Panasonic Studio Card Aw Pb305an Operating Instructions
Here you can view all the pages of manual Panasonic Studio Card Aw Pb305an Operating Instructions . The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.
Page 1
Before attempting to connect, operate or adjust this product, please read these instructions completely. Studio Card AW-PB305AN This product consists of an studio card and an interface bracket. F0806Y1116 D VQTB0134
Page 2
- - indicates safety information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. The lightning flash with...
Page 3
- 3 - indicates safety information. WARNING: • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS. USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK...
Page 4
- 4 - 1) Read these instructions. ) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) D o n o t b l o c k a n y v e n t i l a t i o n openings. Install in accordance with the manufacturer’s instructions. 8) D o n o t i n s t a l l n e a r a n y h e a t sources such as radiators, heat r e g i s t e r s , s t o v e s , o r o t h e r...
Page 5
- 5 - Contents Configuration ........................................ 5 Accessories .......................................... 5 Introduction ........................................... 6 Characteristics ...................................... 6 Precautions for use .............................. 6 Major operating controls and their functions ................................. 7 Studio card ....................................... 7 Interface bracket .............................. 8...
Page 6
- 6 - Characteristics An inter-communications headset can be used and its volume adjusted. The STANDBY/ON switch function of the viewfinder (WV-VF65B, AW-VF80) is incorporated. Output signals (brightness and composite video signals) to the viewfinder can be switched using the menu settings. Zebra pattern and safety zone displays appearing in the viewfinder can be switched using the menu settings. The VIDEO ON/OFF switch function of the viewfinder (AW-VF64) is incorporated....
Page 7
- 7 - Major operating controls and their functions Studio card EVF connector [EVF] The EVF cable 7 from the interface bracket is connected here. 2 EVF standby / VIDEO ON/OFF switch [ST.BY / VIDEO ON/OFF] ST.BY : Places the viewfinder in standby mode. ON : Outputs images to the viewfinder. VIDEO ON : Outputs images to the viewfinder. VIDEO OFF : No images appear on the viewfinder. The AW-VF64 does not come with a standby function. 3 Inter-communications level control [LEVEL]...
Page 8
- 8 - Major operating controls and their functions Interface bracket 5 EVF connector 1 [EVF1] The viewfinder (WV-VF65B, AW-VF80) is connected here. 6 EVF connector 2 [EVF2] The viewfinder AW-VF64 is connected here. 7 EVF cable This is connected to the EVF connector on the studio card. 8 TALLY input connector [TALLY IN] This is the tally control external input connector. OPEN : TALLY OFF SHORT : TALLY ON When using the AW-CB400 remote operation panel and AW-CA50T8G control cable for...
Page 9
- 9 - Installing the studio card Always ask your local dealer to install the studio card. Rear panel Optional card slot cover 4 screws 5/16” (8 mm)2 screws 1/4” (6 mm) Studio card 1 Turn the power to the camera off and remove any cables which are connected to the power connector or other connectors. 2 Loosen the 4 screws [5/16” (8 mm)] on the rear panel of the camera, then remove the panel itself. 3 Loosen the screws [1/4” (6 mm)] on the optional card slot cover, then remove the cover. 4...
Page 10
- 10 - Mounting the bracket on a tripod 1 Mount the interface bracket on the tripod. (Screw: 1/4 – 0 UNC) Mounting the camera 2 Mount the camera (in which the studio card has been installed) on the interface bracket. Fasten the fixing knob to firmly secure the camera. Mounting the viewfinder on a bracket 3 Mount the mounting base that is supplied to the viewfinder onto the top of the interface bracket using the screws provided. ( Mount the base securely so that it is...