Panasonic Sv Av20u Operating Instructions Manual

41
Disconnecting the USB 
Cable safely
If you use Windows XP/2000, remove the USB Cable 
using the following method.
If you use Windows Me/98SE, check that the Memory 
Card Access Lamp is out, then remove the USB 
Cable. (Keep the SD Multi AV Device turned on.)
1Double click the   in task tray.
≥Hardware disconnect dialog box appears.
2Select [USB Mass Storage Device] and 
click [Stop].
3Click [OK].
≥Click [OK], and you can safely disconnect the 
cable.
If you no longer need 
software (Uninstall)
1...

42
Constructing a Folder when 
the Memor y Card is used 
with a PC
≥When the Memory Card with data recorded by the 
SD Multi AV Device is inserted into a personal 
computer, folders will be displayed as in the figure.
≥Use the SD-MovieStage Ver.2.0 for operating files in 
the Memory Card.
[DCIM]: The images (IMGA0001.JPG etc.) in 
this folder are recorded in the JPEG 
format. ([100-0001] or similar 
indication is displayed on the SD 
Multi AV Device.)
[MISC]: Files in which DPOF Data has been 
set to the...

43
REC OFFPLAY
Others
Charge the built-in batter y 
for maintaining the date 
information
This built-in battery is used for the memory of date 
and time. If [PRESS MENU TO SET CLOCK] is 
displayed when the power is on, the built-in battery 
may be exhausted. Charge using the following 
procedure:
1Take the battery out and plug in the AC 
adaptor. (
l10)
2Turn the power off and leave the SD Multi 
AV Device as it is for approx. 12 hours. 
≥After recharging the built-in battery, adjust the date 
and time....

44
Indications
1Operation Mode
:Still picture mode
:Moving picture mode
:Audio mode
:Music mode
2Status Indications
Recording Mode
: Record (l20, 22, 24)
Playback Mode
1: Playback (l21, 23, 25, 26)
;: Pause (l23, 25, 26)
5/6: Cue Playback/Review 
Playback (l21, 23, 25, 26)
(10 times speed with  
k106 / 5 and 60 
times speed with  
k606 / 5)
: Slide show (l21, 32)
:Pausing of Slide show  
(l21, 32)
REVIEW: Checking the Recorded 
Image
ACCESS: Accessing a card
NO CARD: No card
NO FILE: No file
3Flash...

45
9Elapsed time indication
0h00m00s
[REC] mode:
Elapsed recording time
[PLAY] mode: 
Elapsed playback time
10Indication of recordable time and 
recordable number of images
R0:
Number of remaining recordable still 
pictures (Lights in red when it reaches 
zero.)
R 0h00m:
Remaining recordable time for MPEG4 
moving pictures or audio (VOICE) 
(Lights up in red when it reaches 
0h00m.)
11Repeat Playback (l23, 26)
: Repeats all files (all tracks).
: One file (one track)
12File Name (l21, 23, 25, 26)
13DPOF...

46
Notes & Precautions
ªCautions for Use
When you use your SD Multi AV Device 
on a rainy or snowy day or on a beach, 
make sure that no water or moisture 
enters the SD Multi AV Device.
≥Water may cause the SD Multi AV Device 
or Memory Card to malfunction. 
(Irreparable damage may occur.)
≥If sea water splashes onto the SD Multi AV 
Device, wet a soft cloth with tap water, 
wring it well, and use it to wipe the camera 
body carefully. Then, wipe it again 
thoroughly with a soft dry cloth.
Keep the SD...

47
If the Battery is used in an extremely 
cold environment, the Battery may only 
operate for approx. 5 minutes. If the 
Battery becomes extremely hot, a 
protective function may operate, and the 
Battery may become unusable for a 
while.
ªAbout the Lens
≥Do not touch the lens. Wipe the SD Multi 
AV Device with a soft dry cloth when the 
lens becomes unclean.
≥When the Lens is Fogged Up, turn off the 
SD Multi AV Device and leave the SD 
Multi AV Device in this condition for 
approx. 1 hour. When the...

48
Always Keep the Terminals of the 
Battery Clean
≥Prevent the terminals from getting clogged 
with dirt, dust, or other substances.
≥If you drop the Battery accidentally, check 
to see if the Battery body and terminals 
are damaged.
≥Attaching a deformed Battery to the SD 
Multi AV Device may damage the SD Multi 
AV Device.
ªNotes on the SD Memory Card 
Write-Protect Switch
≥The SD Memory Card has 
a write-protect switch. 
Sliding the switch to 
[LOCK] prevents the 
contents in the Memory 
Card from...

49
ªState of Power Lamp while 
charging
The Power Lamp flashes while charging. 
(Flashes approx. every 2 seconds when 
charging is normal.)
When the Power Lamps flashes more 
quickly or slowly (or turns off), some 
abnormality may have occurred.
The flashing speed suggests the following 
states.
Flashing approx. every 0.5 seconds:
≥The SD Multi AV Device, battery or AC 
adaptor may be defective. Contact your 
nearest Panasonic dealer.
Flashing approx. every 6 seconds:
≥The ambient temperature or that of...

50
≥Electrical noise, static electricity or failure 
of the SD Multi AV Device or the Memory 
Card may damage the Memory Card or 
erase the data stored on the Memory 
Card. It is recommended to save 
important data onto a personal computer.
≥Some cards may pop out when they are 
removed.
ªUsing the LCD Monitor (l12)
≥Forcefully rotating the LCD Monitor 
beyond ranges described in these 
operating instructions will damage the SD 
Multi AV Device.
≥Do not carry or store the SD Multi AV 
Device with the LCD...