
 Example : Thumbnail - [Scene view]
OPTION
 Trip1_1
 Trip1_8  Trip1_2  Trip1_3  Trip1_4  Trip1_5  Trip1_6  Trip1_7
 Media Player  Video
 Title view  >  Trip1
 SD Card EXIT
 Select  RETURN  Contents Select
 Info
 Play Play Option Menu
Drive Select
 The preview will start when the scene is highlighted if it 
supports a preview.
 
● To turn off the preview
  “Video Setup” (p. 41) 
● To display the information of the highlighted scene
 
INFO
 
 1/8
 Trip1_1
 00h04m12s
 Scene
 Duration  Date & Time
 2010/02/19 11:21 Scene number /
Total scene 
number  File format
 
 select
 access
 
■ Playback from Title view
 Playback of the selected title will start.
 
● To repeat playback  “Video Setup” (p. 41)
 1  Select the title 2  Start playback
 
select R
 
■
 Pla 
● T
 1  S
 
 
●T
 
■
 ExSD
 Op
 
■
  V
 Se
 1  D
i
 
OPT
 
 V
 R
TH-L32C30KMTX_EN.indd   40 TH-L32C30KMTX_EN.indd   40 6/16/2011   2:52:49 PM
6/16/2011   2:52:49 PM