Panasonic Tv Dvd Vcr Combination Pv Df203 Operating Instructions

2121
Basic Operation
  Please read the disc jacket for operation information.
  If a single sided disc is placed in upside down, “THIS 
TYPE OF DISC CANNOT BE PLAYED. PLEASE 
INSERT A DIFFERENT DISC” is displayed.
  Remove disc and press unit POWER off when not in 
use.
  Disc continues to rotate with menu displayed even 
after play is done. Press STOP to clear menu display 
when  nished with menu.
■  Forward/ Reverse rapid scene search 
     ➞ Press FF/SLOW+ or REW/SLOW- 
during play.
    
➞ Press...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
TV Operation
1
Press POWER* on the remote or unit.
■  Using the 100 key
When selecting CABLE channels 100 to 125 with 
the NUMBER keys,  rst press the 100 key, and 
then enter the remaining two digits.
■  Rapid Tune
Press R-TUNE to display the last channel you 
were watching.
■  Audio Mute
Press MUTE...

2323
TV Operation
DISPLAY
AUDIO
MTS Broadcast/TV Stereo System
  Receivable Broadcast Types
The following are possible audio broadcast types and 
on-screen displays. The signal being received is indicated with 
an “ 
   ” mark while the selected audio mode is indicated with 
an arrow. To change the audio mode for these broadcasts, see 
the “Audio Mode for TV Viewing” section below.
Press DISPLAY to display the broadcast signal being 
received.
MTS Stereo and SAP broadcastMulti-channel Television Sound...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
  Closed Caption Mode Feature
1
This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes 
useful information from TV stations available to everyone.
Press ACTION* to display MAIN MENU.Closed Caption Mode Selections 
Caption Mode: CAP C1 or C2
A narration of...

2525
TV Operation
1
  Caption On Mute Feature
Closed Caption narration, if available, is displayed when 
MUTE button is pressed for silence. 
Press ACTION to display MAIN MENU.
  When a disc supporting closed caption is 
used, the subtitle and the closed caption 
may overlap. In this case, turn the subtitle or 
caption on mute mode off. (See page 44.)
2
1) Press    
  
 to select 
“TV.”
2) Press SET to display 
SET UP TV screen.
6
Press ACTION three times to return to the normal 
screen.
7
Press MUTE to...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
TV Timer Features
1
  ON-TIMER with Alarm
This unit can be set to automatically power on in one of 
3 modes (TV, VCR Playback, or DVD/Video CD/CD.) 
You can also combine the On-Timer with a one minute 
alarm that gradually increases in volume.
  If no button on the remote or unit (including a 
button...

2727
TV Operation
  TV/VCR Status & Clock Display
Press DISPLAY to display or remove the overlay.
 
Blue Screen Display
When a function button is pressed (PLAY, FF, etc.) or you change 
channels, the unit mode or channel number will be displayed.
CH08
  Channel & Function Display
PLAY
Whenever a blank section of a tape comes up in Playback 
mode, or when the selected channel has no broadcast signal 
with the Weak Signal Display Feature set to “OFF” (see page 
34), the screen will turn solid blue.
REC...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
  Timer Recording
Press PROG to end 
the program. 
To Enter More 
Programs, 
press 
 to select 
and SET to set a 
blank program 
number, and then 
repeat step 3.
Press PROG twice to exit this mode.  If you’re using a cable box, make sure that it is tuned 
to the desired channel and the power is left...

2929
Timer Operation
Repeat steps 1 and 2 on page 28.
1
Press PROG twice to exit this mode.
2
3
To Clear program...
4
Press     to select 
the desired program.
  
1) Press SET to 
display.
2) Press 
    to select 
and press SET 
or 
 
  
 to set new 
program contents.
3) Press PROG.
  Cancel a Timer Recording: 
(Recording is in progress)
 
Hold down STOP for a few 
seconds to cancel the Timer 
Recording.
 Any future daily or weekly recordings will 
be performed as programmed.
Press ADD/DLT.
 
Review,...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are 
made, program index and information are also included. These index marks can be used to access or 
scan recordings.
1
Press SEARCH* 
in Playback or 
Stop mode to 
display INDEX...