Panasonic Tv Dvd Combination Pv 20df63 Operating Instructions

							4141
Advanced Operation
1
Press DISPLAY in Play or Stop mode to display 
“On-Screen Display.”
When DISPLAY is pressed, On-Screen Displays show disc 
information (title/chapter/track number, elapsed playing 
time) and unit information (Repeat Play, Play mode).
 Each press of DISPLAY changes the on-screen display 
as follows. (Please refer to page 42 or 43.)
3
1) Press   
 to select the setting.
2) Press SET to set. 
To return to the 
normal screen,
press CLEAR or 
DISPLAY repeatedly.

SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER: 11 0:12:34
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER :240:12:34
2
1) Press   
 (or  
  
) to select an item.
2) Press SET to set.

SET : SET NEXT : D I SPLAY
TRACK: 12 V I DEO  CD
PBC : OFF 0 : 12 : 34
SET : SET NEXT : D I SPLAY
TRACK :17V I DEO  CD
PBC : OFF 0 : 12 : 34
 When DISPLAY is pressed during 
play of a Video CD with Play control, 
the NUMBER keys are not available 
on the displayed screen. In this case, 
press DISPLAY again to remove the 
displayed screen.
 When 
   appears on the screen while 
a button is being pressed, it means 
that the corresponding operation is 
prohibited by the unit or the disc.   DISPLAY button does not function while DVD TITLE MENU 
is displayed.
DVD Operation using On-Screen Displays
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
NUMBER
keys
CLEAR
DISPLAY
Note
Notes
SELECT
SET
Selected disc information
Normal Screen
Selected unit information
  When numbers are 
displayed (e.g. title 
number), the NUMBER 
keys are also available.
  If the number entered 
is not on the disc, the 
entry will have no effect. 
Re-enter the correct 
number.
  For more details, refer 
to the disc operation 
information.
 Unit is in DVD mode, press DVD.
 Check List 
						

							42For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Detailed Descriptions of Each On-Screen Display
SELECT :  
SET : SET NEXT : D I SPLAY
T I TLE: 1 DVD
CHAPTER : 12 1 : 12 : 553
4
SET : SET NEXT : D I SPLAY
TRACK:    1 V I DEO  CD
PBC : OFF 1 : 35 : 12C
D
DVD Operation using On-Screen Displays (continued)
TITLE MENUDISPLAY ADD/DLT
+SKIPSKIPPLAY
SUB TITLEANGLE AUDIOCLEAR
ENTER
ACTION RETURN
S E T
NUMBER
keys
Disc information screen (for DVD)
  Track No. and elapsed playing time are not displayed during 
play started from menu of Video CDs with playback control.
 When 
   appears on the screen while a button is being pressed, 
it means that the corresponding operation is prohibited by the 
unit or the disc.
Disc information screen (for Video CD/ CD)
Notes
A. Track  No.
  Select “TRACK,” and press SET.
    Change the No. by pressing   or NUMBER keys, and 
press SET.
B. Playback control ON/OFF   [Video CD with playback control only]
ON Video CD menu play is displayed.
OFF Video CD menu play is not displayed.
C. Disc currently being played
Video CD CD
D. Elapsed playing time 1. TITLE No.
  Select “TITLE,” and press SET*.
    Change the No. by pressing   or NUMBER keys, and 
press SET.
2. Chapter No. 
  Select “CHAPTER,” and press SET.
    Change the No. by pressing   or NUMBER keys, and 
press SET.
3.  Disc currently being played
4.  Elapsed playing time
  The screen may be changed by selecting the elapsed time.
    Select the elapsed playing time (“xx:xx:xx”), and press SET.
    Change the elapsed time by pressing NUMBER keys.
Hours 
➞ Minutes ➞ Seconds are entered in order.
If the time entered is not on the disc, the entry will have 
no effect.
Re-enter the correct time.
e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.
Hour    Minutes  Seconds
  This function does not work with some discs.
1
2
A
B
SELECT
SET
SELECT :  
SET : SET NEXT : D I SPLAY
T I TLE: 1 DVD
CHAPTER : 12 1 :--:--
If SET is pressed while 
making entries, unit returns 
to the condition before 
entries were made. 
						

							4343
Advanced Operation
 
SET : SET END : D I SPLAY
PLAY
REPEAT : CHAPTER 
SET : SET END  : D I SPLAY
PLAY
REPEAT : D I SC  
RANDOM  PLAY
TITLEchapterchapter
chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
 CHAPTER/TITLE REPEAT PLAY (DVD) TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference
a. Repeat Play
Detailed Descriptions of Each On-Screen Display
*Important: If a remote control button does not work when pressed, press the DVD button on the 
remote and try the button again.
b. Play mode [Video CD/ CD only] (See page 39 or 40.)
a
b
tracktrack
track
TRACK REPEAT
DISC REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
DVD CHAPTER REPEAT TITLE REPEAT REPEAT OFF
Video CD/CD TRACK REPEAT DISC REPEAT REPEAT OFF
PROGRAM PLAY program play
RANDOM PLAY random play
---- normal play
  Unit information screen 
 Select “REPEAT,” and press SET.
  Change the desired mode during play by pressing  , and press SET. 
						

							44For assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected]
MP3/WMA/JPEG Playback Operation
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00   ROOT                   . .               
  My favorite           CAR1
  TECHNO             CAR2
  POPS                  END_WALTZ  JAZZ                   PICTURES
                              
1
Press POWER*  on the 
remote or unit.
Press OPEN/CLOSE,  and 
then place an 
MP3/WMA/JPEG disc into 
the disc tray.  Press 
OPEN/CLOSE  to close.
2
This unit can play MP3/WMA/JPEG 
format CD-R or CD-RW recorded for 
personal use on a PC, etc.
Some discs may not play due to 
recording condition.
3
 MP3/WMA/JPEG menu 
is displayed.
 Playback starts  automatically (except 
JPEG   les).
  CD directory is displayed.
ROOT
My favorite
TECHNO
POPS
JAZZ.wma
CAR1.j pg
CAR2.j pg
END
_WALTZ.mp3
PICTURES
picture1.jpg
picture2.jpg
picture3.jpg
picture4.jpg
Function 
Status Counter
PLAY MODE
Folder area(Current folder 
appears green.)
File area  (Selected 
 le/folder is 
highlighted. 
Titles are 
displayed up to 
11 characters.)
 :MP3   le           :WMA   le        :JPEG   le
 :Folder             :Parent folder
Press   
 to select the desired 
PLAY MODE.
Press    to move cursor to 
File area or PLAY MODE. 
(In STOP mode)
4
Select an MP3/WMA   le ( /). MP3/WMA Playback (See next page)
Select a Parent folder ( ).Make changes to the previous 
directory display.
Select a folder ( ).Display  les/folders contained in the 
folder.
Select an JPEG   le ( ). JPEG Playback (See next page)
5
Press ACTION to return to 
the DVD MAIN MENU. 
( Press ACTION  again to 
return to the 
MP3/WMA/JPEG MENU.)
PLAY 
MODE: MP3/WMA Playback JPEG Playback 
- Slide-show -
NORMAL All MP3/WMA  
les are 
selected and played back 
one time only. All JPEG  
les are selected 
and played back one time 
only.
SINGLE 
REPEAT The selected MP3/WMA  
le 
is played back repeatedly. The selected JPEG  
le is 
played back repeatedly.
FOLDER 
REPEAT The MP3/WMA  
les 
contained in the selected 
folder are played back 
repeatedly. However, folders 
below the selected folder are 
not played back. The JPEG  
les contained in 
the selected folder are played 
back repeatedly. 
However, folders below the 
selected folder are not played 
back.
DISC 
REPEAT All MP3/WMA  
les are played 
back repeatedly. All JPEG  
les are played 
back repeatedly.
 PLAY MODE selection
Press    to select items and  SET 
or PLAY    to start.
 MP3/WMA/JPEG MENU SCREEN
Windows Media, and the Windows logo are trademarks, 
or registered trademarks of Microsoft Corporation in the 
United States and/or other countries. WMA is a 
compression format developed by Microsoft Corporation. 
It achieves the same sound quality as MP3 with a   le size 
that is smaller than that of MP3.
Example: If the CD-R/CD-RW 
  le hierarchy is displayed on the
PC as shown in diagram at left,
MP3/WMA/JPEG Menu Screen, 
like the one below is displayed.
  File names are displayed in 
ascending order (1, 2, 3...9, A, B, 
C...Y, Z) in the MP3/WMA/JPEG 
MENU Screen ROOT.
■  File area Operation 
(In STOP mode)
■  Play mode Operation 
(In STOP mode)
Explanation of Icons
MPEG Layer-3 audio decoding technology licensed from 
Fraunhofer IIS and Thomson multimedia.
Press SKIP+ | (next) or 
SKIP- | (previous) to skip a 
  le/folder page (7  les) in the File 
area.
Note 
						

							4545
Advanced Operation
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEARENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
SELECT   
  
SET POWER OPEN/
CLOSEANGLE
PLAY
ZOOM SKIP+ 
|STOP
PAU S E SKIP- 
|
ACTION
MP3/WMA PlaybackJPEG Playback
Press     to select an JPEG  le ( 
).
Press SET or PLAY. Selected  le is  
displayed.
1
2
 
■Next/Previous Search
Press SKIP+ | or SKIP- |
JPEG Playback Screen

Do steps 1~3 on page 44.
Press ACTION to return to the DVD MAIN 
MENU.
3
■ Start Slide-show
Press SLOW/SEARCH   or 
SLOW/SEARCH  . 
(see next page)
■  Enlarging an image
Press ZOOM. (see next page)
■  Rotating an image
Press ANGLE. (see next page)
■  Returned on the MP3/WMA/JPEG MENU
Press STOP. (see previous page)
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00   ROOT                   . .               
  My favorite          CAR1
  TECHNO             CAR2
  POPS                  END_WALTZ  JAZZ                   PICTURES
                              
ROOT
My favorite
CAR1.j pg
CAR2.j pg
END
_WALTZ.mp3
PICTURES
picture1.jpg
SKIP+ |SKIP- |
 

Only the JPEG 
 les in a folder that 
were saved while 
being displayed 
are displayed. You can play JPEG images.
Displayable Image Size: 32x32~7680x7680 pixels
  Some JPEG format may not be played back.
■  Forward/ Reverse Search
    Press SLOW/SEARCH   or 
SLOW/SEARCH   during play.
    Press PLAY to release.
      Search speed, slow at  rst, increases with 
each additional press of the button up to 5 
levels.
■  Forward/ Reverse Track  Skip  
     Press SKIP+ 
| or SKIP- | during play.
     Each press skips a track. 
      If pressed within  rst 3 seconds of playback, 
skips to the previous track. If over 3 seconds, 
returns to top of track. (SKIP- 
| only.)
      Put unit in Stop mode before performing 
folder/ le selection (see step 4 on previous 
page.)
■  Pause
     Press PAUSE during play.
Press PLAY to release.
Press SET or PLAY to start playback.2
3
4
Press OPEN/CLOSE to eject the disc. The MP3 MENU is closed automatically.
Press STOP to stop play.
  Copyright protected  les and  les containing errors 
cannot be played back. The unit skips to the next  le.
Press   
 to select an MP3/WMA  le  
(
   / 
) in STOP mode.
1
Do steps 1~3 on page 44.
Note
Note
SLOW/
SEARCH 
 
SLOW/
SEARCH 
  
						

							46For assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected]
MP3/WMA/JPEG Playback Operation (continued)
■ Still picture
Press PAUSE  (only SLIDE)
■  Forward/Reverse Track  Skip
Press SKIP+
 
| or  SKIP- |. Each press 
skips a   le.
■   Cancel slide show
Press STOP  to return to the MP3/WMA/JPEG 
MENU.
(During JPEG Playback.)
JPEG  
les are displayed automatically (about 
every 3 seconds) as a slide-show.
Image changes every 3 seconds.
JPEG Playback - Slide-show -
Press SLOW/SEARCH   or SLOW/SEARCH  .  1


SLOW/
SEARCH  
SLOW/
SEARCH  
Press ACTION  to return to the DVD MAIN 
MENU.
2
(During JPEG Playback.)You can enlarge speci  c portions of a JPEG 
picture and select the zoom ratio using the ZOOM 
button on the remote during JPEG Playback.
Set Zoom size.
Press ZOOM  repeatedly to change display as 
follows.
Press STOP  to return to the MP3/WMA/JPEG 
MENU.
  You can enlarge the center portion of the image to 
one of 2 magni  cations.
  Operation can be done during Rotation (below).
■  Use the  ,  ,
    and  
 buttons to move the 
position up, down, left and right.
JPEG Playback - Zoom -
JPEG Playback - Rotation -
(During JPEG Playback.)You can rotate a JPEG picture using the ANGLE 
button on the remote during JPEG Playback. (The 
JPEG picture will be rotated 90° clockwise.)
Set rotation.
Press ANGLE  repeatedly to change display 
as below. (During JPEG Playback screen)
Press STOP  to return to the MP3/WMA/JPEG 
MENU.
1st Press
2nd Press
3rd Press
ROOT
My favorite
TECHNO
CAR1.j pg
CAR2.j pg
END
_WALTZ.mp3
PICTURES
picture1.jpg
picture2.jpg
picture3.jpg
picture4.jpg
X 1.0 (ORIGINAL)
3rd press
X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)
1st press2nd press 
Image changes every 3 seconds.
picture 1 picture 2 picture 3 picture 4
picture 3 picture 2 picture 1
  Operation can be done during ZOOM (above).
  The vertical/horizontal ratio of rotated JPEG  images may vary when they are displayed.
  Position cannot be changed on X1.0 ORIGINAL 
images.
If SLOW/SEARCH   is pressed while picture 1 is 
displayed.
If SLOW/SEARCH 
  is pressed while picture 3 is 
displayed. Only the JPEG  
les in a folder that were saved 
while being displayed are displayed.
4th Press
Note
Notes 
						

							4747
Advanced Operation
1
1) Press   
 to select 
“DVD LOCK.”
2) Press SET to set “ON” 
or “OFF.”
DVD Lock Ratings (DVD only)
■ “ON” ➞  DVD Lock is activated.
■ “OFF” ➞  DVD Lock is deactivated.
LEVEL 1: LOCK ALL:
Playback of all DVDs, CDs and Video CDs 
is prohibited. (Use to prohibit play of 
mature theme DVDs not encoded with a 
rating level.)
LEVEL 2:  DVDs expressly for children can be played 
back.
LEVEL 3 to 7:  DVDs for general audiences/children can 
be played back. (DVDs with mature 
content are prohibited.)
LEVEL 8:  NO LIMIT: (Factory preset)
All DVDs can be played back.
You can prevent playback of DVDs with a speci c rating level which may be unsuitable for children.  Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback 
will be prohibited.

After DVD Lock is set and a blocked DVD 
is played, this message will appear. The 
message may differ depending on the 
disc.
To continue viewing a blocked 
program for now,
Press 
  
 to select “YES” and SET. 
Then, enter your 4-digit secret code. 
When “NO” is selected, blocked programs 
cannot be viewed.
  Ratings which are highlighted in Green will be blocked; those 
not highlighted (white letters) will not be blocked.
Perform DVD Lock setting in TV mode. 
Enter your secret code to display LOCK menu.
(Perform “Enter Secret Code” steps on page 30.)
US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET   END       : ACT I ON   
           LOCK    
 NEXT   PAGE
SELECT : 
SET : SET END : D I SPLAY,
YOUR  SELECT I ON  EXCEEDS  THE
PLAYER  S  RAT I NG  LIMIT.
DO  YOU  WANT  TO  CHANGE  THE
LIMIT?
YES
NO
Discs not encoded with a rating level will play even if the jacket states it is for mature audiences. 
For these discs, the DVD Lock Ratings will not work.
Caution
2
1) Press   
 to select 
“CHANGE SETTINGS.”
2) Press SET to display 
screen.US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET  END       : ACT I ON   
           LOCK    
 NEXT   PAGE
3
1) Press    
  
 to select 
rating level.
2) Press SET to select 
“LOCKED” or 
“UNLOCKED.”
   LOCK  ALL  SELECT :                   SET : SETEND       : ACT I ON   
1
2345 
6
7      
8     
UNLOCKED
4Press ACTION three times to exit.
To change DVD LOCK settings 
After entering your secret code in 
step 3 on page 30, select “OFF” to 
deactivate DVD Lock or change 
the rating level. 
DVD Lock Feature
*Important:If a remote control button does not work when 
pressed, press the FM/TV, DVD button on the 
remote and try the button again.
TITLE MENUDISPLAY ADD/DLT
PAUSE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
SUB TITLEANGLE
ZOOM AUDIOCLEAR
ENTER
ACTION RETURN
S E T
ACTION

PROGRAM  RATING  EXCEEDED
SELECT
SET 
						

							48For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DISC LANGUAGES (DVD only)
To select and set the language of the audio soundtrack, 
subtitles, or title/DVD menus for all discs to be played.
“AUDIO” selectionsTo select the audio soundtrack language.
(Factory preset: English)
English/Spanish/French/Japanese
Original: Original disc language
OTHER 
✱✱✱✱: Other language selection*1
“SUBTITLE” selectionsTo select the subtitle language.
(Factory preset: AUTO)
AUTO:Same language selected for “AUDIO” 
              If language set for “AUDIO” is 
used in playback, subtitles will not 
appear. 
              If another language is used during 
playback, the subtitles will appear 
in the language selected at “AUDIO” 
setup.
English/Spanish/French/Japanese
OTHER 
✱✱✱✱: Other language selection*1
“MENUS” selections(Factory preset: English)
To select the language used in title menus or 
DVD menus.
English/Spanish/French/JapaneseOTHER 
✱✱✱✱: Other language selection*1
To enter OTHER ✱✱✱✱ code number,
Press NUMBER keys (Please refer to 
language codes on page 51).
To make corrections, press 
   repeatedly to 
delete language code number, and correct.
1
3
Once initial settings are done, they remain 
in memory (even after the power is off) until 
changed. This means the unit will always 
operate under the same conditions (especially 
DVDs) each time.
DISC LANGUAGES (See below.)Any languages offered on the disc can be set. If a 
language not offered is set, the original disc language 
will be selected.
AUDIO OUTPUT (See page 49.)You can set the audio output that comes from the 
digital audio output terminal.
STILL MODE (See page 50.)To select “FIELD” or “FRAME” to prevent jitter or to 
make small text or  ne patterns clearly visible in a still 
picture. When “AUTO” is set, “FIELD” or “FRAME” is 
selected automatically.
TV MODE (See page 50.)To select whether the video material for a wide-screen 
will be played back in Pan & Scan style or in Letterbox 
style.
4
1) Press  to 
select “DISC 
LANGUAGES.”
2) Press SET to 
display screen. Press ACTION* in Stop mode to display 
MAIN MENU.
1) Press     to 
select an item.
2) Press SET to set.
2
1) Press    
  
 to 
select “DVD.”
2) Press SET to 
display screen. 
1) Press     to 
select an item.
2) Press SET 
repeatedly for 
desired language. 
(Please refer right.)
5
6
Press ACTION to redisplay DVD MAIN 
MENU and go to step 3 to setup another item. 
Or, press ACTION three times to exit.
*1If the selected language is not offered, the 
original disc language is selected.  
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
Settings for DVD Operation
D I SC  LANGUAGES
SELECT :  
SET : SET
END : ACT I ONAUDIO: EnglishSUBT I TLE : AUTO
MENUS : English
  Unit is in TV mode, press FM/TV.
 Check List 
						

							4949
Advanced Operation
*Important:  If a remote control button does not work when pressed, press the FM/TV, DVD button 
on the remote and try the button again.
 Make settings according to ampli er 
connected to optical audio output as shown 
in above table.
*1  When connecting an ampli er (with an 
optical digital input connector) which 
does not contain the Dolby Digital or 
dts decoder, be sure to select “PCM.”  
If “Bitstream” is selected, starting DVD 
play may cause such a high level of noise 
as to be harmful to your ears and damage 
the speakers.
*2  When a dts decoder is connected, please 
select “Bitstream” in “dts.” If “PCM” is 
selected, there will be stereo sound.
AUDIO OUTPUT
Select the digital output to be output from the optical 
digital audio output connector of the unit.
Do steps 1 and 2 on page 48.
■  “LPCM (DVD)” selections
OFF:  Linear PCM of less than 48 kHz/16 bit 
is output. When playing DVDs recorded 
in linear PCM of over 48 kHz/20 bit, no 
digital audio is output. (Factory preset)
PCM:   When playing DVDs recorded in 
linear PCM of 48 kHz/20 bit/24 bit or 
more, digital audio converted to 44.1 
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted 
to48 kHz/16 bit or below for copyright 
protection.)
■  “Dolby Digital” selections
Bitstream:  Dolby Digital bitstream (1ch-5.1ch) is 
output. (Factory preset)
PCM:  When you have connected a ampli er 
that doesn’t have a built-in Dolby Digital 
decoder.
■ “dts” selections
Bitstream:  dts bitstream is output. (Factory preset)
PCM:  When you have connected a ampli er 
that doesn’t have a built-in dts decoder.
■  “DRC (Dynamic Range Compression)” 
selections
OFF:  Normal audio range is selected. (Factory 
preset)
ON:  For dynamic sound even at low volume, 
this is useful for late-night listening. 
[Dolby Digital DVDs only].
1) Press     to 
select an item.
2)  Press SET  
repeatedly for 
output. (See 
below.)
1) Press   to 
select “AUDIO 
OUTPUT.”
2) Press SET to 
display screen. 
1
3 2
4
Press ACTION to redisplay DVD MAIN MENU 
and go to step 2 to setup another item. Or, 
press ACTION three times to exit.
AUD I O  OUTPUT
SELECT :  
SET : SET
END : ACT I ONLPCM(DVD) : OFFDolby  Digital : Bitstream
dts : Bitstream
DRC : OFF
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
Type of 
ampli er 
to be 
connectedRecommended setting
LPCM
(DVD)Dolby
Digitaldts
No ampli er 
is connected
AV ampli er 
without Dolby 
Digital/dts 
decoder
PCM PCM*1PCM*1
AV ampli er 
including 
Dolby Digital 
decoder
PCMBitstreamPCM
AV ampli er 
including 
Dolby 
Digital/dts 
decoder 
PCMBitstream Bitstream*2
TITLE MENUDISPLAY ADD/DLT
PAUSE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
SUB TITLEANGLE
ZOOM AUDIOCLEAR
ENTER
ACTION RETURN
S E T
ACTION
SELECT
SET 
						

							50For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
STILL MODE
1
1) Press    * to select 
“STILL MODE.”
2) Press SET repeatedly 
for mode. (See below)
2
Do steps 1 and 2 on page 48.
AUTO:    “FIELD” (Field still) or “FRAME” (Frame still) 
is automatically selected during the still mode. 
(Factory preset)
FIELD:    “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared 
with “AUTO” on some discs.
FRAME: “FRAME” (Frame still) is always selected. 
Some texts and  ne patterns will be seen clearly 
when compared with “AUTO” on some discs.
Selecting TV MODE 
a
1) Press     to select “TV 
MODE.”
2) Press SET repeatedly 
for mode. (See below.)
b
Do steps 1 and 2 on page 48.
4:3 Pan & Scan : Widescreen video data is played in Pan 
& Scan style (left and right of screen is 
trimmed.)
                               Video data not formatted in Pan & 
Scan will play in letterbox style.
4:3 Letterbox :     Widescreen video data is played in 
Letterbox style (top and bottom of 
screen has black margin).
Set the screen display style for widescreen video material 
playback.
4:3 Pan & Scan (Factory preset)
4:3 Letterbox
Set to reduce jitter in a displayed still picture or a motion 
picture.
3
Press ACTION twice to exit this mode.
Press ACTION twice to exit this mode.c
Example
(Factory preset)
*Important:
    If a remote control button does not 
work when pressed, press the DVD 
button on the remote and try the 
button again.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 
4:3 Pan & Scan
Settings for DVD Operation (continued)
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
ACTION
SELECT
SET