Panasonic Signal Converter Aw Ex500n Operating Instructions

							=
Function setting switch 2
This is used to select the operations of the AW-EX500.
Before changing a setting, the power must be turned off.
The setting items are shown below.
1: Output signal setting 1 [D-SUB OUT SEL1]

(Factory setting: RGB, YR-YB-Y)
2: Output signal setting 2 [D-SUB OUT SEL2]
(Factory setting: YR-YB-Y)
These are used to select the signals to be output to pins
#3, #4 and #5 of analog video output connector 1.
The switch combinations are shown below.
- 11 -3: Analog RGB output SYNC addition setting

(Factory setting: SYNC OFF)
This is used to set whether to add the SYNC signal to
the RGB signals when RGB has been selected as the
analog video output setting.
At SYNC ON, the SYNC signal is added to the R, G
and B signals.
4: Not used 
(Factory setting: OFF)
Keep this at the factory setting.
>
Additional card slot
Remove the cover, and connect the AW-EX100 additional
card box.
1
2
3
4O
N
D-SUB OUT SEL1 D-SUB OUT SEL2Output signal
RGB, YR-YB-Y YR-YB-Y Component
RGB, YR-YB-Y RGB RGB
Y/C YR-YB-Y Y/C
Y/C RGB Y/C
ON OFF SW NO—— —— NOT USE 4SYNC ON SYNC OFF RGB OUT SYNC 3RGB YR-YB-Y D-SUB OUT SEL 2 2
YC RGB, YR-YB-Y D-SUB OUT SEL 1 1 
						

							- 12 -
Connections
• Before proceeding with the connections, turn off the power.
• Use the AW-PS505 AC adaptor to supply the power.
Use the AW-CA4T1 power cable.
• For further details on connecting the devices, refer to the operating instructions accompanying
the devices concerned.
• For further details on operating the devices, refer to the operating instructions accompanying
the devices concerned. 
						

							- 13 -
$Analog signal input
OPTION  CARDOPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO IN
Convertible  Camera AW —E600
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
*1: For further details on the connections between the
optional cards and devices, refer to the operating
instructions accompanying the cards concerned.
*2: An AW-PB3** card and an AW-PB5** card cannot
be used at the same time.
*3: The AW-PB302, AW-PB304, AW-PB307, AW-PB309
and AW-PB504 do not support audio input.
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504
*2
When the AW-E800A, AW-E600, AW-E300A or AW-E300 is
used as the camera, the AW-PB302 card must be plugged
into the camera in order for the AW-CA50T6 to be used.
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504*
2
Use a cable compensator as required. Coaxial cable (BELDEN 8281 or equivalent)
VIDEO ...........................1
Y/C ................................2
Component ....................3 Coaxial cable for
video signals
VIDEO OUT
Zoom Lens Camera
AW-EX500 AW-EX100
DC Power Cable
AW-CA4T1
AC adaptor AW-PS505
AC120V
60Hz –20dBvWV-CA9T5
Microphone*
3
AmplifierCompensator
or
for Y/C, Component signal
AW-CA50T6
Video monitor 
						

							- 14 -
Connections
OPTION  CARDOPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO IN
Convertible  Camera AW —E600
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
$SDI signal input
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504*
2
Optional card*1
AW-PB302
PB304
PB307
PB309
PB310
PB504*
2
Zoom Lens Camera + SDI Card
AW-EX500 AW-EX100
DC Power Cable
AW-CA4T1
AC adaptor AW-PS505
AC120V
60HzWV-CA9T5 SDI OUTCoaxial cable
(BELDEN 8281 or equivalent)
Max. 200 m
*1: For further details on the connections between the
optional cards and devices, refer to the operating
instructions accompanying the cards concerned.
*2: An AW-PB3** card and an AW-PB5** card cannot
be used at the same time.
*3: The AW-PB302, AW-PB304, AW-PB307, AW-PB309
and AW-PB504 do not support audio input.
Amplifier
Microphone*3
Video monitor 
						

							- 15 -
Attaching the rubber feet
• Adhere the accessory rubber feet to the bottom panel
when the AW-EX500 is to be placed on the floor for use.
Rubber feet
Standard accessories
ORubber feet  ..................................................................... 4 
						

							OPTION CARDY/Y/VIDEO IN
R-Y/C
IN
B-Y
IN
DC12V IN
VIDEO/RGB/COMPONENT/YC OUT
RS232C
SDI
IN
AUDIO INAW-
5-11/16”
(145 mm)3/8”
(10 mm)
3-3/4”
(96 mm)
3-5/16”
(84 mm)
- 16 -
Appearance
Unit: inch (mm)
Dimensions: 3-5/16” (W) ~3-3/4” (H) ~6-1/8” (D)
84 ~96 ~155 mm
Weight: Approx. 1.98 lbs (0.9 kg) 
						

							- 17 -
Specifications
Input
DC 12V power input connector
270Mbps SDI (BNC) (SMPTE259M standard-compliant) Only video data supported
Analog composite (BNC) 1.0Vp-p (0% setup level)
Analog Y/C (BNC) Y: 1.0Vp-p (0% setup level)
(BNC) C: 0.286Vp-p
Analog component Y: 1.0Vp-p (0% setup level)
(BNC) (714/700mVp-p selectable by switch)
(BNC) R-Y, B-Y: 756/525mVp-p (selectable by switch)
Audio (stereo mini jack)–20dBV, 1 kΩinput impedance
Output
Analog composite 1.0Vp-p (0% setup level)
Analog Y/C Y: 1.0Vp-p (0% setup level)
C: 0.286Vp-p
Analog component Y: 1.0Vp-p (0% setup level)
R-Y, B-Y: 756mVp-p
Analog RGB RGB: 0.7Vp-p
SYNC: 0.3Vp-p (SYNC ON/OFF selectable by switch)
SYNC 4Vp-p Power requirements:12 V DC
Power consumption:6.85 W
indicates safety information. 
						

							- 18 -
Specifications
Input/output interface: RS-232C
Operating temperature: 14°F to 113°F (–10°C to +45°C)
Operating humidity: 30 % to 90 % (without condensation)
Dimensions (W!H!D): 3-5/16”!3-3/4”!6-1/8” [84!96!155 mm]
Weight: Approx. 1.98 lbs (0.9 kg)
Switch/control functions:• INPUT SEL1 SDI/ANALOG
• INPUT SEL2 YR-YB-Y, YC/VIDEO
• INPUT SEL3 YR-YB-Y/YC
• INPUT LEVEL Y 714mV/700mV
• INPUT LEVEL R-YB-Y 756mV/525mV
• RS232C SEL ADDITIONAL IF/OPTION IF
• PB302 OUT SEL (OPT) YR-YB-Y/RGB
• PB302 OUT SEL (ADD) YR-YB-Y/RGB
• OPTION I/F SEL PB302/PB310
• ADDITIONAL I/F SEL PB302/PB310
• D-SUB OUT SEL1 YC/RGB, YR-YB-Y
• D-SUB OUT SEL2 RGB/YR-YB-Y
• RGB OUT SYNC SYNC ON/SYNC OFF
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice. 
						

							- 19 - 
						

							PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7000
EASTERN ZONE:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850   (301) 738-3840
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3   (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630  (787) 750-4300