Panasonic Th 152ux1 Operating Instructions

							Model No.
TH-152UX1
Operating Instructions
High De nition Plasma Display
Please read these instructions before operating your set 
and retain them for future reference.English
 
						

							ii
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of 
enjoyment from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making 
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of 
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site          http://panasonic.net
 
						

							WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to quali ed service personnel.
The lightning flash with 
arrow-head within a triangle 
is in tend ed to tell the user 
that parts inside the product 
are a risk of electric shock 
to per sons.The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the ap pli ance.
CAUTION 
RISK OF ELECTRIC SHOCK 
DO NOT OPEN 
WARNING  : To prevent damage which may result in  re or shock hazard, do not expose this apparatus to 
rain or mois ture.
    Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. 
    (including on shelves above, etc.)
WARNING : To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to 
quali ed service personnel.
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
ampli ers) that produce heat.
  9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the provided plug does not  t into your outlet, consult an 
electrician for replacement of the obsolete outlet.
  10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 
the point where they exit from the apparatus.
11)  Only use attachments / accessories speci ed by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution when moving the cart / apparatus combination 
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.
15) The installation shall be carried out in accordance with all applicable installation rules.
iii
Important Safety Instructions
 
						

							iv
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
FCC CAUTION: 
To assure continued compliance, follow the attached installation instructions and use only shielded 
interface cables when connecting to computer or peripheral devices. Any changes or modi cations  not 
expressly approved by Panasonic Corp. of North America could void the user's authority to operate this 
device.
FCC Declaration of Conformity
Model No. TH-152UX1
 
Responsible Party:  Panasonic Corporation of North America
      Three Panasonic Way 2F-5, Secaucus, NJ 07094
Contact Source:  Panasonic Solutions Company
      Panasonic Plasma Concierge 1-800-973-4390
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
FCC STATEMENT
 
						

							v
Trademark Credits
•  VGA is a trademark of International Business Machines Corporation.
•  Macintosh is a registered trademark of Apple Inc., USA.
•  SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
 
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. 
•  HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries.
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention 
to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
Important Safety Notice
WARNING
1)  To prevent damage which may result in  re or shock hazard, do not expose this appliance to dripping 
or splashing.
  Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on 
shelves above, etc.)
 No naked  ame sources, such as lighted candles, should be placed on / above the set. 
2)  To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali ed 
service personnel.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic  elds.
Using this appliance near sources of strong electromagnetic  elds or where electrical noise may overlap with the 
input signals could cause the picture to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic  elds.
 
						

							vi
Important Safety Instructions ................................. iii
FCC STATEMENT ..................................................... iv
Important Safety Notice ........................................... v
Safety Precautions ................................................... 1
3D Safety Precautions.
.............................................4
Accessories .............................................................. 6
Accessories Supply ................................................. 6
Remote Control Batteries ........................................ 6
Connections .............................................................. 7
Video equipment connection ................................... 7
Dual Link HD-SDI (4k2k) connection ....................... 8
Single Link DVI-D (4k2k) connection ....................... 9
HDMI connection ................................................... 10
DVI-D IN connection .............................................. 10
PC Input Terminals connection ...............................11
SERIAL Terminals connection ............................... 12
Power On / Off ......................................................... 13
Selecting the input signal ...................................... 15
Basic Controls ........................................................ 16
ASPECT Controls ................................................... 18
Viewing 3D images ................................................. 19
To view the 3D images .......................................... 19
Troubleshooting for 3D Eyewear  .......................... 20
Table of images that can be seen for each 3D 
Picture Format and the source image format ........ 20
On-Screen Menu Displays ..................................... 21
Adjusting Pos. /Size ............................................... 22Picture Adjustments ............................................... 25
Advanced settings ................................................. 26
Colour space adjustment (Colour Gamut) ............. 28
Picture Pro les ....................................................... 30
Saving pro les ....................................................... 31
Loading pro les ..................................................... 32
Editing pro les ....................................................... 33
Setup menu ............................................................. 34
YUV/RGB-in select.................................................34
Power save ............................................................ 34
PC Power management ........................................ 34
Auto power off ....................................................... 34
OSD Language ...................................................... 35
3D Settings ............................................................ 35
SIGNAL menu ....................................................... 36
Screensaver .......................................................... 37
Extended life settings ............................................ 38
Customizing the Input labels ................................. 41
Options Adjustments ............................................. 42
3D Safety Precautions (To hide 3D Safety 
Precautions) .......................................................... 44
Using FUNCTION button ........................................ 44
Troubleshooting ..................................................... 45
List of Aspect Modes ............................................. 46
Applicable Input Signals ........................................ 47
Shipping condition ................................................. 48
Speci cations ......................................................... 49
Table of Contents
 
						

							1
Safety Precautions
WARNING 
 Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
Always be sure to ask a quali ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from 
being played with by young children, creating the potential risk of suffocation.
Do not place the Plasma Display on sloped or unstable surfaces.
•  The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display.
•  If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result 
in  re or electric shock. If any foreign objects get inside the Plasma Display, please consult your local Panasonic 
dealer.
Transport only in upright position!
• Transporting the unit with its display panel facing upright or downward may cause damage to the internal 
circuitry.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table 
cloths and curtains.
For suf cient ventilation;
If using the pedestal (optional accessory), leave a space of 20.0”/50 cm or more at the top, left, right and rear, 
and also keep the space between the bottom of the display and the   oor surface. If using some other setting-up 
method, follow the manual of it. (If there is no speci c indication of installation dimension in the installation 
manual, leave a space of 20.0”/50 cm or more at the top, left and right; 12.0”/30 cm or more at the bottom; and 
8.0”/20 cm or more at the rear.)• Pedestal .........................................................................  TY-ST152UX1
• Mounting Bracket ...........................................................  TY-WK152UX1
• HD-SDI Terminal Board with audio ................................ TY-FB10HD
• Dual Link HD-SDI Terminal Board .................................. TY-FB11DHD
• DVI-D Terminal Board .................................................... TY-FB11DD
 
						

							2
Safety Precautions
 When using the Plasma Display
The Plasma Display is designed to operate on 200 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
•  Doing so may cause the Plasma Display to overheat, which can cause  re or damage to the Plasma Display.
Do not stick any foreign objects into the Plasma Display.
•  Do not insert any metal or  ammable objects into the ventilations holes or drop them onto the Plasma Display, as 
doing so can cause  re or electric shock.
Do not remove the cover or modify it in any way.
•  High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection, 
adjustment and repair work, please contact your local Panasonic dealer.
Always use the breaker dedicated to the Plasma Display.  
• Using other breakers may generate heat and cause  re.
Do not turn on/off the breaker with wet hands. 
• Doing so may cause electric shocks.
When using a fused load switch, make sure a fuse of appropriate capacity is used. 
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. 
• Do not damage the cable, make any modi cations to it, place heavy objects on top of it, heat it, place it near any 
hot objects, twist it, bend it excessively or pull it. To do so may cause  re and electric shock. If the power cable is 
damaged, have it repaired at your local Panasonic dealer.
If the Plasma Display is not going to be used for any prolonged length of time, turn off the breaker.
To prevent the spread of  re, keep candles or other open  ames away from this product at all times. 
 If problems occur during use
If a problem occurs (such as no picture), or if smoke or an abnormal odour starts to come out from the Plasma 
Display, immediately turn off the breaker.
• If you continue to use the Plasma Display in this condition,  re or electric shock could result. After checking that 
the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing 
the Plasma Display yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet 
becomes damages, turn off the breaker.
• 
A short circuit may occur, which could cause  re. Contact your local Panasonic dealer for any repairs that need to be made.
 
						

							3
Safety Precautions
   CAUTION
 
 When using the Plasma Display 
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
•  Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands 
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma Display.
• If the Plasma Display is moved while some of the cables are still connected, the cables may become damaged, 
and  re or electric shock could result.
Before cleaning, turn off the breaker for your safety.
•  Electric shocks can result if this is not done.
Do not burn or breakup batteries.
•  Batteries must not be exposed to excessive heat such as sunshine,  re or the like.
This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or re ected light from your Plasma Display.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
•  If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in 
which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until 
the surface is dry.
• Do not scratch or hit the surface of the panel with  ngernails or other hard objects, otherwise the surface may 
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, 
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been 
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
•  Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get 
inside the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the 
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods 
in contact with articles made from rubber or PVC.
 
						

							4
Safety Precautions
WARNING 
 Small Parts
3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small 
children to avoid accidental ingestion.
 Disassembly
Do not disassemble or modify the 3D Eyewear.
 Lithium Battery
Batteries must not be exposed to excessive heat such as sunshine,  re or the like.
 
 
CAUTION
 
To enjoy 3D images safely and comfortably, please read these instructions fully.
 Use for commercial applications and public viewing
Someone in authority should responsibly convey the precautions for use of the 3D Eyewear to the user.
 3D Eyewear
Do not drop, exert pressure on, or step on the 3D Eyewear.
Always store the 3D Eyewear in the case provided when not in use.
Be careful of the tips of the frame when putting on the 3D Eyewear.
Be careful not to trap a  nger in the hinge section of the 3D Eyewear.
Pay special attention when children are using the 3D Eyewear. 
3D Eyewear should not be used by children younger than 5 - 6 years old, as a guideline. 
All children must be fully supervised by parents or guardians who must ensure their safety and health 
throughout the using 3D Eyewear.
3D Safety Precautions