Panasonic Tv Dvd Vcr Combination Pv Df2036 Operating Instructions

							11
Getting Started
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and 
speakers. There are two types of connection, digital and analog.
Connect an AV amplifier with Dolby Digital or DTS 
decoders

						

							12For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connect an analog amplifier to enjoy high-quality stereo sound 
with sampling frequencies of 96 kHz.

						

							13
TV Operation
POWER
ACTION
SELECT
▲▼◄►/
SET
STOP
POWER PLAY
Tuning TV
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
Settings are made automatically. When 
complete, this screen appears.If setup is incomplete, the following 
screen appears. Check connection of 
Antenna/Cable to the RF in Terminal, 
then try to manually set the clock as 
follows.
a.  Press ACTION on the Remote Control to display 
SET CLOCK Menu screen.
b. Press ▲▼ to select the month and press SET to 
set. In the same manner, select and set the date, 
year, time, and DST (Daylight Saving Time).
• Press ◄ repeatedly to move the cursor. Press ▲▼ to make a 
correction.
c.  Press ACTION twice to start CLOCK and exit. 
Case 1
Case 2
  Initial Setup (Ready to Play)
•  Function buttons are void during Initial Setup.
•  To eject a tape during Auto Set, press the unit STOP/EJECT button twice. 
Then, make settings manually. (See pages 14-15.)
•  If Auto Clock Set takes more than 30 minutes, press STOP and perform 
settings manually. (See pages 14-15.)
1  Press POWER on the Remote Control or unit. Auto 
channel and clock set start.
•  If you use a cable box, turn it on and set it to the Public Broadcasting 
Service (PBS) channel in your time zone. If you use a DSS receiver, 
it must be turned off.
5 Press ▲▼ to select “AUTO SET,” then press SET.
Note:•  After Channel Auto Set is finished, Clock Auto Set will be performed. (If 
clock is set manually, Clock Auto Set will not be performed.)
2 Press ▲▼◄► to select “CH.”
3  Press SET to display SET UP CHANNEL screen.
1  Press ACTION to display MAIN MENU.
 
Automatic Channel Setting
4 Press ▲▼ to select “ANTENNA,” then press SET to 
set your antenna system (“TV” or “CABLE”).
 CH AUTO SET PROCEEDING
     AUTO CLOCK SET
       PROCEEDING
  CANCEL:STOP
  5/16/2006 TUE 11:45AM
                DST:ON
     SETTING : CH 10
     AUTO CLOCK SET
       COMPLETED
     AUTO CLOCK SET
     IS INCOMPLETE
 PLEASE SET CLOCK BY
 PRESSING ACTION KEY
       SET CLOCK
  1/ 1/2006 SUN 12:00AM
                DST:ON
 
 SELECT:         SET:SET
 START :ACTION
       SET CLOCK
  5/16/2006 TUE 11:45AM
                DST:ON
 
 SELECT:         SET:SET
 START :ACTION
        MAIN MENU
   DVD    LOCK LANGUAGE
    TV    CLOCK   CH
 SELECT:         SET:SET
 END   :ACTION
     SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
 
 
 SELECT:         SET:SET
 END   :ACTION
CH ▲▼ADD/DLT NUMBER Keys
FF STOP/EJECT 
						

							14For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

						

							15
TV Operation
4 Press ▲▼ to select “TIME ZONE ADJUST” and 
press SET to subtract or add hour(s) as necessary.
5  Press ACTION twice to exit.
(Only when Auto Clock is set.)
2 Press ▲▼◄► to select “CLOCK.”
3  Press SET to display SET CLOCK screen.
 
Time Zone Adjust
2 Press ▲▼◄► to select “LANGUAGE.”
3  Press SET repeatedly.
1  Press ACTION to display MAIN MENU.
4  Press ACTION to exit.
For French For SpanishFor English
  Change Language Setting
 
Reset all unit Memory Func tions
Returns to factory setting. Use if relocating unit, or if Initial Setup 
needs to be redone.
• Make sure a tape and/or disc is not inserted in unit.
1  Turn the unit Power on.
2  Hold down both PLAY and FF on the unit for more 
than 5 seconds.
• The power will shut off.
• Please ignore “NO CASSETTE” warning.
3  Perform “Initial Setup” on page 13.
EnglishSpanish
French
+10-1
Note:•  If set manually time zone does not appear.
1  Press ACTION to display MAIN MENU.
        MAIN MENU
   DVD    LOCK LANGUAGE
    TV    CLOCK   CH
 SELECT:         SET:SET
 END   :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST :+1
SELECT: SET:SET
END :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT: SET:SET
END :ACTION
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
MENU
DVD BLOCAGE LANGUE
TELE HORLOGE CANAL
SEL.: REGLER:SET
FIN :ACTION
MENU PRINCIPAL
DVD BLOQUEO IDIOMA
TV RELOJ CANAL
ELEGIR: FIJAR:SET
TERMINAR:ACTION
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION 
						

							16For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
TV Operation

						

							17
TV Operation
You can hear a deeper, 3-D sound effect using just the unit’s two 
front speakers.
1 Press SURROUND.•”SURROUND ON” is displayed.
Notes:•  Surround sound effect is not available for normal (mono) broadcasts.
•  The surround effect (TV, VCR mode only) is not output to Audio Output 
L/R Connector.
  Surround Sound System
To Cancel, press SURROUND.
When “ON” is selected, the picture is displayed even when a 
broadcast signal is weak or non-existent.
ON:
Picture is displayed regardless of signal condition, and may not 
always be clearly visible.
OFF:
Screen turns solid blue when signal is absent or weak.
1  Press ACTION to display MAIN MENU.
2 Press ▲▼◄► to select “CH.”
3  Press SET to display SET UP CHANNEL screen.
6  Press ACTION twice to return to the normal screen.
4 Press ▲▼ to select “WEAK SIGNAL DISPLAY.”
5  Press SET to set “ON” or “OFF.”
Note:•  If the unit is connected to equipment which has a blue screen feature, 
selecting “ON” will have no effect on the other equipment.
  Weak Signal Display Feature
Press R-TUNE to display the last channel you were watching.
Press MUTE to instantly mute the sound. Press again to 
restore the previous sound level.
  Audio Mute
 
Rapid Tune
        MAIN MENU
   DVD    LOCK LANGUAGE
    TV    CLOCK   CH
 SELECT:         SET:SET
 END   :ACTION
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
SELECT: SET:SET
END :ACTION 
						

							18For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
MTS Broadcast / TV Stereo System
The following are possible audio broadcast types and on-screen 
displays. The signal being received is indicated with a “ 
 ” mark 
while the selected audio mode is indicated with an arrow. To 
change the audio mode for these broadcasts, see the “Audio Mode 
for TV Viewing” section.
1  Press DISPLAY to display the broadcast signal 
being received.

						

							19
TV Operation
This unit can be set to automatically power on in one of 3 modes 
(TV, VCR Playback, or Disc.)Note:
•  If no button on the remote or unit is pressed within 60 minutes after unit 
turns itself on, it will turn itself back off.
1  Press PROG to display SET PROGRAM screen.
To Cancel ON TIMER,
Repeat steps 1-3. Then, press ADD/DLT to clear the time in 
steps 4-5. Now, press PROG to end. “ON TIMER END” briefly 
appears on-screen.
2 Press ▲▼ to select “ON TIMER.”
3  Press SET to display ON TIMER screen.
4 Press ▲▼ to select desired settings.
5  Press SET to set the ON TIMER time and ON TIMER 
mode.
To Make Corrections, use ▲▼ and ◄ ► to move back 
and correct.
6  Press PROG to set ON TIMER.•  “ON TIMER SET” is displayed.
•  ON TIMER Indicator lights up on the unit.
This unit can be set for auto power off.
1  Press PROG to display SET PROGRAM screen.
2 Press ▲▼ to select “SLEEP TIMER.”
3  Press SET repeatedly to select the desired time.
To cancel, press SET repeatedly 
until 0 appears.
4  Press PROG to return to the normal screen.
•  Pressing DISPLAY with sleep timer set displays remaining time.•  Make sure a tape is inserted if Playback 
mode is selected.
•  Make sure a disc is inserted if Disc 
(DVD/CD/Video CD) mode is selected.
  ON TIMER 
Sleep Timer
PROG DISPLAY
ADD/DLT
3060
090
ON TIMER mode 
selection order
CH01
CH125
Disc
VCR
Lowest 
channel
Highest 
channel
ON TIMER 
Indicator
TV Timer Features
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT: SET:SET
END :PROG
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROGSET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROG
       ON TIMER
     6:--AM  CH --
 
 SELECT:         SET:SET
 END   :PROG
SELECT
▲▼◄►/
SET 
						

							20For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Closed Caption System
Closed Caption is ...
This multi-use system not only allows the hearing impaired to 
enjoy selected programs, but also allows one to watch programs 
with the volume muted.
1  Press ACTION to display MAIN MENU.
8  Press ACTION three times to return to the normal 
screen.
2 Press ▲▼◄► to select “TV.”
4 Press ▲▼ to select “CAPTION”.
5  Press SET to display CAPTION screen.
6 Press ▲▼ to select “CAPTION MODE.”
7  Press SET repeatedly to select mode.
 
Closed Caption Mode Feature
3  Press SET to display SET UP TV screen.