Panasonic System Controller Wv Cu550cj Operating Instructions

							Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WV-CU550CJ
System Controller
Operating Instructions
ALARM
  ACK
RESET
  AUX
 DEC
-1CAM INC
+1CAM
STOP
S
LO
W
E
S
C
S
E
T M
O
N
C
A
M
W
ID
E
F
A
RAFZ
O
O
M
T
E
LEF
O
C
U
S
 N
E
A
R R
E
S
E
TIR
IS
1
2
3
4
5
6
7
8
09
C
L
O
S
E
    O
P
E
N
1            2
BACK
 SEQFORWARD   SEQ
ALT
BUSY
F1
F2
F3
F4
System Controller WV-CU           CJ
550
ENGLISH
FRANÇAIS 
						

							2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ........................................................................................................................................ 3
PREFACE ...................................................................................................................................................................................... 4
FEATURES .................................................................................................................................................................................... 4
PRECAUTIONS ............................................................................................................................................................................. 5
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS  ...................................................................................................... 6
INSTALLATION ............................................................................................................................................................................. 9
SYSTEM INFORMATION  .............................................................................................................................................................. 10
SPECIFICATIONS ......................................................................................................................................................................... 11
STANDARD ACCESSORY  ............................................................................................................................................................ 11
MAJOR OPTIONAL UNITS AND ACCESSORIES ......................................................................................................................... 11
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No. WV-CU550CJ
Serial No.
Caution:
Before attempting to connect or operate this product,
please read the label on the bottom.
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference
when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example -
use only shielded interface cables when connecting to com-
puter or peripheral devices). Any changes or modifications
not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate this equip-
ment.
For U.S.A
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the products
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the litera-
ture accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SA 1965
SA 1966
ENGLISH VERSION 
						

							3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the points
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
ENGLISH 
						

							4
PREFACE
The WV-CU550CJ System Controller, when combined with the optional WJ-SX550C Matrix Switcher and WJ-AD550 Extension
Unit, allows for flexible control of 128 cameras and 16 monitors.
When used in a system with either Receivers (WV-RC100 or WV-RC150) or with Panasonic’s Combination cameras, the WV-
CU550CJ can control camera functions such as zoom and focus and can also control accessory equipment such as Pan/Tilt
Heads.
In addition, the WV-CU550CJ can control sequential switching in systems programmed from the Set Up Menu of the WJ-
SX550C Matrix Switcher.
FEATURES
The WV-CU550CJ System Controller, when combined with the WJ-SX550C Matrix Switcher and WJ-AD550 Extension Unit,
enables control of the following functions:
•Routing of up to 128 cameras to any one of 16 monitors
•Remote control of up to 128 cameras and auxiliary equipment by using optional receivers and accessories, including:
1. Remote control of Pan-Tilt Head and Camera Housing
2. Remote control of Motorized Zoom Lenses: Focus, Zoom and Iris
3. Remote control of camera settings, including Electronic Sensitivity Enhancement, Electronic Shutter, Electronic Zoom,
and more
•Selection of various sequence functions such as Program Sequence, Tour Sequence and Group Sequence
Additional features of the WV-CU550CJ include:
•Up to 8 WV-CU550CJ System Controllers can be connected in a system by using standard RS-485 shielded 4-wire twisted
pair cable. Can also be combined with standard communication media such as modems, fiber optics and microwave.
•Ergonomic design reduces the number of switches to only those with common functions. Secondary functions are
accessed through function keys.
•Single-handed control of pan/tilt, zoom, and auto focus functions 
						

							5
PRECAUTIONS
•Refer all work related to the installation of this
product to qualified service personnel or system
installers.
•Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
•Handle the appliance with care.
Do not strike or shake it, as this may damage the appli-
ance.
•Do not expose the appliance to water or moisture,
nor try to operate it in wet areas.
Take immediate action if the appliance becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personnel. Moisture may damage the appliance
and also cause electric shock.•Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
•Do not operate the appliance beyond its specified
temperature, humidity or power source ratings.
Use the appliance at temperatures within –10 °C to
+50 °C (14 °F to 122 °F) and a humidity below 90 %.
The input power source for this appliance is 120 V AC
60 Hz. 
						

							6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■Front View
System Controller WV-CU           CJ550
ALARMBUSY
F1F2
SETWIDE AF
ZOOM
TELE
ESC SLOWALT BACK
SEQ ACK
RESET
FORWARDSEQ
DEC
-1CAMAUXINC
+1CAMSTOP 2 1
F3F4
123
456
789
MON0CAM
CLOSE
OPEN IRIS
PRESET
FAR FOCUS
NEAR
qwrt
y
i!0!3!4!5!6!7!8!9 @2!1!2o
e
u
@3 @1 @0
CONTROLLER CONTROLLER
UNIT No.
1-8MODE DATA
TERM.
ON
ON OUT
OFFOFFIN
5432109876
@4@5@6@7@8@9
■Rear View 
						

							7
qAlarm Indicator (ALARM)
Blinks to indicate that an alarm condition exists.
It changes to steady light when the alarm is reset auto-
matically.
To turn the indicator off, press the ACK RESET button.
wBusy Indicator (BUSY)
Lights up when you attempt to control a monitor or a
camera that is already used by a higher priority opera-
tor, or when the higher priority operator selects the
monitor or camera you are currently operating.
Operations from the System Controller are disabled
until this indicator goes off.
eFunction Buttons (F1/F2/F3/F4)
Select functions displayed on the LCD (Liquid Crystal
Display) display.
rLCD (Liquid Crystal Display) Display
Displays function menus, numeric input, and system
status.
tDirection Buttons (A, B, D, C)
Select a function menu for display on the LCD display.
yZoom Wheel Controller
This control is used for zooming cameras equipped
with the specified lens. Moving the control to the right
will zoom in the image. Moving the control to the left will
zoom out the image.
uJoystick Controller (UP/DOWN/LEFT/RIGHT)
The joystick is used to manually operate the Pan/Tilt
Head, or move the cursor in the Matrix Switcher’s Setup
Menu on the active monitor screen.
iTop Button
Pressing this button will automatically set the lens focus
of a specified camera.
oIris Control Buttons (IRIS CLOSE, OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
When these buttons are pressed at the sometime for 3
seconds or more, the lens iris is reset to the factory
default setting.
!0Focus Control (FOCUS NEAR/FAR)
Adjust the lens focus of cameras equipped with the
specified lens.
!1Zoom Control (ZOOM TELE/WIDE)
This control is used for zooming cameras equipped
with the specified lens.!2Preset Button (PRESET)
Auto Focus Button (AF)
PRESET:This button, in combination with the Numeric
keys, is used to move the selected camera to a pre-
set position in a system equipped with the specified
cameras.
AF:Pressing this button will automatically set the lens
focus of a specified camera.
!3Camera (Set) Key [CAM (SET)]
CAM:Used for camera selection. To select a camera,
enter the desired camera number with the Numeric
keys, and then press the CAM key.
SET:This key, in combination with the Numeric keys, is
used to enter numeric input, such as operator ID
and password.
It is also used to execute the currently highlighted
selection and to enter a submenu in the Setup
Menu of the Matrix Switcher.
!4Numeric Keys (0 to 9)
These keys are used for numeric input into the system,
such as the camera and monitor number, sequence
number, preset position, etc.
!5Monitor (Escape) Key [MON (ESC)]
MON:This key is used to select a monitor.
To select a monitor, press the corresponding
Numeric keys, followed by the MON key.
ESC:This key is used to escape from the currently
highlighted selection on the Setup Menu of the
Matrix Switcher.
Pressing this key, while the Alternate (ALT) indicator is
on, will display the video that is connected to the
Monitor Input (MONITOR IN) Connector on the WV-
PB5504A Video Output Board.
!6Stop/Slow Button (STOP/SLOW)
STOP:Pauses a sequence that is being run on the
active monitor.
SLOW:For fine pan/tilt control, move the joystick while
holding down the SLOW button.
!7Increment Button (INC +1CAM)
When a sequence running in forward direction has
been paused with the STOP button, pressing this button
will move the sequence one frame to the next step (in
forward run direction). If the sequence was running in
reverse direction, the button will move the sequence
one frame to the next step (in reverse run direction).
This button is also used to select a camera. Pressing
this button will replace the currently selected camera
with the next higher camera number, if the active moni-
tor is in Spot mode. 
						

							8
!8Decrement Button (DEC –1CAM)
When a sequence running in forward direction has
been paused with the STOP button, pressing this button
will move the sequence one frame to the previous step
(in forward run direction). If the sequence was running
in reverse direction, the button will move the sequence
one frame to the previous step (in reverse run direc-
tion).
This button is also used to select a camera. Pressing
this button will replace the currently selected camera
with the next lower camera number, if the active monitor
is in Spot mode.
!9Auxiliary Button (AUX 1, 2)
These buttons toggle the auxiliary switches in the
Receiver on and off.
The auxiliary switches can be used, for example, to
activate equipment connected to the receiver, such as
lamps and buzzers.
@0Alternate Button (ALT)
This button activates the alternate function of dual-func-
tion control buttons.
@1Forward Sequence Button (FORWARD SEQ)
This button is used to run a selected Program or Tour
Sequence in forward direction on the active monitor.
It also restarts a sequence forward from the step that
was previously paused by pressing the Stop button.
@2Backward Sequence Button (BACK SEQ)
This button is used to restart a sequence backward
from the step that was previously paused by pressing
the Stop button.
@3Alarm Acknowledge and Reset Button (ACK RESET)
This button cancels an activated alarm. To cancel an
alarm, first select the alarmed monitor(s), then press the
ACK RESET button once for alarm acknowledgment
(the indicator on the button blinks rapidly), and finally
press it again for alarm reset (the indicator goes off).
After an alarm acknowledgment, pressing this button
while the Alternate (ALT) indicator is on will cancel all
currently activated alarms at the same time.
@4Data Ports (DATA IN, OUT)
Exchanges control data with the WJ-SX550C Matrix
Switcher in a system.
@5Termination Switch (TERM ON/OFF)
This switch enables termination of the controller’s data
port.
@6Controller Unit Number Switch (CONTROLLER UNIT
NO.)
This switch is used to identify the unit number of the
System Controller in multiple system controller applica-
tions. Up to eight controllers can be installed in a sys-
tem.@7Mode Selection Switch (MODE)
These switches are used to set the mode of the System
Controller connected to the Matrix Switcher. Set the
switches as shown below.
@8Controller On/Off Switch (CONTROLLER ON/OFF)
This switch is used to turn the WV-CU550CJ system
controller power on and off.
@9Power Cord
Normal Mode
CAM-P Mode
MODE
ON1234
MODE
ON1234
Refer to the Operating Instructions of the WJ-SX550C
Matrix Switcher for further details.
NOTE 
						

							9
■System Controller for the WJ-FS616 Series Video Multiplexer
When combined this System Controller with the optional WJ-FS616 Series Video Multiplexer, place the display sheets and label
on the controller shown below.
Refer to the Operating Instructions of WJ-FS616 Series for further details.
Note:Locate the System Controller in a level place.
INSTALLATION
ALAR
M
  ACK
RESET
  AU
X
 DEC
-1CAM INC
+1CAM
STO
P
SLOW
ESC
SET MON
CAM
WIDE
FARAFZOOM
TELEFOCUS
 NEAR RESETIRIS
1
2
3
4
5
6
7
8
09
CLOSE    OPEN
1            2BACK
 SEQFORWARD   SEQ
ALT BUSY
F1
F2
F3
F4
System Controller WV-CU           CJ
550 
						

							10
SYSTEM INFORMATION
Please note that the following functions were added to
improve the operation of the combination cameras.
■Additions
●Selection of Pan/Tilt Speed 
The Pan/Tilt speed can be changed by selecting a mode in
the menu (A1) displayed on the LCD display of the con-
troller.
1. Select the desired monitor and camera.
2. Select a mode by pressing the F3 or F4 button.
“❑” indicates the currently selected mode.
SLW:Moves the Pan/Tilt Head at lower speed.
FST:Moves the Pan/Tilt Head at higher speed.
3. Move the Joystick to move the Pan/Tilt Head in the
desired direction.
Note:Changing the Pan/Tilt speed by pressing the
STOP/SLOW button is enabled only when FST
mode is selected.
The above function is available in a system that includes
the following equipment:
WJ-SX550 Series Matrix Switcher
CPU Ver. 6.00 or later
Control Ver. 6.00 or later
WV-PB5548 Data Board Ver. 6.00 or later
■Version Information
●WJ-SX550 Series Matrix Switcher
The onscreen display indicates the version in “Cold Start”
or “Normal Start” during the power up procedure.
Note:x.xx is a version number.
Camera  cc        A1
Monitor mm  SLW 
 FST
F3F4F2F1
Matrix Switcher
ROM
CPUVer.
Control
AlarmX.XX
X.XX
X.XX
X.XX
X.XX No.1
Output
RS-485No.1
No.1
CPU
UnitPosition
01
Video
Character
VD/VS Model WJ-SX550C
Type Board SW.
No.
NTSC
1
VS Normal Start