Panasonic Th 65pf10rk Operating Instructions
Have a look at the manual Panasonic Th 65pf10rk Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Set up TIMER POWER OFF Function POWER OFF Time POWER ON Time POWER ON FunctionOff 0:00 Off 0:00 PRESENT TIME 99:99 Set up TIMER POWER OFF Function POWER OFF Time POWER ON Time POWER ON FunctionOff 0:00 Off 0:00 PRESENT TIME 99:99 31 PRESENT TIME Setup / Set up TIMER Set up TIMER Press to select POWER ON Time / POWER OFF Time. Press to setup POWER ON Time / POWER OFF Time. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON Time / POWER OFF Time 1 minute. • Pressing “ ” or “ ” button continuously changes POWER ON Time / POWER OFF Time by 15 minutes. Press to select POWER ON Function/POWER OFF Function. Press to select On. Press twice to exit from Setup. 1 2 3 Note: Timer function will not work unless “PRESENT TIME” is set. Display the Set up TIMER screen.
2/2 Setup Screensaver MULTI DISPLAY Setup Setup TIMER Portrait Setup PRESENT TIME Setup Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll On 6:15 12:30 High Off Off PRESENT TIME 99:99 32 Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. Reversal / Scroll selection 2 3 1 4 Press to display the Setup menu. Press to select Screensaver. Press to display Screensaver screen. Press to select Function. Press to select the desired function. White bar scroll Image Reversal White bar scroll : The white bar will scroll from left to right. Image Reversal : Negative image will be displayed on the screen. Mode selection Start setting 5 When the Mode is set to On, press to select Start. Press to start Screensaver. The menu screen will disappear and the Screensaver will be activated. To stop the Screensaver under On, press the R button or any buttons on the main unit. Note: When the display is turned off, the Scrensaver will be deactivated. Press to select Mode. Press to select each mode items. Off Interval : Operates when Periodic Time and Operating Time are setup and those times arrive. Time Designation : Operates when Start Time and Finish Time are setup and those times arrive. On : Operates when Start is selected and the ACTION ( ) button is pressed.
Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Operating Time Periodic TimeWhite bar scroll Interval 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Time Designation 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Time Designation 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Operating Time Periodic TimeWhite bar scroll Interval 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Time Designation 0:00 0:00 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Operating Time Periodic TimeWhite bar scroll Interval 0:00 0:00 High Off Off PRESENT TIME 99:99 2/2 Setup Screensaver MULTI DISPLAY Setup Setup TIMER Portrait Setup PRESENT TIME Setup Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start TimeWhite bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 33 Screensaver (For preventing image retention) Setup of Screensaver Time After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.) Press to select Start Time / Finish Time (When Time Designation is selected). Press to select Periodic Time / Operating Time (When Interval is selected). Press to setup. button: Forward button: Back Note: Timer function will not work unless “PRESENT TIME” is set. Notes: • Pressing “ ” or “ ” button once changes the Time 1 minute. [However, switching occurs every 15 minutes when Periodic Time is selected.] • Pressing “ ” or “ ” button continuously changes the Time by 15 minutes. Reduces screen image retention These functions prevent the occurrence of an “image retention” on the display when turned ON. Wobbling: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image. On1: Shifts the image every 30 seconds. On2: Shifts the image at a dot level pitch depending on screen-detection. Peak limit: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 52) Press to select “Screensaver”. Press to display Screensaver menu. Press to select “Wobbling” or “Peak limit”. Press to select “On1”, “On2” or “Off” (Wobbling). “On” or “Off” (Peak limit).2 3 1 Press to display the Setup menu.
Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start Time White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 34Screensaver (For preventing image retention) Side Panel Adjustment 1 Press to select Side panel. Press to select Off, Low, Mid, High. Press to exit from Screensaver. 2 Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side panels either side of the display fi eld. To reduce the risk of such an image retention, illuminate the side panels. Display the Screensaver screen. (Refer to the previous page, operation guide steps 1 and 2) Notes: • To reduce the occurrence of image retention, set the Side panel to High. • The side panels may fl ash (alternate black / white) depending on the picture being shown on the screen. Using Cinema mode will reduce such fl ashing.side panel 4:3 Screen Display image retention Picture out Picture Picture and PictureNon picture area This function may be applicable to the non-picture area. Off Mid HighLow
1/2 PC Off Standby saveOff Power management Off Auto power off Off OSD Language English ( UK) Component/RGB-in select RGB Input labelSignal Power save Setup 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK) Component/RGB-in select RGB Input label Signal Power save Setup 35 Reduces power consumption Press to select “Power save” “Standby save” “Power management” “Auto power off”. Press to select “On” or “Off”. On Off Press to exit from Setup. • Power save: When this function is turned On, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • Standby save: When this function is turned On, power consumption of the microcomputer is reduced during power supply standby (see page 13, 16-17), so standby power of the set is reduced. • Power management: The unit power supply is turned On or Off depending on whether or not there is a signal during PC input mode. This function is enabled when it is turned On. (Only during input from PC (Mini D-sub) terminal) • Auto power off: Equipment power supply is turned Off when there is no signal. When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop. This function is effective for input signals except input from PC (Mini D-sub) terminal. Press to select Input label. Press to change the Input label. Customizing the Input labels This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before customizing the Input labels. (see page 15, 17) Note: While selecting an Input signal through Optional Terminal Board connected to Slot1, Slot2 and Slot3, the Input label will depend on each Optional Terminal Board. Input labels for Slot1, Slot2, Slot3 and Mini D-sub: [Slot1 Input] INPUT1 / VIDEO1 / COMPONENT1 / RGB1 / DIGITAL1 / PC1 / DVD1 / CATV1 / VCR1 / STB1 [Slot2 Input] INPUT2 / VIDEO2 / COMPONENT2 / RGB2 / DIGITAL2 / PC2 / DVD2 / CATV2 / VCR2 / STB2 [Slot3 Input] INPUT3 / VIDEO3 / COMPONENT3 / RGB3 / PC3 / DVD3 / CATV3 / VCR3 / STB3 [PC (Mini D-sub) input] PC / COMPONENT / RGB / DVD / STBNote: “Power management” and “Auto power off” are effective during normal viewing (one picture screen) only. 1 2 3 Addition sign“A” “B” Selected InputComposite S VIDEO When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending on the input selected (see below).
2/2Setup Screensaver MULTI DISPLAY Setup Setup TIMER Portrait Setup PRESENT TIME Setup × 2 MULTI DISPLAY Setup Horizontal Scale Off A1 Off AI-synchronization Vertical Scale LocationOff Seam hides video× 2 MULTI DISPLAY Setup 36 Press to display the Setup menu. Press to select the MULTI DISPLAY Setup. Press to display the “MULTI DISPLAY Setup” menu. Press to select the MULTI DISPLAY Setup. Press to select “On” or “Off”. How to Setup MULTI DISPLAY 1 2 3 Setup for MULTI DISPLAY By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. (Example) (see page 37 for more displays lineups.)group of 16 (4 × 4) group of 4 (2 × 2) group of 9 (3 × 3) group of 25 (5 × 5) Note: If you set MULTI DISPLAY Setup to On, Portrait Setup will be unavailable.
Off AI-synchronization× 2 Horizontal Scale Off Off A1 Location Vertical Scale Seam hides video × 2 MULTI DISPLAY Setup MULTI DISPLAY Setup Off AI-synchronization× 2 Horizontal Scale Off Off A1 Location Vertical Scale Seam hides video × 2 MULTI DISPLAY Setup MULTI DISPLAY Setup Off AI-synchronization× 2 MULTI DISPLAY Setup Horizontal Scale Off Off A1 Location Vertical Scale Seam hides video × 2 MULTI DISPLAY Setup Off AI-synchronization× 2 Horizontal Scale Off Off A1 Location Vertical Scale Seam hides video × 2 MULTI DISPLAY Setup MULTI DISPLAY Setup A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1 D2 D3 D4 D5 E1 E2 E3 E4 E5 37 How to set the display location number for each Plasma Display Display Number locations for each arrangement. (Examples) 4 7 ( 2 × 1) ( 2 × 3 ) ( 4 × 4 ) Press to select Horizontal Scale. Press to select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”. Press to select Location. Press to select the required arrangement number. (A1-E5 : Refer to the following) 5Press to select Vertical Scale. Press to select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”. 6Press to select Seam hides video. Press to select “Off” or “On”. ( 4 × 2 ) To hide joints between displays. Suitable for moving image display.To show joints between displays.Suitable for still image display. On Off ( 5 × 5 ) Setup for MULTI DISPLAY
MULTI DISPLAY SetupOff Off MULTI DISPLAY Setup Horizontal Scale Vertical Scale Seam hides video A1 Location× 2 × 2 AI-synchronizationOff 38Setup for MULTI DISPLAY You can set the remote control ID when you want to use this remote control on one of several different displays. 1 2 3Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 should be set up quickly. • Adjustable ID number range is 0 - 99. • If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote control. ID Cancellation Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.) Notes: • Set the Remote ID “On” to operate the ID remote control. If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. (see page 47) • The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 47). ID remote control button operation The operation is the same as normal remote control except for the button. 8 Press to select AI-synchronization. Press to select “Off” , “On”. Adjusts brightness of displays when using MULTI DISPLAY. The brightness depends on each display’s setting.Equalize the brightness of all the displays. Off On Note: If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial values. Picture menu: Colour, Hue Press twice to exit from Setup. 9 AI-synchronization ID Remote Control Function
2/2 Set up Screensaver MULTI DISPLAY Setup Portrait Setup Set up TIMER PRESENT TIME Setup Off Portrait Setup Seam hides videoOff 1 Off AI-synchronization Viewing Area Location16 : 9 Portrait Setup Off Portrait Setup Seam hides videoOff 1 Off AI-synchronization Viewing Area Location16 : 9 Portrait Setup 39 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. Set up for Portrait Press to display the Setup menu. Press to select the Portrait Setup. Press to display the “Portrait Setup” menu. Press to select the Portrait Setup. Press to select “On” or “Off”. Note: If you set Portrait Setup to On, MULTI DISPLAY Setup will be unavailable. Press to select Seam hides video. Press to select “Off” , “On”. How to setup Portrait 1 2 3 4 To hide joints between displays. Suitable for moving image display.To show joints between displays.Suitable for still image display. On Off Note: When using the Portrait function with displays set vertically, “V.Installation” in Options menu has to be set to “On” (see page 48). (Example)
Off Portrait Setup Seam hides videoOff 1 Off AI-synchronization Viewing Area Location16 : 9 Portrait Setup Off Portrait Setup Seam hides videoOff 1 Off AI-synchronization Viewing Area Location16 : 9 Portrait Setup 40Set up for Portrait Press twice to exit from Setup.7 Press to select AI-synchronization. Press to select “Off” , “On”. Adjust to equalize the brightness of the 3 displays when using Portrait setting. The brightness depends on each display’s setting.Equalize the brightness of all the displays. Off On Note: If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial values. Picture menu: Colour, Hue 6AI-synchronization Viewing Area / Location Press to select Viewing Area or Location. Press to select each functions. Notes: • When the input signal is 16:9, Viewing Area is fi xed to “16:9”. • When “Viewing Area” is “16:9”, the aspect mode is set to “16:9”. 5 Viewing Area: Set a mode of image division for Portrait function. Location: Set a location of image to be displayed for Portrait function. When Portrait Setup is “On”: Display the image of the selected location.When Portrait Setup is “Off”: Represent an area of the selected Location at a normal brightness and darken the rest of it. Location setting Viewing Area and Location The mode of image division and the Location by setting of Viewing Area is as follows. Location 1 Location 2 Location 3 Location 1 Location 2 Location 3 Viewing Area : 4:3Suitable to display 16:9 images. 4:3 images extend transversely. Both right and left sides of the image are cut by 48 dots. Viewing Area : 16:9 4:3 images are displayed without changing aspect ratio. Although the images of each Location overlap, you can adjust Pos. / Size to display the image normally. (see page 21) Undisplayed area (48 dots)