Panasonic Tv Dvd Vcr Combination Pv Df204 Operating Instructions
Have a look at the manual Panasonic Tv Dvd Vcr Combination Pv Df204 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 Disc Operation Enjoy a surround-like effect if you are using two front speakers only. The effect is broadened and sound seems to come from virtual speakers on either side if the disc has surround signals recorded on it. Press VSS in Disc mode. • The Surround sound effects can be changed by pressing VSS repeatedly as shown in the figure below. • Turn off the surround effects on the other equipment. • V.S.S. will not work, or will have less effect, with some discs. • Turn V.S.S. off if it causes distortion. VSS OFF VSS1 VSS2 VSS3 Default V.S.S. (Virtual Surround Sound) • When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Notes • This function not available with DVD-R AM. • ANGLE Indicator lights up on the unit when a scene recorded from different angles is detected. • The angle number can be set beforehand so that the angle is switched whenever ANGLE Indicator lights up. DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed from different angles. You can view these angles, if available, using the ANGLE button. 1 Press ANGLE in Play mode to display the angle selection on-screen. 2 Press ANGLE repeatedly to select the desired angle. • Display disappears after 5 seconds. Number of angle being played back. ANGLE:1 SELECT :ANGLE ANGLE:2 SELECT :ANGLE Multiple Angle Viewing DVD-V Notes DVD-VCDDVD- R AM
62For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo 1 Press ACTION in Stop mode to display MAIN MENU. 2 Press ▲▼ ◄ ► to select “DVD.” 3 Press SET to display DVD MAIN MENU. To select and set the language of the audio soundtrack, subtitles, or title/DVD menus for all discs to be played.
63 Disc Operation • When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Language Code List Language Code Abkhazian6566 Afar6565 Afrikaans6570 Albanian8381 Ameharic6577 Arabic6582 Armenian7289 Assamese6583 Aymara6588 Azerbaijani6590 Bashkir6665 Basque6985 Bengali;Bangla6678 Bhutani6890 Bihari6672 Breton6682 Bulgarian6671 Burmese7789 Byelorussian6669 Cambodian7577 Catalan6765 Chinese9072 Corsican6779 Croatian7282 Czech6783 Danish6865 Dutch7876 English6978 Esperanto6979 Estonian6984 Faroese7079 Fiji7074 Finnish7073 French7082 Frisian7089 Galician7176 Georgian7565 German6869 Greek6976 Greenlandic7576 Guarani7178 Gujarati7185 Language Code Hausa7265 Hebrew7387 Hindi7273 Hungarian7285 Icelandic7383 Indonesian7378 Interlingua7365 Irish7165 Italian7384 Japanese74 6 5 Javanese74 8 7 Kannada7578 Kashmiri7583 Kazakh7575 Kirghiz7589 Korean7579 Kurdish7585 Laothian7679 Latin7665 Latvian, Lettish7686 Lingala7678 Lithuanian7684 Macedonian7775 Malagasy7771 Malay7783 Malayalam7776 Maltese7784 Maori7773 Marathi7782 Moldavian7779 Mongolian7778 Nauru7865 Nepali7869 Norwegian7879 Oriya7982 Panjabi8065 Pashto, Pushto8083 Persian7065 Polish8076 Portuguese8084 Quechua8185 Rhaeto-Romance8277 Language Code Romanian8279 Russian8285 Samoan8377 Sanskrit8365 Scots Gaelic7168 Serbian8382 Serbo-Croatian8372 Shona8378 Sindhi8368 Singhalese8373 Slovak8375 Slovenian8376 Somali8379 Spanish6983 Sundanese8385 Swahili8387 Swedish8386 Ta g a l o g8476 Ta j i k8471 Tamil8465 Ta t a r8484 Te l u g u8469 Thai8472 Tibetan6679 Tigrinya8473 To n g a8479 Tu r k i s h8482 Tu r k m e n8475 Tw i8487 Ukrainian8575 Urdu8582 Uzbek8590 Vietnamese8673 Volapük8679 Welsh6789 Wolof8779 Xhosa8872 Yiddish747 3 Yo r u b a8979 Zulu9085
64For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo Select the digital output to be output from the optical digital audio output connector of the unit.
65 Disc Operation • When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. 8 Press ACTION to redisplay DVD MAIN MENU and go to step 4 to set up another item. Or, press ACTION three times to exit.
66For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo 4 Press ▲▼ to select “TV MODE.” 5 Press SET repeatedly for mode.
67 Information These displays will alert you to a missed operation or provide further instructions. Warning and Instruction Displays OSD CAUTION Page PLEASE SET CLOCK BY PRESSING ACTION KEYIf you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set...20 CHECK CASSETTE RECORD TABIf you press REC, and a cassette is inserted with no record tab...8, 30 TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SECIf you press STOP during a Timer Recording...35 NO CASSETTEIf you press PLAY, FF, REW, or REC without a cassette inser ted...30-31 PLEASE PREPARE FOR TIMER RECIf the unit is not in Stop mode, or cassette is not inserted, or cassette has no record tab, or tape is at its end two minutes before a Timer Recording is about to begin... 34-35 VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END: PLAY If head cleaning becomes necessary while playing back a tape...8 VCR LOCK ACTIVATEDIf you press a function button other than STOP/EJECT or POWER while the unit is in VCR Lock mode...37 PLEASE CHECK THE DISC, AND FOR STAINS OR SCR ATCHES ON DISCIf you press PLAY, or the unit reads data from a stained or scratched disc in DVD mode. Also, if the type of disc is other than DVD or CD... 10 THIS DISC MAY NOT BE PLAYED IN YOUR REGIONPlayback of a disc with different region number was attempted. Only discs marked region “1,” “ALL,” or those that include “1” are playable on this unit. 10 THIS TYPE OF DISC CANNOT BE PLAYED. PLEASE INSERT A DIFFERENT DISCAn unusable disc is inserted in the unit, or the disc is not inserted with label side up.9
68For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo Check the following points once again if you are having trouble with your unit. Before Requesting Service PROBLEM CORRECTION Page PowerNo power…Completely insert Power Plug into an AC outlet.13 Set POWER button to ON.11-12 Power turns itself off...Auto power-off (shut off) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in T V or Playback mode. Turn the power back on.45-46 Monitor No picture or sound...Make sure your antenna system (T V or CABLE) is correctly set. 14 Completely insert Power Plug into an AC outlet.13 Set POWER button to ON.11-12 Poor picture with normal sound...Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP Video Adjustment.28-29 Poor sound with normal picture...Adjust VOLUME control.22 Poor T V reception...Adjust SHARPNESS and PICTURE controls in the SET UP Video Adjustment.28-29 No color or poor color...Adjust TINT and COLOR controls in the SET UP Video Adjustment.28-29 Ghost (multiple) images...Install a directional antenna.14 T V programs cannot be watched...Make sure the selected channel is in unit’s memory.19 Channel cannot be selected...Only the channel being recorded can be viewed on this unit.31 VCR T V program cannot be recorded...Make sure your antenna system (T V or CABLE), is correctly set. 14 Make sure cassette record tab is intact.8 Timer recording cannot be performed…Check that clock is set to current time and date. 45 Make sure DSS/CABLE box (if used) is left on and tuned to channel to be recorded.14 Set recording Start /Stop times correctly.34-35 Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer Recording, even after power is restored. No playback picture, or the playback picture is noisy or contains streaks...Adjust TR ACKING control in either direction. 37 Try Head Cleaning.8 VCR cannot be controlled...Make sure VCR LOCK is set to off. 37 Remote Control Unit cannot be controlled...Aim Remote directly at the remote sensor on the unit. Avoid any object blocking signal path. 12 Inspect the remote batteries.8 Make sure VCR LOCK is set to off.37 Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference.12 ACTION, PLAY, SELECT, SET POWER, etc. buttons cannot be selected...Press T V/ VCR for T V-VCR mode.12 Press DVD for DVD mode.12 Check remote batteries.8
69 Information PROBLEM CORRECTION Page DVD /CD Play fails to start even when PLAY is pressed...This unit cannot play discs other than DVDs and CDs.9 The disc may be dirty and require cleaning.10 Picture is distorted during rapid advance or rapid reverse...The picture will be somewhat distorted at times: this is normal. No For ward/Reverse search play...Some discs may have sections which prohibit For ward/Reverse search. 47 Audio soundtrack and/or subtitle language is not the one selected at the initial settings...The audio soundtrack and/or subtitle language selected at DVD initial settings must exist on the disc. 49-50 No subtitles...Subtitles appear only when available on disc.50 Select “ON” at the “Subtitle language” section to display subtitles.50 Alternative audio soundtrack (or subtitle) language cannot be selected...Alternative language cannot be selected with discs which do not contain more than one language.49 For some discs, alternative language cannot be selected with the AUDIO or SUB TITLE button. Try selecting it from the DVD menu if available.49 Angle cannot be changed...This function is dependent on software availability. Even if disc has multiple angles, they may be recorded for specific scenes only (ANGLE Indicator on unit lights up). 61 Miscellaneous Video cassette cannot be inser ted...Insert the cassette window side up; record tab facing you. 8 Video cassette cannot be removed...Completely insert Power Plug into an AC outlet. 12 Eject does not function or insertion cannot be done...Turn the POWER off and then on, and try ejecting or inserting the tape again. Video cassette ejects when a recording is started, or the power is turned off for timer recording...Make sure cassette record tab is intact. 8 In Stop mode, the VCR motor (CYLINDER) continues to rotate...To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1- 800-211-PANA(7262). To locate an authorized servicenter call toll free 1- 800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com /contactinfo
70For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo