Panasonic Single Convector Aw Ex500n Operating Instructions

=
Function setting switch 2
This is used to select the operations of the AW-EX500.
Before changing a setting, the power must be turned off.
The setting items are shown below.
1: Output signal setting 1 [D-SUB OUT SEL1]

(Factory setting: RGB, YR-YB-Y)
2: Output signal setting 2 [D-SUB OUT SEL2]
(Factory setting: YR-YB-Y)
These are used to select the signals to be output to pins
#3, #4 and #5 of analog video output connector 1.
The switch combinations are shown below.
- 11 -3: Analog RGB output SYNC...

- 12 -
Connections
• Before proceeding with the connections, turn off the power.
• Use the AW-PS505 AC adaptor to supply the power.
Use the AW-CA4T1 power cable.
• For further details on connecting the devices, refer to the operating instructions accompanying
the devices concerned.
• For further details on operating the devices, refer to the operating instructions accompanying
the devices concerned. 

- 13 -
$Analog signal input
OPTION  CARDOPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO IN
Convertible  Camera AW —E600
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
*1: For further details on the connections between the
optional cards and devices, refer to the operating
instructions accompanying the cards concerned.
*2: An AW-PB3** card and an AW-PB5** card cannot
be used at the same time.
*3: The AW-PB302, AW-PB304, AW-PB307, AW-PB309
and...

- 14 -
Connections
OPTION  CARDOPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO IN
Convertible  Camera AW —E600
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
$SDI signal input
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504*
2
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504*
2
Zoom Lens Camera + SDI Card
AW-EX500 AW-EX100
DC Power Cable
AW-CA4T1
AC adaptor AW-PS505
AC120V
60HzWV-CA9T5 SDI OUTCoaxial cable
(BELDEN 8281 or...

- 15 -
Attaching the rubber feet
• Adhere the accessory rubber feet to the bottom panel
when the AW-EX500 is to be placed on the floor for use.
Rubber feet
Standard accessories
ORubber feet  ..................................................................... 4 

OPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO INAW-
5-11/16”
(145 mm)3/8”
(10 mm)
3-3/4”
(96 mm)
3-5/16”
(84 mm)
- 16 -
Appearance
Unit: inch (mm)
Dimensions: 3-5/16” (W) ~3-3/4” (H) ~6-1/8” (D)
84 ~96 ~155 mm
Weight: Approx. 1.98 lbs (0.9 kg) 

- 17 -
Specifications
Input
DC 12V power input connector
270Mbps SDI (BNC) (SMPTE259M standard-compliant) Only video data supported
Analog composite (BNC) 1.0Vp-p (0% setup level)
Analog Y/C (BNC) Y: 1.0Vp-p (0% setup level)
(BNC) C: 0.286Vp-p
Analog component Y: 1.0Vp-p (0% setup level)
(BNC) (714/700mVp-p selectable by switch)
(BNC) R-Y, B-Y: 756/525mVp-p (selectable by switch)
Audio (stereo mini jack)–20dBV, 1 kΩinput impedance
Output
Analog composite 1.0Vp-p (0% setup level)
Analog Y/C Y: 1.0Vp-p (0%...

- 18 -
Specifications
Input/output interface: RS-232C
Operating temperature: 14°F to 113°F (–10°C to +45°C)
Operating humidity: 30 % to 90 % (without condensation)
Dimensions (W!H!D): 3-5/16”!3-3/4”!6-1/8” [84!96!155 mm]
Weight: Approx. 1.98 lbs (0.9 kg)
Switch/control functions:• INPUT SEL1 SDI/ANALOG
• INPUT SEL2 YR-YB-Y, YC/VIDEO
• INPUT SEL3 YR-YB-Y/YC
• INPUT LEVEL Y 714mV/700mV
• INPUT LEVEL R-YB-Y 756mV/525mV
• RS232C SEL ADDITIONAL IF/OPTION IF
• PB302 OUT SEL (OPT) YR-YB-Y/RGB
• PB302 OUT SEL...

- 19 - 

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7000
EASTERN ZONE:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500...