Panasonic Th 50pf30 Operating Instructions

							41
Reduces screen image retention
CUSTOM SETTINGS
Set the individual “Image Retention Reduction” menu.
1Select “CUSTOM SETTINGS”.
EXPRESS SETTINGS
CUSTOM SETTINGS
RESET
EXTENDED LIFE SETTINGS1 select
2 access
2To set each menu to the recommended setting:
Select “RECOMMENDED SETTINGS”.
PICTURE MENU
PICTURE
EXTENDED LIFE SETTINGS
DYNAMIC
SIDE BAR ADJUST
NANODRIFT SAVER
LOCK SETTINGSPEAK LIMIT
BRIGHT
MID
UNLOCK
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
OFF
30
RECOMMENDED SETTINGS
1 select
2 set
Each menu will be set as same as 
the “EXPRESS SETTINGS”.
3Set each menu.
PICTURE MENU
PICTURE
EXTENDED LIFE SETTINGS
DYNAMIC
SIDE BAR ADJUST
NANODRIFT SAVER
LOCK SETTINGSPEAK LIMIT
BRIGHT
MID
UNLOCK
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
OFF
30
RECOMMENDED SETTINGS
1 select
2 adjust
4To lock each menu setting:
Set the “LOCK  SETTINGS” to “LOCK”.
PICTURE MENU
PICTURE
EXTENDED LIFE SETTINGS
DYNAMIC
SIDE BAR ADJUST
NANODRIFT SAVER
LOCK SETTINGSPEAK LIMIT
BRIGHT
MID
LOCK
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
OFF
30
RECOMMENDED SETTINGS
1 select
2 adjust
When a menu is locked, it is grayed out and cannot be set.
“PICTURE MENU” and “PICTURE” will no longer 
be able to set in the “PICTURE” menu, and they are 
labeled with icon to indicate their locked status. Also, 
“NORMALIZE”, “MEMORY SAVE” and “MEMORY 
LOAD” are not available.
0
0
0
5
PICTURE
NORMALNORMALIZEDYNAMIC
BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE
TINT
ADVANCED SETTINGS
MEMORY SAVECOLOR TEMPNORMAL
MEMORY LOAD
MEMORY EDIT
EXTENDED LIFE SETTINGS
30
5Select the input to apply the settings.
PICTURE MENU
PICTURE
EXTENDED LIFE SETTINGS
DYNAMIC
SIDE BAR ADJUST
NANODRIFT SAVER
LOCK SETTINGSPEAK LIMIT
BRIGHT
MID
LOCK
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
OFF
30
RECOMMENDED SETTINGS
1 select
2 set
6Select “YES”.
APPLY TO CURRENT INPUT
NO YES
EXTENDED LIFE SETTINGS1 select
2 set
RESET
Reset the “Image Retention Reduction” menu to the factory settings. Each menu will be unlocked.
1Select “RESET”.
EXPRESS SETTINGS
CUSTOM SETTINGS
RESET
EXTENDED LIFE SETTINGS1 select
2 access
2Select the input to reset the settings.
RESET CURRENT INPUT
RESET ALL  INPUTS
EXTENDED LIFE SETTINGS1 select
2 set
3Select “YES”.
RESET CURRENT INPUT
NO YES
EXTENDED LIFE SETTINGS1 select
2 set
 
						

							1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTONDVI-D POWER MANAGEMENTOFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVE
3D SETTINGS
NO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
42
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“PC POWER MANAGEMENT”
“DVI-D POWER MANAGEMENT”
“NO SIGNAL POWER OFF”
“NO ACTIVITY POWER OFF”.
Press to select “ON (ENABLE)” or “OFF (DISABLE)”.
On (ENABLE) 
 Off (DISABLE)
Press to exit from SET UP. • POWER SAVE:  When this function is turned ON, luminous level of the Plasma Display is suppressed, so 
power consumption is reduced.
• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during 
power supply standby (see page 16, 19, 20), so standby power of the set is reduced.
• 
PC POWER MANAGEMENT:  When this function is set to ON, it operates under the following conditions to turn the power 
on or off automatically.
  When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal input:
         Power is turned off (standby); the power indicator lights up orange.
  When pictures (HD/VD sync signals) are subsequently detected:
         Power is turned on; the power indicator lights up green.
 Notes:
  • This function operates only during PC signal input.
 •  This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT” 
is set to “RGB” and during normal viewing.
•  DVI-D POWER MANAGEMENT:  When this function is set to ON, it operates under the following conditions to turn the 
power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:
 Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
 Power is turned on; the power indicator lights up green.
Notes:
•  This function operates only during DVI signal input.
 •  This function is invalid during input from DVI-D Terminal Board (TY-FB11DD) and Dual 
DVI-D Terminal Board for 3D (TY-FB30DD3D).
 •  Depending on the type of terminal board equipped, this function may be invalid.
• NO SIGNAL POWER OFF:  Equipment power supply is turned OFF when there is no signal.
  When this is set to “ENABLE”, the power supply of the unit goes Off 10 minutes after the 
input signals stop. 
• 
NO ACTIVITY POWER OFF:  When this function is set to “ENABLE”, the power is turned off (standby) automatically when 
there is no operation of the Plasma Display for 4 hours.
  Starting from 3 minutes before the turn off, the remaining time will be displayed. 
  When the power is turned off due to this function, a message “LAST TURN OFF DUE TO 
’NO ACTIVITY POWER OFF’.” is displayed next time the power is turned on.
Note:
  During the screensaver is running, this function is disabled.
1
2
3
NO ACTIVITY POWER OFF
3MINPRESS ANY  KEY TO ABORT.
 
						

							43
1/2
SIGNALSCREEN SAVEREXTENDED LIFE SETTINGSINPUT LABEL
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTON
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
POWER SAVE
SET UP
DVI-D POWER MANAGEMENTOFFNO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
3D SETTINGSPress to display the SETUP menu.
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
Press to select image input.
Press to change input label.1
2
3
SLOT INPUT
VIDEO
INPUT LABEL
COMPONENTHDMIDVI
PC
SLOT INPUT
VIDEO
COMPONENT
HDMI
DVI
PC
Customizing the Input labels
This function can change the label of the Input signal to be displayed. (see page 18)
Image input  Input label
[SLOT INPUT]*1  SLOT INPUT / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / 
VCR / STB / (SKIP)
[VIDEO]  VIDEO / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / 
STB / (SKIP)
[COMPONENT]*2  COMPONENT / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / 
VCR / STB / (SKIP)
[HDMI]  HDMI / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / 
STB / (SKIP)
[DVI]  DVI / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / STB / 
(SKIP)
[PC]  PC / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / STB / 
(SKIP)
(SKIP) : The INPUT button press will skip its input.
*1 “SLOT INPUT” is displayed when a Terminal Board is installed.
*2  “COMPONENT” may be displayed as “RGB” depending on the setting of “COMPONENT/RGB-IN SELECT”.
 
(see page 49)
When a Terminal Board with dual input terminals is installed
“SLOT INPUT” is displayed as “SLOT INPUT A” and “SLOT INPUT B” and independent settings are available.
[SLOT INPUT A]  SLOT INPUT A / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (SKIP)
[SLOT INPUT B]  SLOT INPUT B / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (SKIP)
When a Terminal Board with  xed display (such as Tuner Board) is installed
Only  xed display and (SKIP) are available as Input label of “SLOT INPUT”.
[SLOT INPUT]
  xed display / (SKIP)
 
						

							1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTONDVI-D POWER MANAGEMENTOFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVE
3D SETTINGS
NO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
44
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
   Selectable languages
.......(Japanese)  .......(Chinese)  Italiano  Français  Deutsch  English(UK) 
Español 
ENGLISH(US) 
.......(Russian) 
 
Selecting the On-Screen Menu Language
1
2
Sets the fan control, panel drive control, and the display style of on-screen menu for vertical installation.
Press to display the SET UP menu.
Press to select DISPLAY ORIENTATION.
Press to select “LANDSCAPE” or “PORTRAIT”.
Press to exit from adjust mode
1
2
3
Notes:
•  Turn up the power switch for the upward direction when you set Display vertically.
•  When you change this setting, fan control and panel drive control will be switched as the power is turned on next time.LANDSCAPE PORTRAIT
Fan control and panel drive control for 
horizontal installation.Fan control and panel drive control for vertical installation. On-screen 
menu will be rotated 90 degrees counterclockwise to be suitable for 
the setting.
DISPLAY ORIENTATION
2/2 SET UP
MULTI DISPLAY SETUP
SET UP TIMER
NETWORK SETUP
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
PORTRAIT SETUP
 
						

							2/2 SET UP
MULTI DISPLAY SETUP
SET UP TIMER
NETWORK SETUP
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
PORTRAIT SETUP
× 2  MULTI DISPLAY SETUP 
HORIZONTAL SCALE OFF 
A1
OFF
AI-SYNCHRONIZATION VERTICAL SCALE 
LOCATIONOFF
SEAM HIDES VIDEO× 2 
MULTI DISPLAY SETUP 
45
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
Note:
During Multi display, the 3D images are displayed as 2D images.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
group of 16 (4 × 4) group of 4 (2 × 2) group of 9 (3 × 3)
SET UP for MULTI DISPLAY
(Example)
group of 25 (5 × 5)
Press to display the SET UP menu.
1
2
3
Press to select the MULTI DISPLAY SETUP.
Press to select “ON” or “OFF”.
Item Details
MULTI DISPLAY SETUPSelect “ON” or “OFF”.
Note: If you set MULTI DISPLAY SETUP to ON, PORTRAIT SETUP will be unavailable.
HORIZONTAL SCALESelect “× 1”, “× 2”, “× 3”, “× 4”, “× 5”.
VERTICAL SCALESelect “× 1”, “× 2”, “× 3”, “× 4”, “× 5”.
SEAM HIDES VIDEOSelect “ON” or “OFF”.
To hide joints between displays.
Suitable for moving image display.
To show joints between displays.
Suitable for still image display.
ON OFF
LOCATIONSelect the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 ) ( 4 × 4 )( 4 × 2 ) ( 5 × 5 )
A1 A2 A3 A4 A5
B1 B2 B3 B4 B5
C1 C2 C3 C4 C5
D1 D2 D3 D4 D5
E1 E2 E3 E4 E5
 
						

							46
You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636070R
SET UP for MULTI DISPLAY
1
2
3Switch  to  on the right side.
Press the 
 button on the remote control.
Press one of 
 - ,  for the tens digit setting.
Press one of 
 - ,  for the units digit setting. 4
Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
•  If a number button is pressed more than two times, the  rst two numbers become the ID number 
for the remote control.
ID Cancellation
Press  button on remote control. (This has the same effect as pressing the , ,  buttons at the same time.)
Notes:
•  Set the Remote ID “On” to operate the ID remote control.
  If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. 
  (see page 55)
•  The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not 
the same as the ID select number (see page 55).
ID remote control button operation
The operation is the same as normal remote control except for the  button.
ID Remote Control Function
Item Details
AI-SYNCRONIZATIONSelect “OFF” or “ON”.
The brightness depends on each 
display’s setting.Equalize the brightness of all the 
displays.
OFF ON
Notes:
•  If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and 
these settings will be  xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)
•  This function cannot be adjusted during input from VIDEO terminal.
Press to exit from adjust mode.
4
 
						

							47
Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI 
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to select “OFF” , “ON”.
How to setup PORTRAIT
1
2
3
4
To hide joints between displays.
Suitable for moving image display.To show joints between displays.Suitable for still image display.
ON OFF
2/2 SET UP
MULTI DISPLAY SETUP
SET UP TIMER
NETWORK SETUP
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
PORTRAIT SETUP
OFF PORTRAIT SETUP
SEAM HIDES VIDEOOFF 
1
OFF
AI-SYNCHRONIZATION VIEWING AREA
LOCATION16:9
PORTRAIT SETUP
OFF PORTRAIT SETUP
SEAM HIDES VIDEOOFF 
1
OFF
AI-SYNCHRONIZATION VIEWING AREA
LOCATION16:9
PORTRAIT SETUP
Notes:
•  When using the PORTRAIT function with displays set vertically, “DISPLAY ORIENTATION” in SET UP menu has to be 
set to “PORTRAIT” (see page 44).
• Turn up the power switch for the upward direction when you set Display vertically.
• During Portrait display, the 3D images are displayed as 2D images.
 
						

							48
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
•  For HD signal videos, the “VIEWING AREA” is set at “16:9”, 
and cannot be changed. 
  HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p 
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
•  When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
Press to exit from adjust mode.
7 6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”. Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting. 
The brightness depends on 
each display’s setting.Equalize the brightness of 
all the displays.
OFF ONNotes:
•  
If you set AI-SYNCHRONIZATION to ON, the 
following menus will be unavailable and these 
settings will be  xed to the initial values.
PICTURE menu:  COLOR, TINT, INPUT 
LEVEL (ADVANCED 
SETTINGS)
•  This function cannot be adjusted during 
input from VIDEO terminal.
AI-SYNCHRONIZATION
OFF PORTRAIT SETUP
SEAM HIDES VIDEOOFF 
1
OFF
AI-SYNCHRONIZATION VIEWING AREA
LOCATION16:9
PORTRAIT SETUP
OFF PORTRAIT SETUP
SEAM HIDES VIDEOOFF 
1
OFF
AI-SYNCHRONIZATION VIEWING AREA
LOCATION16:9
PORTRAIT SETUP
5
VIEWING AREA: Set a mode of image division for PORTRAIT function.
LOCATION:    Set a location of image to be displayed for PORTRAIT function.
VIEWING AREA / LOCATION
When PORTRAIT SETUP “ON”:
Display the image of the selected LOCATION.When PORTRAIT SETUP is “OFF”:
Represent an area of the selected LOCATION at a normal 
brightness and darken the rest of it. LOCATION setting
VIEWING AREA and LOCATION
The mode of image division and the LOCATION by setting of VIEWING AREA is as follows. 
LOCATION 1 LOCATION 2 LOCATION 3
LOCATION 1 LOCATION 2 LOCATION 3 VIEWING AREA:  4:3Suitable to display FULL images. NORMAL 
(4:3) images extend transversely.
Both right and left sides of the image are 
cut by 48 dots. VIEWING AREA:  16:9
4:3 images are displayed without changing 
aspect ratio. 
Although the images of each LOCATION 
overlap, you can adjust POS./SIZE to display 
the image normally. (see page 26) Undisplayed area (48 dots)
 
						

							1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTONDVI-D POWER MANAGEMENTOFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVENO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
3D SETTINGS
NO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTONDVI-D POWER MANAGEMENTOFF
OSD LANGUAGEENGLISH (
US) YUV/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVE
3D SETTINGS
49
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y,  P
B, PR signals  “COMPONENT”
RGB signals 
 “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN SELECT”.
Press to select the desired mode.
COMPONENT 
 RGB
Press to exit from adjust mode.
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).
1
2
3
YUV / RGB IN SELECT
Select to match the signals from the source connected to the DVI input terminals.
YUV signals  
“YUV”
RGB signals 
 
“RGB”
Press to display the SET UP menu.
Press to select the “YUV / RGB-IN SELECT”.
Press to select the desired mode.
YUV 
 RGB
Press to exit from adjust mode.
Notes:
•  Selection may not be possible, depending on which optional board is installed.
•  Make setting of the selected input terminal (SLOT or DVI-D IN).
1
2
3
 
						

							1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTONDVI-D POWER MANAGEMENTOFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVENO SIGNAL POWER OFFENABLENO ACTIVITY POWER OFFDISABLE
3D SETTINGS
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
OFF
[ 
VIDEO ]
NOISE REDUCTION
OFF
3 : 2 PULLDOWN
SIGNAL
OFF
[ 
Digital ] 
NOISE REDUCTION
OFFH-FREQ.
V- F R E Q .kHz
Hz 63.98
60.02
DOT CLOCK FREQ.MHz 108.0
SIGNAL FORMAT 1280×1024/60i
SIGNAL [ 
COMPONENT ]
XGA MODE
AUTONOISE REDUCTION
OFFH-FREQ.
V- F R E Q .kHz
Hz 63.98
60.02
SIGNAL FORMAT 1280×1024/60i
SYNC
3 : 2 PULLDOWNAUTO
OFF
SYNC
SIGNAL
H-FREQ.
V- F R E Q .kHz
Hz 63.98
60.02
SIGNAL FORMAT 1280×1024/60i
[ 
RGB ]
3 : 2 PULLDOWN
XGA MODE
NOISE REDUCTION
OFF AUTO
OFF
AUTO
• 3D Y/C FILTER (NTSC)
This menu is displayed when BNC Dual Video Terminal 
Board (TY-FB9BD) is installed to the unit.
Set this menu when the moving image looks unnatural 
during Video (S Video) input signal. 
ON 
 OFF
Note:
When ON, this setting only affects NTSC input signals.
• COLOR SYSTEM
 
AUTO SECAM M.NTSCNTSC PA L
Set the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selected 
from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select “AUTO” or “PAL”.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become 
unstable. Should this occur, set the system to match the format of the input signal.
 3:2 PULLDOWN
When “ON”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which 
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to “OFF”.
ON 
 OFF
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during Video (S Video) input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
• XGA MODE
This menu is displayed when the input signal is analog (Component/PC).
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling 
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
AUTO 
 1024×768  1280×768  1366×768
AUTO:  Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS./SIZE” menu as 
necessary. (see page 26)
50
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode. Note: 
“SIGNAL” setup menu displays a different setting condition for each input signal.3
4
SET UP for Input Signals
SIGNAL menu
For VIDEO (S VIDEO) Press to display the SET UP menu.
Press to select the “SIGNAL”.
Press to display the SIGNAL menu.
2 1
For RGB
For COMPONENT
For Digital Press ACTION  (
  ) button