Panasonic Tv Dvd Combination Pv 20d52 Operating Instructions

11
Initial Setup
*Important:If a remote control button does not work when pressed, press the  FM/TV button on the
remote  and try the button again.
Note to CABLE System InstallerThis reminder is provided to call the
CABLE (Cable TV) System Installers
attention to Article 820-40 of the NEC
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be
connected to the grounding system
of the building, as close to the point
of cable entry as practical.
Unit auto...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
4)Press  and press SET
to select and set the month,
date, year, time, and DST
(Daylight Saving Time).
To Make Corrections,
repeatedly press   to
move to error, then correct.
5)Press ACTION twice to start
the clock and exit this mode.
Reset Language, Channels, Clock,   Time 
3)Press  to select
“MANUAL,” then press SET.
(For Auto Clock Set, select “AUTO
CLOCK SET,” and press SET.)
3) Press  to select...

13
Initial Setup
3)Press  to select
“TIME ZONE ADJUST”
and press 
 or  to
subtract or add hour(s)
as necessary.
4)Press ACTION
twice to exit.
“TIME ZONE ADJUST”
returns to “0” if clock is set
manually.
(Only when Auto Clock is set.)
Time Zone Adjust
1)Press   to
select “CLOCK.”
2)Press SET.
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : 0
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : +1
SELECT :          SET...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Audio Connections
Amplifier
Unit
SpeakerSpeaker
AUDIO OUT
     R     L
R      L
AUDIO IN
Notes on audio output from the optical digital
audio output connector
Enjoying digital audio output from the
digital audio output connector
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See
page 47.)
*2 Sound having 96 kHz sampling is converted into 48
kHz sampling...

15
Initial Setup
Unit
Optical digital audio
cable (optional)
Dolby Digital Decoder
dts processing (optional)
Amplifier
Centre speaker
Front
SpeakerFront
Speaker
Subwoofer
Surround
speakerSurround
speaker

Unit 
➛ ➛➛ ➛
➛ Dolby Digital Decoder 
➛ ➛➛ ➛
➛ Amplifier 
➛ ➛➛ ➛
➛ Speaker
or
Unit 
➛ ➛➛ ➛
➛ dts (digital theater systems) Decoder 
➛ ➛➛ ➛
➛ Amplifier 
➛ ➛➛ ➛
➛ Speaker
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts
bitstream is output from the unit Optical digital...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
4
Press   or
number key(s) (see
below) to select title
and press SET to
play.
Basic DVD Operation
Ready Checklist
All connections are made.
Your unit is plugged in.
If unit is connected to an audio amplifier,
turn the stereo system’s power on.1
Press POWER* on the remote or unit.
Insert a disc.
If a disc is already inserted, go to step 3.
(Depending on the disc, playback may start
automatically.)
1)Press...

17
DVD Operation
Please read the disc jacket for operation
information.
If a single sided disc is placed in upside down,
“PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON
DISC” is displayed.
Remove disc and press unit POWER off when
not in use.
Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.

Forward/Reverse rapid scene
search
➛ ➛➛ ➛
➛Press SLOW  or SLOW 
during play.
➛ ➛➛ ➛
➛Press PLAY to release.
Starting...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
TV Operation
1Press POWER* on the remote or unit.

Using the 100 key
When selecting CABLE channels 100 to 125
with the number keys, first press the 100 key,
and then enter the remaining two digits.

Rapid Tune
Press R-TUNE to display the last channel you
were watching.

Audio Mute
Press MUTE to instantly mute the sound.
Press again to restore the previous sound level.

Phones
Connect an earphone (not...

19
TV Operation
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an “ 
 ” mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the “Select Audio Mode for TV Viewing”
section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Closed Caption Mode Feature
1
Closed Caption System
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs,
but also makes useful information from TV stations available to everyone.
Press ACTION*
to display MAIN MENU.Closed Caption Mode SelectionsCaption Mode: CAP C1 or C2
A narration of selected TV programs
is displayed.
Check TV program listings for...