Panasonic Th 42ph9es Operating Instructions

31
Reduces power consumption
Press to select 
“Power save”
“Standby save”
“Power management”
“Auto power off”.
Press to select “On” or “Off”.
On  Off
Press to exit from Setup. • Power save:  When this function is turned On, luminous level of the Plasma Display is suppressed, so 
power consumption is reduced.
• Standby save:   When this function is turned On, power consumption of the microcomputer is reduced 
during power supply standby (see page 12, 14-15), so standby power of the set is reduced.
• Power...

32
Setup for MULTI DISPLAY
By lining up Plasma Displays in groups of 4, 9 or 16 as illustrated below, an enlarged picture may be displayed across 
all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location. 
group of 4 (2 × 2 (F)) group of 9 (3 × 3 (F)) group of 16 (4 × 4 (F))
How to Setup MULTI DISPLAY
Press to select the MULTI DISPLAY Setup.
Press to display the “MULTI DISPLAY Setup” 
menu.
1
2
3
Press to select the MULTI DISPLAY...

33
Setup for MULTI DISPLAY
Press to select Ratio (2nd step).
Press to select “2 × 2”, “2 × 2 F”, “3 × 3”, 
“3 × 3F”, “4 × 4”, “4 × 4F”.
How to set the display location number for each Plasma Display 
4
Press to select Location.
Press to select the required arrangement number. 
(A1-D4 : Refer to the following)
5
MULTI DISPLAY Setup
Location MULTI DISPLAY Setup
RatioOff
2 × 2
A1
MULTI DISPLAY Setup
Location MULTI DISPLAY Setup
RatioOff
2 × 2
A1
Display Number locations for each arrangement
( 2 × 2 (F) ) (...

34
(For TH-42PH9EK/S, TH-50PH9EK/S)
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across 
all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
(Example)
Press to display the Set up menu.
Press to select the MULTI DISPLAY Setup.
Press to display the “MULTI DISPLAY Setup” 
menu.
Press to select the MULTI DISPLAY Setup.
Press to select “On” or “Off”.
How to Setup MULTI...

35
Setup for MULTI DISPLAY
How to set the display location number for each Plasma Display 
Display Number locations for each arrangement.
(Examples)
Press twice to exit from Setup.
4
7
× 2
Horizontal ScaleOff
Off
A1
Location Vertical Scale
Seam hides video× 2 MULTI DISPLAY Setup
MULTI DISPLAY Setup
× 2
Horizontal ScaleOff
Off
A1
Location Vertical Scale
Seam hides video× 2 MULTI DISPLAY Setup
MULTI DISPLAY Setup
( 2 × 1) ( 2 × 3 )( 4 × 4 )
8
Press to select Horizontal Scale.
Press to select “× 1”, “× 2”,...

36
Setup for MULTI DISPLAY
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different TVs.
1
2
3Switch  to  on the right side.
Press the 
 button on the remote control.
Press one of 
 - ,  for the tens digit setting.
Press one of 
 - ,  for the units digit setting. 4
Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
•  If a number button is pressed more than two times, the fi rst two...

37
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the Component / RGB input terminals.
Y,  P
B, PR signals  
“Component”
R, G, B, HD, VD signals  
“RGB”
1
2Press to display the Setup menu.
Press to select the “Component / RGB-in 
select”.
Press to select the desired input signal.
Component  RGB
Press to exit from adjust mode.
3D Y/C Filter – For NTSC AV images
Select “Signal” from the “Setup” menu during AV(S Video) input signal. (“Signal 
[AV]”...

38
Setup for Input Signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal 
[AV]” menu is displayed.)
Press to select the “Colour system” or 
“Panasonic Auto”.
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input 
signals the image may in rare cases become unstable. Should this occur, 
set the system to match the format of the input signal.
Cinema...

39
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Press to exit from adjust mode.
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input 
signal).
Auto:  The H and V sync or synchronized signal are automatically selected. 
If both input, it is selected the H and V sync.
on G:  Uses a synchronized signal on the Video G signal, which is input 
from the G connector.
VBS:  Uses a synchronized signal of Composite Sync input,...

40
Options Adjustments
1
2
3
5Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select your preferred menu.
Press to adjust the menu.
Press to confi rm.
Press to exit from 
Options menu.
4
6
Item Effect Adjustments
Off-timer 
function
EnableDisable
Enable:  Switches the “Off-timer function” “On”
Disable:  Switches the “Off-timer function” “Off”
Note:  When “Disable” is set, the Off-timer is cancelled.
Onscreen 
display
On Off
On:...