Panasonic Tv Dvd Vcr Combination Pv Dm2794 Operating Instructions

31
VCR 
Operation
2 Press CH ▲▼ or NUMBER keys to 
Select Channel.
•  For “LINE” input, see page 22.
3  Press SPEED to select recording 
speed (see page 8).
4  Press REC to start recording.
•  You cannot view another channel during 
recording.
•  It is not possible to record from DVD/CD to VHS 
tape using this unit.
•  After the unit has been in Rec Pause mode for 5 
minutes, it will stop automatically to protect the 
tape and the video head.
•  The remaining recording time of an OTR can be 
displayed by...

32For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
1  Press SEARCH in Playback or Stop 
mode to display INDEX SEARCH 
screen, and then press NUMBER 
keys to select the recording number.
Go directly to the desired recording.
•  If Index Search is started very close to an 
index mark, that index mark may not be 
counted in the search.
3  Play begins at search end. To search 
forward or back 1 index, press FF or 
REW while screen...

33
VCR 
Operation
Set to see a recording over and over.

34For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
5  Press PROG to end the program. To 
Enter More Programs, press ▲▼ to 
select and SET to set a blank 
program number, and then repeat 
step 4.
6  Press PROG twice to exit this mode. 1  Press PROG to display SET 
PROGRAM screen.
2 Press ▲▼ to select “TIMER 
PROGRAMMING.”
3  Press SET to display screen.
•  If a program is already in memory, press ▲▼, 
and SET to select an unused...

35
VCR 
Operation
Hold down STOP for a few seconds to 
cancel the Timer Recording.
•  Any future daily or weekly recordings will be 
per formed as programmed.
  Cancel a Timer Re cord ing:
(Recording is in progress)
5  Press PROG twice to exit this mode.

36For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Special VCR Features
Insert a tape in Power off mode.
Power turns on, → Play.
•  Playback begins if tape has no record tab.
Tape reaches its end
Rewind, → Stop.
Tape with no record tab reaches its end
Rewind, → Stop, → Eject. (except for Recording)
(Repeat Play must be “OFF”)
  Auto Playback
 
Auto Rewind
 
Playback Auto Eject
Note
SET SELECT
▲▼ ◄ ►
ACT IONTRACKING
REC 

37
VCR 
Operation
All operations are prohibited except Timer 
recording and tape eject. Useful for families 
with small children.
Repeat above with or without cassette to 
turn “OFF.”
•  VCR Lock is canceled automatically after about 
24 hours if clock is set.
In Stop mode, hold down REC on the unit 
without a cassette inserted for 7 seconds 
to turn “ON.”
(Please ignore “NO CASSETTE” warning.)
VCRLOCKACTIVATED
VCRLOCK OFF
  VCR Lock
Continuously analyzes the signal and adjusts 
for optimum picture...

38For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
1
Insert pre- recorded 
tape.Insert blank tape with 
record tab.
•  Dubbing tapes protected 
with Copy Guard will 
have poor quality results.
2
3
4Press PLAY, then press PAUSE at 
starting point to put in Standby mode.
Press PLAY to start dubbing.
Playing Source unit start playback.
Press STOP to stop dubbing.Select “LINE” mode.
See page 22 “Selecting Input Mode”.
Press REC, then...

39
TV / VCR 
Operation
V-Chip Control Features
1  Press ACTION to display MAIN 
MENU.
A 4-digit code must be entered to view a 
blocked program or change rating settings.
•  Some rental movies do not include V- Chip data.
•  Do not forget your secret code.
•  Once ratings are set, restricted tapes or 
programs cannot be accessed unless the secret 
code is entered.
•  Step 5 not necessary when changing rating.
6  Press SET to display Ratings menu 
(see pages 40- 44). Or press ACTION 
twice to exit. 4...

40For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
1 Press ▲▼ to select “US MOVIES.”
•  “NEXT PAGE” displays CANADIAN V-Chip 
settings menu. Please refer to pages 42- 43 
for more details on Canadian tapes or 
broadcasts.
If LOCK menu is not displayed, perform 
“Enter Secret Code” steps on page 39.
ON:
V-Chip Control is activated.
OFF:
V-Chip Control is deactivated.
3 Press ▲▼ to 
select “CHANGE 
SETTINGS.”
4  Press SET to 
display...