Panasonic Tv Dvd Vcr Combination Pv Df203 Operating Instructions

							5151
Advanced Operation
 
SET : SET END : D I SPLAY
PLAY
REPEAT : CHAPTER 
SET : SET END  : D I SPLAY
PLAY
REPEAT : D I SC  
RANDOM  PLAY
TITLEchapterchapter
chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
 CHAPTER/TITLE REPEAT PLAY (DVD) TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference
a. Repeat Play
 
Unit information screen 
 Select “REPEAT”, and press SET.
  Change the desired mode during play by pressing  , and press SET.
*Important: If a remote control button does not work when pressed, press the DVD button on the 
remote and try the button again.
  For repeat play in VCR mode, see page 31.
b. Play mode [Video CD/ CD only] (See page 47 or 48.)
a
b
tracktrack
track
TRACK REPEAT
DISC REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
DVD CHAPTER REPEAT TITLE REPEAT REPEAT OFF
Video CD/CD TRACK REPEAT DISC REPEAT REPEAT OFF
PROGRAM PLAY program play
RANDOM PLAY random play
---- normal play 
						

							52For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MP3/WMA/JPEG Playback Operation
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00   ROOT                   . .               
  My favorite          CAR1
  TECHNO             CAR2
  POPS                  END_WALTZ  JAZZ                   PICTURES
                              
1
Press POWER* on the 
remote or unit.
Press OPEN/CLOSE, 
and then place an 
MP3/WMA/JPEG disc 
into the disc tray. Press 
OPEN/CLOSE to close.
2
This unit can play MP3/WMA/JPEG 
format CD-R or CD-RW recorded for 
personal use on a PC, etc.
Some discs may not play due to 
recording condition.
3
 MP3/WMA/JPEG menu 
is displayed.
 Playback starts 
automatically (except 
JPEG  les).
  CD directory is displayed.
ROOT
My favorite
TECHNO
POPS
JAZZ.wma
CAR1.jpg
CAR2.jpg
END
_WALTZ.mp3
PICTURES
picture1.jpg
picture2.jpg
picture3.jpg
picture4.jpg
Function 
StatusCounter
PLAY MODE
Folder area(Current folder 
appears green.)
File area (Selected 
 le/folder is 
highlighted. 
Titles are 
displayed up to 
11 characters.)
  :MP3  le           
:WMA  le       
:JPEG  le
 
:Folder             
:Parent folder
Press   
 to select the desired 
PLAY MODE.
Press     to move cursor to 
File area or PLAY MODE. 
(In STOP mode)
4
Select an MP3/WMA  le ( /). MP3/WMA Playback (See next page)
Select a Parent folder ( 
).Make changes to the previous 
directory display.
Select a folder (  ).Display  les/folders contained in the 
folder.
Select an JPEG  le ( 
). JPEG Playback (See next page)
5
Press ACTION to 
return to the DVD MAIN 
MENU. (Press ACTION 
again to return to the 
MP3/WMA/JPEG MENU.)
PLAY 
MODE:MP3/WMA PlaybackJPEG Playback 
- Slide-show -
NORMALAll MP3/WMA  les are 
selected and played back 
one time only.All JPEG  les are selected 
and played back one time 
only.
SINGLE 
REPEATThe selected MP3/WMA  le 
is played back repeatedly.The selected JPEG  le is 
played back repeatedly.
FOLDER 
REPEATThe MP3/WMA  les 
contained in the selected 
folder are played back 
repeatedly. However, folders 
below the selected folder are 
not played back.The JPEG  les contained in 
the selected folder are played 
back repeatedly. 
However, folders below the 
selected folder are not played 
back.
DISC 
REPEATAll MP3/WMA  les are played 
back repeatedly.All JPEG  les are played 
back repeatedly.
  PLAY MODE selection
Press   
 to select items and SET 
or PLAY 
  to start.
 
MP3/WMA/JPEG MENU SCREEN
Windows Media, and the Windows logo are trademarks, 
or registered trademarks of Microsoft Corporation in 
the United States and/or other countries. WMA is a 
compression format developed by Microsoft Corporation. 
It achieves the same sound quality as MP3 with a  le size 
that is smaller than that of MP3.
Example: If the CD-R/CD-RW 
 le hierarchy is displayed on the
PC as shown in diagram at left,
MP3/WMA/JPEG Menu Screen, 
like the one below is displayed.
  File names are displayed in 
ascending order (1, 2, 3...9, A, B, 
C...Y, Z) in the MP3/WMA/JPEG 
MENU Screen ROOT.
■ File area Operation 
(In STOP mode)
■ Play mode Operation 
(In STOP mode)
Explanation of Icons
MPEG Layer-3 audio decoding technology licensed from 
Fraunhofer IIS and Thomson multimedia.
Press SKIP+  | (next) or SKIP- | (previous) to skip a  le/folder 
page (7 les) in the File area.
Note 
						

							5353
Advanced Operation
SELECT      
SET
POWER OPEN/
CLOSE
ANGLEPLAY
FF/SLOW+
ZOOM SKIP+ 
|
REW/
SLOW-
STOP
STILL/
PAU S E
SKIP- 
|
ACTION
MP3/WMA PlaybackJPEG Playback
Press     to select an JPEG  le ( 
).
Press SET or PLAY. Selected  le is  
displayed.
1
2
 
■Next/Previous Search
Press SKIP+ | or SKIP- |.
JPEG Playback Screen

Do steps 1~3 on page 52.
Press ACTION to return to the DVD MAIN 
MENU.
3
■ Start Slide-show
Press FF/SLOW+ or REW/SLOW-. 
(see next page)
■  Enlarging an image
Press ZOOM. (see next page)
■  Rotating an image
Press ANGLE. (see next page)
■  Returned on the MP3/WMA/JPEG MENU
Press STOP. (see previous page)
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00   ROOT                   . .               
  My favorite          CAR1
  TECHNO             CAR2
  POPS                  END_WALTZ  JAZZ                   PICTURES
                              
ROOT
My favorite
CAR1.jpg
CAR2.jpg
END
_WALTZ.mp3
PICTURES
picture1.jpg
SKIP+ |SKIP- |
 

Only the JPEG 
 les in a folder that 
were saved while 
being displayed 
are displayed. You can play JPEG images.
Displayable Image Size: 32x32~7680x7680 pixels
  Some JPEG format may not be played back.
■  Forward/ Reverse Search
    Press FF/SLOW+ or REW/SLOW- during play.
    Press PLAY to release.
      Search speed, slow at  rst, increases with 
each additional press of the button up to 5 
levels.
■  Forward/ Reverse Track  Skip  
     Press SKIP+ 
| or SKIP- | during play.
     Each press skips a track. 
      If pressed within  rst 3 seconds of playback, 
skips to the previous track. If over 3 seconds, 
returns to top of track. (SKIP- 
| only.)
      Put unit in Stop mode before performing 
folder/ le selection (see step 4 on previous 
page.)
■  Pause
     Press PAUSE during play.
Press PLAY to release.
Press SET or PLAY to start playback.2
3
4
Press OPEN/CLOSE to eject the disc. The MP3 MENU is closed automatically.
Press STOP to stop play.
  Copyright protected  les and  les containing errors 
cannot be played back. The unit skips to the next  le.
Press   
 to select an MP3/WMA  le  
(
   / 
) in STOP mode.
1
Do steps 1~3 on page 52.
Note
Note 
						

							54For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MP3/WMA/JPEG Playback Operation (continued)
■ Still picture
Press PAUSE (only SLIDE)
■ Forward/Reverse Track  Skip
Press SKIP+ 
| or SKIP- |. Each press 
skips a  le.
■  Cancel slide show
Press STOP to return to the MP3/WMA/JPEG 
MENU. (During JPEG Playback.)
JPEG  les are displayed automatically (about 
every 3 seconds) as a slide-show.
Image changes every 3 seconds.
JPEG Playback - Slide-show -
Press FF/SLOW+ or REW/SLOW-.  
1


FF/SLOW+  REW/SLOW- 
Press ACTION to return to the DVD MAIN 
MENU.
2
(During JPEG Playback.)You can enlarge speci c portions of a JPEG 
picture and select the zoom ratio using the ZOOM 
button on the remote.
Set Zoom size.
Press ZOOM repeatedly to change display as 
follows.
Press STOP to return to the MP3/WMA/JPEG 
MENU.
  You can enlarge the center portion of the image to 
one of 2 magni cations.
  Operation can be done during Rotation (below).
■ Use the   ,  
,  
 and  
 buttons to move the 
position up, down, left and right.
JPEG Playback - Zoom -
JPEG Playback - Rotation -
(During JPEG Playback.)You can rotate a JPEG picture using the ANGLE 
button on the remote during JPEG Playback. (The 
JPEG picture will be rotated 90 ° clockwise.)
Set rotation.
Press ANGLE repeatedly to change display 
as below. (During JPEG Playback screen)
Press STOP to return to the MP3/WMA/JPEG 
MENU.
1st Press
2nd Press
3rd Press
ROOT
My favorite
TECHNO
CAR1.jpg
CAR2.jpg
END
_WALTZ.mp3
PICTURES
picture1.jpg
picture2.jpg
picture3.jpg
picture4.jpg
X 1.0 (ORIGINAL)
3rd press
X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)
1st press2nd press 
Image changes every 3 seconds.
picture 1 picture 2 picture 3 picture 4
picture 3 picture 2 picture 1
  Operation can be done during ZOOM (above).
  The vertical/horizontal ratio of rotated JPEG 
images may vary when they are displayed.   Position cannot be changed on X1.0 ORIGINAL 
images.
If FF/SLOW is pressed while picture 1 is displayed.
If REW/SLOW- is pressed while picture 3 is 
displayed.Only the JPEG  les in a folder that were saved 
while being displayed are displayed.
4th Press
Note
Notes 
						

							5555
Advanced Operation
To change DVD LOCK settings 
After entering your secret code in 
step 3 on page 36, select “OFF” to 
deactivate DVD Lock or change the 
rating level. 
1
1) Press   
* to select 
“DVD LOCK.”
2) Press SET to set “ON” 
or “OFF.”
DVD Lock Ratings (DVD only)
■ “ON” ➞ DVD Lock is activated.
■ “OFF” ➞ DVD Lock is deactivated.
LEVEL 1: LOCK ALL:
Playback of all DVDs, CDs and Video 
CDs is prohibited. (Use to prohibit play of 
mature theme DVDs not encoded with a 
rating level.)
LEVEL 2:  DVDs expressly for children can be played 
back.
LEVEL 3 to 7:  DVDs for general audiences/children 
can be played back. (DVDs with mature 
content are prohibited.)
LEVEL 8:  NO LIMIT: (Factory preset)
All DVDs can be played back.
You can prevent playback of DVDs with a speci c rating level which may be unsuitable for children.  Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback 
will be prohibited.

After DVD Lock is set and a blocked DVD 
is played, this message will appear. The 
message may differ depending on the 
disc.
To continue viewing a blocked 
program for now,
Press 
  
 to select “YES” and SET. 
Then, enter your 4-digit secret code. 
When “NO” is selected, blocked programs 
cannot be viewed.
  Ratings which are highlighted in Green will be blocked; those 
not highlighted (white letters) will not be blocked.
Perform DVD Lock setting in TV mode. 
Enter your secret code to display LOCK menu.
(Perform “Enter Secret Code” steps on page 36.)
US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET   END       : ACT I ON   
           LOCK    
 NEXT   PAGE
SELECT : 
SET : SET END : D I SPLAY,
YOUR  SELECT I ON  EXCEEDS  THE
PLAYER  S  RAT I NG  LIMIT.
DO  YOU  WANT  TO  CHANGE  THE
LIMIT?
YES
NO
Discs not encoded with a rating level will play even if the jacket states it is for mature audiences. 
For these discs, the DVD Lock Ratings will not work.
Caution
2
1) Press   
 to select 
“CHANGE SETTINGS.”
2) Press SET to display 
screen.US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET  END       : ACT I ON   
           LOCK    
 NEXT   PAGE
3
1) Press    
  
 to select 
rating level.
2) Press SET to 
select “LOCKED” or 
“UNLOCKED.”
   LOCK  ALL  SELECT :                   SET : SETEND       : ACT I ON   
1
2345 
6
7      
8     
UNLOCKED
4Press ACTION three times to exit.
*Important:If a remote control button does not work when 
pressed, press the TV/VCR , DVD button on the 
remote and try the button again.
SELECT
      
SET ACTION
DVD Lock Feature

PROGRAM  RATING  EXCEEDED 
						

							56For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DISC LANGUAGES (DVD only)
To select and set the language of the audio soundtrack, 
subtitles, or title/DVD menus for all discs to be played.
“AUDIO” selectionsTo select the audio soundtrack language.
(Factory preset: English)
English/Spanish/French/Japanese
Original: Original disc language
OTHER 
✱✱✱✱: Other language selection*1
“SUBTITLE” selectionsTo select the subtitle language.
(Factory preset: AUTO)
AUTO:Same language selected for “AUDIO” 
              If language set for “AUDIO” is 
used in playback, subtitles will not 
appear. 
              If another language is used during 
playback, the subtitles will appear 
in the language selected at “AUDIO” 
setup.
English/Spanish/French/Japanese
OTHER 
✱✱✱✱: Other language selection*1
“MENUS” selections(Factory preset: English)
To select the language used in title menus or 
DVD menus.
English/Spanish/French/JapaneseOTHER 
✱✱✱✱: Other language selection*1
To enter OTHER ✱✱✱✱ code number,
Press NUMBER keys (Please refer to 
language codes on page 59).
To make corrections, press 
   repeatedly to 
delete language code number, and correct.
1
3
Once initial settings are done, they remain 
in memory (even after the power is off) until 
changed. This means the unit will always 
operate under the same conditions (especially 
DVDs) each time.
DISC LANGUAGES (See below.)Any languages offered on the disc can be set. If a 
language not offered is set, the original disc language 
will be selected.
AUDIO OUTPUT (See page 57.)You can set the audio output that comes from the 
digital audio output terminal.
STILL MODE (See page 58.)To select “FIELD” or “FRAME” to prevent jitter or to 
make small text or  ne patterns clearly visible in a still 
picture. When “AUTO” is set, “FIELD” or “FRAME” is 
selected automatically.
TV MODE (See page 58.)To select whether the video material for a wide-screen 
will be played back in Pan & Scan style or in Letterbox 
style.
4
1) Press  to 
select “DISC 
LANGUAGES.”
2) Press SET to 
display screen. Press ACTION* in Stop mode to display 
MAIN MENU.
1) Press     to 
select an item.
2) Press SET to set.
2
1) Press    
  
 to 
select “DVD.”
2) Press SET to 
display screen.
1) Press     to 
select an item.
2) Press SET 
repeatedly for 
desired language. 
(Please refer right.)
5
6
Press ACTION to redisplay DVD MAIN 
MENU and go to step 3 to setup another item. 
Or, press ACTION three times to exit.
*1If the selected language is not offered, the 
original disc language is selected.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3  Pan &  Scan
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3  Pan &  Scan
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
Settings for DVD Operation
D I SC  LANGUAGES
SELECT :  
SET : SET
END : ACT I ONAUDIO: EnglishSUBT I TLE : AUTO
MENUS : English
  Unit is in TV-VCR mode, press TV/VCR. 
 Check List 
						

							5757
Advanced Operation
*Important:  If a remote control button does not work when pressed, press the TV/VCR , DVD 
button on the remote and try the button again.
 Make settings according to ampli er 
connected to optical audio output as shown 
in above table.
*1  When connecting an ampli er (with an 
optical digital input connector) which 
does not contain the Dolby Digital or 
dts decoder, be sure to select “PCM.”  
If “Bitstream” is selected, starting DVD 
play may cause such a high level of noise 
as to be harmful to your ears and damage 
the speakers.
*2  When a dts decoder is connected, please 
select “Bitstream” in “dts.” If “PCM” is 
selected, there will be stereo sound.
AUDIO OUTPUT
Select the digital output to be output from the optical 
digital audio output connector of the unit.
Do steps 1 and 2 on page 56.
■  “LPCM (DVD)” selectionsOFF:  Linear PCM of less than 48 kHz/16 bit 
is output. When playing DVDs recorded 
in linear PCM of over 48 kHz/20 bit, no 
digital audio is output. (Factory preset)
PCM:   When playing DVDs recorded in 
linear PCM of 48 kHz/20 bit/24 bit or 
more, digital audio converted to 44.1 
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted 
to48 kHz/16 bit or below for copyright 
protection.)
■  “Dolby Digital” selectionsBitstream:  Dolby Digital bitstream (1ch-5.1ch) is 
output. (Factory preset)
PCM:  When you have connected a ampli er 
that doesn’t have a built-in Dolby Digital 
decoder.
■ “dts” selectionsBitstream:  dts bitstream is output. (Factory preset)
PCM:  When you have connected a ampli er 
that doesn’t have a built-in dts decoder.
■  “DRC (Dynamic Range Compression)” 
selections
OFF:  Normal audio range is selected. (Factory 
preset)
ON:  For dynamic sound even at low volume, 
this is useful for late-night listening. 
[Dolby Digital DVDs only].
1) Press     to 
select an item.
2)  Press SET  
repeatedly for 
output. (See 
below.)
1) Press   to 
select “AUDIO 
OUTPUT.”
2) Press SET to 
display screen.
1
3 2
4
Press ACTION to redisplay DVD MAIN MENU 
and go to step 2 to setup another item. Or, 
press ACTION three times to exit.
AUD I O  OUTPUT
SELECT :  
SET : SET
END : ACT I ONLPCM(DVD) : OFFDolby  Digital : Bitstream
dts : Bitstream
DRC : OFF
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
Type of 
ampli er 
to be 
connectedRecommended setting
LPCM
(DVD)Dolby
Digitaldts
No ampli er 
is connected
AV ampli er 
without Dolby 
Digital/dts 
decoder
PCM PCM*1PCM*1
AV ampli er 
including 
Dolby Digital 
decoder
PCMBitstreamPCM
AV ampli er 
including 
Dolby 
Digital/dts 
decoder 
PCMBitstream Bitstream*2
SELECT
   
  
SET ACTION 
						

							58For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
STILL MODE
1
1) Press    * to select 
“STILL MODE.”
2) Press SET repeatedly 
for mode. (See below)
2
Do steps 1 and 2 on page 56.
AUTO:    “FIELD” (Field still) or “FRAME” (Frame still) 
is automatically selected during the still mode. 
(Factory preset)
FIELD:    “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared 
with “AUTO” on some discs.
FRAME: “FRAME” (Frame still) is always selected. 
Some texts and  ne patterns will be seen clearly 
when compared with “AUTO” on some discs.
Selecting TV MODE 
a
1) Press     to select “TV 
MODE.”
2) Press SET repeatedly 
for mode. (See below.)
b
Do steps 1 and 2 on page 56.
4:3 Pan & Scan : Widescreen video data is played in Pan 
& Scan style (left and right of screen is 
trimmed.)
                               Video data not formatted in Pan & 
Scan will play in letterbox style.
4:3 Letterbox :     Widescreen video data is played in 
Letterbox style (top and bottom of 
screen has black margin).
Set the screen display style for widescreen video material 
playback.
4:3 Pan & Scan (Factory preset)
4:3 Letterbox
Set to reduce jitter in a displayed still picture or a motion 
picture.
3
Press ACTION twice to exit this mode.
Press ACTION twice to exit this mode.c
Example
(Factory preset)
*Important:
    If a remote control button does not 
work when pressed, press the DVD 
button on the remote and try the 
button again.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3  Pan &  Scan
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3  Pan &  Scan
SELECT   
  
SET ACTION
Settings for DVD Operation (continued) 
						

							5959
For Your  Information
CodeLanguage
6565Afar
6566Abkhazian
6570Afrikaans
6577Ameharic
6582Arabic
6583Assamese
6588Aymara
6590Azerbaijani
6665Bashkir
6669Byelorussian
6671Bulgarian
6672Bihari
6678Bengali;Bangla
6679Tibetan
6682Breton
6765Catalan
6779Corsican
6783Czech
6789Welsh
6865Danish
6869German
6890Bhutani
6976Greek
6978English
6979Esperanto
6983Spanish
6984Estonian
6985Basque
7065Persian
7073Finnish
7074Fiji
CodeLanguage
7678Lingala
7679Laothian
7684Lithuanian
7686Latvian, Lettish
7771Malagasy
7773Maori
7775Macedonian
7776Malayalam
7778Mongolian
7779Moldavian
7782Marathi
7783Malay
7784Maltese
7789Burmese
7865Nauru
7869Nepali
7876Dutch
7879Norwegian
7982Oriya
8065Panjabi
8076Polish
8083Pashto, Pushto
8084Portuguese
8185Quechua
8277Rhaeto-Romance
8279Romanian
8285Russian
8365Sanskrit
8368Sindhi
8372Serbo-Croatian
8373Singhalese
CodeLanguage
7079Faroese
7082French
7089Frisian
7165Irish
7168Scots Gaelic
7176Galician
7178Guarani
7185Gujarati
7265Hausa
7273Hindi
7282Croatian
7285Hungarian
7289Armenian
7365Interlingua
7378Indonesian
7383Icelandic
7384Italian
7387Hebrew
7465Japanese
7473Yiddish
7487Javanese
7565Georgian
7575Kazakh
7576Greenlandic
7577Cambodian
7578Kannada
7579Korean
7583Kashmiri
7585Kurdish
7589Kirghiz
7665Latin
CodeLanguage
8375Slovak
8376Slovenian
8377Samoan
8378Shona
8379Somali
8381Albanian
8382Serbian
8385Sundanese
8386Swedish
8387Swahili
8465Tamil
8469Telugu
8471Tajik
8472Thai
8473Tigrinya
8475Turkmen
8476Tagalog
8479Tonga
8482Turkish
8484Tatar
8487Twi
8575Ukrainian
8582Urdu
8590Uzbek
8673Vietnamese
8679Volapük
8779Wolof
8872Xhosa
8979Yoruba
9072Chinese
9085Zulu
Enter the appropriate code number for the initial settings “AUDIO,” “SUBTITLE” and/or “MENUS” (see 
page 56).
Language Code List 
						

							60For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Check the following points once again if you are having trouble with your unit.
Before Requesting Service
Power Correction
No power…  Completely insert Power Plug into an AC outlet.
  Set POWER button to ON.
Power turns itself off...
 Auto power-off (shut off) occurs after about 5 min. in DVD mode with no 
operation, or if there is no broadcast signal in TV or Playback mode. Turn the 
power back on.(P
. 21, 33)
Monitor Correction
No picture or sound...  Make sure your antenna system (TV or CABLE), is correctly set. (P. 11)
  Completely insert Power Plug into an AC outlet.
 Set POWER button to ON.
Poor picture with normal 
sound...  Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP 
Video Adjustment. (P. 43)
Poor sound with normal 
picture...  Adjust VOLUME control. (P. 22)
Poor TV reception...
  Adjust SHARPNESS and PICTURE controls in the SET UP Video 
Adjustment. (P. 43)
No color or poor color... Adjust TINT and COLOR controls in the SET UP Video Adjustment. (P. 43)
Ghost (multiple) 
images...  Install a directional antenna.
TV programs cannot be 
watched...
  Make sure the selected channel is in unit’s memory. (P. 16)
Channel cannot be 
selected...
  Only the channel being recorded can be viewed on this unit.
VCR Correction
TV program cannot be 
recorded...  Make sure your antenna system (TV or CABLE), is correctly set. (P. 11)
 Make sure cassette record tab is intact. (P. 4)
Timer recording cannot 
be performed…
  Check that clock is set to current time and date.
  Make sure DSS/CABLE box (if used) is left on and tuned to channel to be 
recorded.
  Set recording Start/Stop times correctly. (P. 28-29)
  Timer recording may not be performed or continued if a power interruption of 
more than 1 minute occurs before or during a Timer Recording, even after 
power is r
estored.
No playback picture, or 
the playback picture is 
noisy or contains 
streaks...  Adjust TRACKING control in either direction. (P. 6)
  Try Head Cleaning. (P. 6)
VCR cannot be 
controlled...
 Make sure VCR LOCK is set to off. (P. 35)
Remote Control Correction
Unit cannot be 
controlled...
  Aim Remote directly at the remote sensor on the unit. (P. 9)
  Avoid any object blocking signal path.
  Inspect the remote batteries. (P. 4)
  Make sure VCR LOCK is set to off. (P. 35)
  Exposing unit remote sensor to direct  uorescent or outdoor lig
ht may cause 
signal interference.
ACTION, PLAY, 
SELECT, SET POWER, 
etc. buttons cannot be 
selected...  Press TV/VCR for TV-VCR mode. (P. 18)
  Press DVD for DVD mode. (P. 20) 
 Che
ck remote batteries.