Panasonic Th 103pf10wk Operating Instructions

1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input labelSignal
Power save
Setup
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Panasonic Auto (4 : 3)Off
4 : 3
[ 
AV  ]
P-NROff
1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input labelSignal
Power save
Setup
3D Y/C Filter (NTSC) 
Colour system 
Signal 
On 
Auto 
Cinema reality 
Panasonic...

Sync
Auto
Sync
on G
Sync
VBS
1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input labelSignal
Power save
Setup
Sync
P-NR
Signal
Auto
[ 
RGB ]
Cinema realityOff
Off
H-Freq.
V-Freq.kHz
Hz33.8
60.0
42
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Press to exit from adjust mode.
Setting RGB sync signal:
Con rm that the input is set to RGB input (this setting is valid only for RGB input 
signal).
Auto:...

Options 
Weekly Command Timer 
Initial VOL level 
1/3 
 
Off  Off 
0  0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP 
Initial INPUT  Onscreen display On 
O f f 
43
Options Adjustments
Item Effect Adjustments
Weekly 
Command 
TimerSets Weekly Command Timer. (see page 47)
Onscreen 
display
On Off
On:  Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after 
 was...

Options 
On Weekly Command Timer Onscreen display Off Initial INPUT 
1/3 
 
Maximum VOL level  Initial VOL level 
Button lock 
INPUT lock 
Advanced PIP  Remocon User level 
Off  Off 
0  0 
Off 
Off 
Off 
Off 
44
Options Adjustments
Item Effect Adjustments
Initial VOL 
level
Off On
Press  button to adjust the volume when the unit is turned on.
Off  On
Off:  Sets normal volume.
On:  Sets your preferred volume.
Notes:
• 
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your...

Options
EnableOff-timer function
NormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain
2/3
45
Options Adjustments
Item Effect Adjustments
Off-timer 
function
EnableDisable
Enable: Enables the “Off-timer function”.
Disable: Disables the “Off-timer function”.
Note: When “Disable” is set, the Off-timer is cancelled.
Initial Power 
ModeNormal  Standby  On
Sets the power mode of the unit for when the power recovers from failure or after plugging off 
and in...

3/3 Options 
O f f 
Off
Off V. lnstallation
Rotate
Slot1 Serial Slot Select Slot power Off
Power On Screen Delay
46
Options Adjustments
Item Effect Adjustments
Slot PowerOff  Auto  On 
Off:    Power is not transmitted to the slot power.
Auto:  Power is transmitted to the slot power only when main power is on.
On:    Power is transmitted to the slot power when main power is on or in the standby state.
Note:  In some cases, power is transmitted to the slot power when main power is on or in the standby...

Options 
On Weekly Command TimerOnscreen display 
1/3 
 
Weekly Command Timer 
On Program1Function Monday 
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
Program1On Monday Function 
Program3Tuesday 
--- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 01
02
1/8
--:-- 03--:-- 04--:--...

Weekly Command Timer 
20:00 
20:30 57 
58 
8/8 
 
22:00 59 --:-- 60 --:-- 
--:-- 61 --:-- 62 --:-- AVL:00 
DAM:NORM 
POF 
--- 
--- 
---  --- 
--- 63 64 
1Program
Weekly Command Timer 
8:00 
10:30 
02 01
1/8 
 
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12 PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
48Options Adjustments
Press to select a...

1/2 
Signal 
PC 
Off 
Standby save Off 
Power management Off 
Auto power off Off 
OSD Language English (
UK)  Component/RGB-in select 
RGB 
Input label 
Power save 
Setup 
SHIPPINGYES
49
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
3
4
Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold till the SHIPPING menu is 
displayed.
Press to select “YES”.
Press to con rm.
[from the unit]
1  Press the MENU button till the Setup menu is...

50
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
Picture and Brightness/Volume setting
(Check by pressing the power switch or stand-by button on the remote...