Panasonic Tv Monitor Receiver Ct 1388 Operating Instructions

O Op
pe
er
ra
at
ti
in
ng
g 
 I
In
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
C
CT
T-
-1
13
38
88
8Y
YD
D
C CT
T-
-1
13
38
89
9V
VY
YD
D
C CT
T-
-2
20
08
88
8Y
YD
DC CT
T-
-2
20
08
89
9V
VY
YD
D
C CT
T-
-2
27
78
88
8Y
YD
D
C CT
T-
-2
27
78
89
9V
VY
YD
D
0386.QXD  7/27/01 16:28  Page 1 

-2-Important:
Changes or modification not expressly
approved by Matsushita Television
Company, Inc. could void the user’s
authority to operate the equipment. Notice from the FCC:
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
FEATURECHART
IMPORTANTINFORMATION
MODELS
CT-1388YD...

-3-
Your new TV Monitor/Receiver features a solid state
chassis that is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product may be
found on the back of the unit. You should note the
model and serial number in the space provided and
retain as a permanent record of your purchase. This
will aid in identification in the event of theft or loss.
Product registration is available for...

-4-
Cable / Antenna (Cont.)
Antenna Connection
• For proper reception of VHF/UHF channels, an
external antenna is required. For best reception
an outdoor antenna is recommended.
• Antenna Mode must be set to TV.
Video/Audio In & Out Connection
Incoming Cable from Home Antenna
CT-1388YD, CT-1389VYD, CT-2088YD and CT-2089VYD
The IN and OUT terminals located on the back of Monitor directly pass the input signals through
the out terminals, so you may monitor or record the external Video/Audio information....

-5-
S-Video In & Out Connection
CT-1388YD, CT-1389VYD, CT-2088YD and CT-2089VYD
The S-Video IN and OUT terminals located on the back of Monitor directly pass the input signals
through the out terminals, so you may monitor or record the external video/audio information.
Notes:
• Only Video 3 audio in and out may be used with S-Video operation.
• Connection of optional S-Video jack will override the standard Video Input 3 BNC connector.
• S-Video IN and OUT terminals will operate whether the Monitor is ON...

-6-
Video/Audio In & Out Connection
CT-2788YD and CT-2789VYD
The IN and OUT terminals located on the back of Monitor directly pass the input signals through the out
terminals, so you may monitor or record the external video/audio information.
Operation
1. Connect an external video/audio source to the Monitor video/audio input terminals as shown.
2. Select video mode by pressing the TV/VIDEO button.
3. Connect an external video/audio source (Monitor or VCR) to the video/audio
output terminals as shown.
4....

-7-
This Monitor has an Auto Power On feature which automatically turns the unit ON when AC power is
supplied. This feature initiates the Monitor to turn On automatically when using it with other equipment to a
main power switch. (Such as: AC power strip or when plugged directly into the back of another video
equipment.) Once the initial power has been supplied and the Monitor turns ON, the POWER switch
located on the front of the Monitor may be used to turn the Monitor OFF and ON as desired.
Procedure...

Panasonic®
BROADCAST AND TELEVISION SYSTEMS
PANASONIC BROADCAST AND TELEVISION SYSTEMS COMPANY
Division of Matsushita Electric Corporation of America
3330 Cahuenga Boulevard West, Los Angeles, CA 90068
WARNING:To reduce the risk of electric shock do not
remove cover or back. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
The exclamation point
within a triangle is intended
to tell the user that
important operating and
servicing instructions are in
the papers with the...

-9-
CH / VOL Buttons
Press theCH(channel) orVOL(volume)
buttons to select an icon. Use the CH buttons
to highlight the desired features. Use VOL
buttons to select and adjust features.
Remote Control
The Remote Control Quick Reference Guide
is located in the package provided with the
TV.
Remote Navigation Buttons
VOL VOLCH
CH
ACTION Button
Press theACTIONbutton to display the Main
Menu and Sub Menus. Press theACTION
button repeatedly to exit.
Note:Models CT-1388YD and CT-2088YD do
not display AUDIO,...

-10-
OTHER ADJ.

AI SOUND - Automatically maintain constant
volume between programs and commercials.
(AI sound is not available in VIDEO mode.)
Note:AI Sound feature is not available in
CT-2788YD)
SURROUND
MODE - Enhances audio response when listing
to stereo.
SPEAKERS

ON - TV SPEAKERS operate normally.

OFF&VARIABLE AUDIO OUT - TV Speakers
OFF, sound is adjustable from TV.

OFF&FIXED AUDIO OUT- TV Speakers OFF,
sound is adjustable from External Amplifier.
Note:OFF & VARIABLE and OFF & FIXED AUDIO
OUT...