Panasonic Tv Dvd Combination Pv 20d53 Operating Instructions

1111
Initial Setup
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE 
(Cable TV) System Installers at ten tion to Article 
820-40 of the NEC that pro vides guide lines for 
proper grounding and, in par tic u lar, speci es 
that the cable ground shall be con nect ed to the 
ground ing system of the build ing, as close to 
the point of cable entry as practical.
                                   
  
   
        
        
THU
SET          :  SET    SELECT  :...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Reset Language, Channels, Clock,     
3)Press   
 to select 
“MANUAL,” then 
press SET.
(For Auto Clock Set, 
select “AUTO CLOCK 
SET,” and press SET.)
3) Press   
 to select 
“ANTENNA,” then 
press SET to set 
your antenna system
 (“TV” or “CABLE”).
4) Press 
  
 to select 
“AUTO SET,” then 
press SET.
  After Channel Auto Set is 
 nished, Clock Auto Set will be 
performed.
(If clock is set...

1313
Initial Setup
     Time Zone Adjust
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : 0
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : +1
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
4)Press   
 and 
press SET to 
select and set the 
month,...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected]
Enjoy the powerful movie theater and hall-like sound available with mult\
iple channel audio found on DVDs 
by connecting an ampli er and speakers. There are two types of connection, digital and analog.
Connect an ampli er to enjoy high-quality stereo 
sound with sampling frequencies of 96 kHz.
■  Analog  connection
Connect an ampli  er with Dolby Digital and 
DTS decoders to enjoy surround sound....

1515
Initial SetupIMPORTANT NOTE:Caution for optical digital audio 
output connector:
  When connecting an ampli er (with an Optical 
digital input connector) which does not contain 
the Dolby Digital or dts decoder, be sure to 
select “
PCM ” at “Dolby Digital” and “ PCM ” at 
“dts” of the Settings for DVD Operation “AUDIO 
OUTPUT” (see page 47). Otherwise, any 
attempt to play DVDs may cause such a high 
level of noise that it may be harmful to your 
ears and damage your speakers.
  When a dts...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
*1Interactive DVD...
May include multiple camera angles, stories, etc.
*
2Video CD with playback control...
Particular scenes or information can be 
interactively selected from a menu that appears 
on the screen.
Operation using unit buttons
Basic DVD Operation
NUMBER
keys POWEROPEN /
CLOSEDVD
  10
TITLE
MENU
PLAY
SEARCH /
SLOW 
 
RETURNSKIP+ 
 
SEARCH 
/SLOW
 
STOP
PAU S E SKIP- 
Press PLAY.
Insert...

1717
DVD Operation
  Please read the disc jacket for operation information.
  If a single sided disc is placed in upside down, “THIS 
TYPE OF DISC CANNOT BE PLAYED. PLEASE 
INSERT A DIFFERENT DISC” is displayed.
  Remove disc and press unit POWER off when not in 
use.
  Disc continues to rotate with menu displayed even 
after play is done. Press STOP to clear menu display 
when  nished with menu.
■  Forward/Reverse rapid scene search 
     ➞ Press SEARCH/SLOW   or 
SEARCH/SLOW  during play.
    
➞...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
TV Operation
1
Press POWER* on the remote or unit.
■ Using the 100 key
When selecting CABLE channels 100 to 125 with 
the NUMBER keys,  rst press the 100 key, and 
then enter the remaining two digits.
■ Rapid Tune
Press R-TUNE to display the last channel you 
were watching.
■ Audio Mute
Press MUTE to...

1919
TV Operation
MTS Broadcast/TV Stereo System
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen 
displays. The signal being received is indicated with an “   ” 
mark while the selected audio mode is indicated with an arrow. 
To change the audio mode for these broadcasts, see the “Audio 
Mode for TV Viewing” section below.
Press DISPLAY  to display the broadcast signal being 
received.
MTS Stereo and SAP broadcastMulti-channel Television Sound Stereo 
(main...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Closed Caption Mode Feature
1
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes 
useful information from TV stations available to everyone.
Press ACTION* to display MAIN MENU.Closed Caption Mode Selections 
Caption Mode: CAP C1...